The Rish Flex 15048A is a Power Supply of Single Phase.
The Rish Flex 15048A is a Power Supply of Single Phase.
The Rish Flex 15048A is a Power Supply of Single Phase.
This features allows the use of a smaller size unit to
power demanding loads such as motors, solenoid valves,
lamps and other loads with transient overload behavior
which would otherwise required an oversize power supply.
nput: single-phase: 115 – 230 Vac
Output: 48 Vdc 60°C
Efficiency up to 91%
DIN Rail Mountable
Flexible Power continuity :from 120 to 150 W
Strong overload without switch-off, up to 50%
For more details please refer datasheet.
The Rish Flex 15048A is a Power Supply of Single Phase.
This features allows the use of a smaller size unit to
power demanding loads such as motors, solenoid valves,
lamps and other loads with transient overload behavior
which would otherwise required an oversize power supply.
nput: single-phase: 115 – 230 Vac
Output: 48 Vdc 60°C
Efficiency up to 91%
DIN Rail Mountable
Flexible Power continuity :from 120 to 150 W
Strong overload without switch-off, up to 50%
For more details please refer datasheet.
N30 is a 5-Digit 3 coloured LED display meter programmable as interval or limit in 3 ranges through PD14 programmer/ LPConfig software.
The N30O meter is destined for the measurement of pulses, frequency, rotational speed, period and worktime.
This is the default factory setting of all FLEX units. In case of short-circuit or overloading, the output current is interrupted. The device tries again to re-establish output voltage and normal condition about every 2 second till the problem is cleared.
RISH CD30/60 Compact VAF Meter measures electrical parameters in 1 Phase Network for AC direct current measurement application.