Single Variable Outputs DC Power Supply
Project Description :
| Capacity | Models |
| 0 to 5 Volts, 0 to 5 amps | 30C |
| 0 to 5 Volts, 0 to 10 amps | 30D |
| 0 to 15 V, 0 to 2 amps | 34B |
| 0 to 15 V, 0 to 5 amps | 34C |
| 0 to 15 V, 0 to 10 amps | 34D |
| 0 to 30 V, 0 to 1 amps | 92A |
| 0 to 30 V, 0 to 2 amps | 92B |
| 0 to 30 V, 0 to 5 amps | 92C |
| 0 to 30 V, 0 to 10 amps | 92D |
| 0 to 60 V, 0 to 1 amps | 36A |
| 0 to 60 V, 0 to 2 amps | 36B |
| 0 to 60 V, 0 to 5 amps | 36C |
| 0 to 120 V, 0 to 1 amps | 31A |
| 0 to 120 V, 0 to 2 amps | 31B |
| 0 to 300 V, 0 to 100 mA | 32 |
| 0 to 300 V, 0 to 300 mA | 32B |
| 0 to 300 V, 0 to 500 mA | 32C |
| 0 to 300 V, 0 to 1 A | 32E |
- Short circuit and overload protected
- ± 0.05% from no load to full load Regulation
- Ripples less than 3 mV
- Power Requirement 230 ± 10% VAC, 50 / 60 Hz
Dual Variable Outputs DC Power Supply
Project Description :
| Capacity | Model |
| 0 to ± 15 V dual, 0 to 2 amps | 35B |
| 0 to ± 30 V dual, 0 to 5 amps | 93C |
- Output Voltages : Two independent output voltages (both positive or both negative or one positive and one negative)
- Load currents : Both outputs are displayed on two seperate 3 1/2 meters
- Protection : Short circuit and Overload protected Ripples Less than 3 mV rms
- Regulation : ± 0.05% from no load to full load
Power Supply, Programmable
Project Description :
| Features | Model |
| DC 30V / 2A; 5V / 2A (Auxiliary), RS232 Interface | PSD9001 |
| DC 30V / 2A; 5V / 2A (Auxiliary), Numeric Keys, RS232 Interface with Software | PSD9002 |
| DC 2 X 30V / 2A, Both Programmable, Numeric Keys, RS232 & USB Interface with Software | PSD9003 |
| DC 2 X 30V / 2A, Both Programmable, LCD, Numeric Keys, RS232 & USB Interface with Software | PSD9004 |
| DC 2x30V/ 1A; Programmable, Tracking, 5V/5A, LCD, Numeric Keys, RS232/USB Interface with Software | PSD9005 |
- Programmable DC 0 to 30V- 2A , Auxiliary 5V- 2A
- Electronic Fuse for output
- Last setup save
- Constant Voltage & Constant Current modes
- Adjustable Current Limiter
- Output ON/ OFF control
- Serial Interface RS232 standard, USB Interface (optional)
Power Supply, Triple, HM7042-5
Project Description :
- 2 x 0…32V/0…2A 1 x 0…5.5V/0…5A
- High-Performance and inexpensive Laboratory Power Supply
- Floating, overload and short-circuit proof Outputs
- Separate Voltage and Current Displays for each Output, 4 Digits at Channel 1+3; 3 Digits at Channel 2
- Display Resolution: 10mV/1mA at Channel 1+3; 10mV/10mA at Channel 2
- Protection of sensitive Loads by Current Limit or Electronic Fuse
- Pushbutton for activating/deactivating all Outputs
- Low Residual Ripple, high Output Power, very good Regulation
- Parallel (up to 9A) and Series (up to 69.5V) Operation
- Temperature-controlled Fan
Power Supply, Arbitrary
Project Description :
- 2 x 0…30 V/0…2 A 1 x 5 V/0…2 A
- Display Resolution 10 mV/1 mA
- Parallel (up to 6 A) and Series (up to 65 V) Operation
- Electronic Load up to 60 W per Channel (max. 2 A)
- Arbitrary Waveform Power Supply (4096 Points, 12 Bit):
- Creation of customized Waveforms
- Software for Remote Control and for Creation of Arbitrary Waveforms
- Electronic Fuse and Tracking Mode for 30 V Outputs
- External Modulation of Output Voltages:
- Input Voltage 0…10 V, Bandwidth 50 kHz
- Sense Lines for Compensation of the Voltage drop across the Cables
- Multimeter Mode for all adjustable Outputs
- Galvanically isolated USB/RS-232 Interface, optional IEEE-488 (GPIB) in HM8143G
Power Supply, Double High-Performance, HMP2030
Project Description :
- 1 x 0…32 V/0…10 A 1 x 0…32 V/0…5 A 188 W max.
- 3 x 0…32 V/0…5 A 188 W max.
- 188 W Output Power realized by intelligent Power Management
- Low Residual Ripple: High Setting- and Read-Back Resolution of 1 mV up to 0.1 mA
- Galvanically isolated, earth-free and short circuit protected Output Channels
- Advanced Parallel- and Serial Operation via V/I Tracking
- EasyArb Function for free definable V/I Characteristics
- FuseLink: Individual Channel Combination of Electronic Fuses
- Free adjustable Overvoltage Protection (OVP) for all Outputs
- All Parameters clearly displayed via LCD/Illuminated Buttons
- Rear Connectors for all Channels including Sense
- USB/RS-232 Interface, optional Ethernet/USB or IEEE-488 (GPIB)
Power Supply, Triple High-Performance, HMP4030
Project Description :
- 3 x 0...32V/0...10A, 384W max.
- Low residual ripple: ‹150µVrms due to linear post regulators
- High setting- and read-back resolution of 1mV/0.2mA
- Keypad for direct parameter entry
- Galvanically isolated, earth-free and short circuit protected output channels
- Advanced parallel- and serial operation via V/I tracking
- EasyArb function for free definable V/I characteristics
- FuseLink: individual channel combination of electronic fuses
- Free adjustable overvoltage protection (OVP) for all outputs
- All parameters clearly displayed via LCD/glowing buttons
- Rear connectors for all channels including sense
- USB/RS-232 Interface, optional Ethernet/USB or IEEE-488
Power Supply, Quadruple High-Performance
Project Description :
- 3x0...32V/0...10A, 384W max.
- 4x0...32V/0...10A, 384W max.
- Low residual ripple: ‹150µVrms due to linear post regulators
- High setting- and read-back resolution of 1mV/0.2mA
- Keypad for direct parameter entry
- Galvanically isolated, earth-free and short circuit protected output channels
- Advanced parallel- and serial operation via V/I tracking
- EasyArb function for free definable V/I characteristics
- FuseLink: individual channel combination of electronic fuses
- Free adjustable overvoltage protection (OVP) for all outputs
- All parameters clearly displayed via LCD/glowing buttons
- Rear connectors for all channels including sense
- USB/RS-232 Interface, optional Ethernet/USB or IEEE-488
Mainframe, power supply for 2 modules
Project Description :
- Basic Unit for Modules of the Modular System Series 8000.
- Power Supply for 2 Modules.
- DC Voltages electronically regulated, floating and short-circuit proof.
- Power Transformer with thermal Fuse.
- Up to 5 Mainframes can be stacked.
- Module HM800 for customized Instrument Construction available.
- 4 BNC Connectors on the Rear Panel of the HM8001-2 (Option HO801) provide for Signal Transmission to or from HM8021-4 and HM8030-6 Modules
Power Supply, Triple, HM8040-3
Project Description :
- 2 x 0…20V/0.5A 1 x 5V/1A.
- 3-Digit switchable Displays (Display Resolution 0.1V/1mA).
- Pushbutton for Activating/Deactivating all Outputs.
- Adjustable Current Limiting and Electronic Fuse.
- Low Residual Ripple and Low Noise.
- Mainframe HM8001-2 required for operation.
Constant Current Power Supply for EMU-50V, EMU-50T
Project Description :
- Current Range : Smoothly adjustable from 0–4 A
- Load Regulation : 0.1% for load variation from 0 to max.
- Line Regulation : 0.1% for ±10% mains variation
- Display : 3½ digit, 7 segment LED DPM
- Power : 220 V ±10%, 50 Hz
Power Supply, 3 Channels Programmable DC, 80 W
Project Description :
• Linear Power Supply design for improved performance
• Full color display with real time Volts, Amps, and Watts readout
• Wave Track monitors outputs over time
• GPIB, LXI-C (Ethernet), USB host & device interfaces all standard
• Program channels to automatically change value over time
• Save and store setups on flash memory drive
Power Supply, 2 Channels Programmable DC, 160 W
Project Description :
• Single Channel, 160 Watt Power Supply
• Linear Power Supply design for improved performance
• Full color display with real time Volts, Amps, and Watts readout
• Wave Track monitors outputs over time
• GPIB, LXI-C (Ethernet), USB host & device interfaces all standard
• Program channels to automatically change value over time
• Save and store setups on flash memory drive
