Programable Multifunction Transducer ( Mxx Series)
The RISH Ducer MXX series of multi-transducers simultaneously measure several variables of an electric power system and process them to produce 2 or 3 or 4 analogue output signals. 2 or 4 digital outputs are available for signaling limits or power meterin
Product Overview
The RISH Ducer MXX series of multi-transducers simultaneously measure several variables of an electric power system and process them to produce 2 or 3 or 4 analogue output signals. 2 or 4 digital outputs are available for signaling limits or power meterin
The RISH Ducer MXX series of multi-transducers
simultaneously measure several variables of an
electric power system and process them to produce
2 or 3 or 4 analogue output signals. 2 or 4 digital
outputs are available for signaling limits or power
metering. For two of the limit outputs up to 3
measurands can be logically combined.
For all heavy-current power system variables
Up to 6 outputs (2A + 4D or 4A + 2D or 2A or 3A
Input voltage up to 693 V (phase-to-phase)
Universal analogue outputs (programmable)
Provision for either snapping the transducer onto top
hat rails or securing it with screws to a wall or pan
For more details please refer datasheet.
Technical Specifications
The RISH Ducer MXX series of multi-transducers
simultaneously measure several variables of an
electric power system and process them to produce
2 or 3 or 4 analogue output signals. 2 or 4 digital
outputs are available for signaling limits or power
metering. For two of the limit outputs up to 3
measurands can be logically combined.
For all heavy-current power system variables
Up to 6 outputs (2A + 4D or 4A + 2D or 2A or 3A
Input voltage up to 693 V (phase-to-phase)
Universal analogue outputs (programmable)
Provision for either snapping the transducer onto top
hat rails or securing it with screws to a wall or pan
For more details please refer datasheet.
Talk To Our Technical Experts
Related Products
Dual Output Transducer (Rish CON CA /CON CV)
The transducer RISH CON - CA/CV converts a sinusoidal AC Current or AC Voltage into a load independent DC Current or a load independent DC Voltage proportional to the measured value.
Frequency Transducer ( Rish Con Hz)
The Rish CON - Hz transducer is used for frequency measurement. The output signal is proportional to measured frequency and is either load independent DC Current or load independent DC Voltage
Isolating Amplifier Unipolar/Bipolar (Rish ducer TV808)
The purpose of the isolating amplifier RISH Ducer TV 808 is to electrically insulate input and output signals, respectively to amplify and / or change the signal level or type (current or voltage) of the input signals
Programmable Single output DC Isolator (RISH PI-101)
The purpose of the RISH PI-101 is to electrically isolate input, output and power supply.