20MHz 2-Channel Digital Oscilloscope - Extech MS420 - EXTECH
Extech's MS420 20 MHz 2-Channel Digital Oscilloscope
offers a range of capabilities for effective
troubleshooting of electronics and electronically
controlled electrical systems.
With 20 MHz bandwidth and conveniences like auto-set
which optimizes the position, range, time base,
and triggering to assure a stable display of virtually
any waveform, the MS420 can be used in field
repairs or bench duty.
To identify subtle problems, Peak Detect features a
fast 50 ns glitch capture.
For more details please refer datasheet.
|
Digital Storage Oscilloscope (DSO) CRO 20 /30 / 60MHz Dual Channel - ME 3020 / 3030 / 3060 - MARS
DC ~ 20MHz(ME 3020),30MHz(ME 3030/ME 3030F),
60MHz (ME 3060)
Inbuilt 6 Digit seven segment display frequency
counter(30MHz)Only in ME3030F
CH 1 increment amplification function for clear
display (Only in ME 3060).
Dual channel, X Y mode
TV synchronous separation circuit to observe stable
TV signal.Polarity reversal, CH 1Sync output
For more details please refer datasheet.
|
CRO 20MHz Dual Channel with Component Tester Oscilloscope - ME 3020CT - MARS
DC ~ 20MHz(ME 3020CT)
With component tester
Dual channel/Dual tracing, X-Ymode
6" display cathode ray tube, sensitivity
triggering up to 1mV/divison
TV synchronous separation circuit to observe
stable TV signal
Vertical Operation Mode : CH1,CH2,ADD,ALT,CHOP
Sensitivity : 5mV/div to 20V/div +3%,
For more details please refer datasheet.
|
Digital Storage Oscilloscope (DSO) - ME 4050CA - MARS
Digital Storage Oscilloscope (DSO) Band width
& Sampling rate - 50 Mhz DSO
ME 4050CA (1GS/s) 7 color TFT LCD Display ,
Resolution 800 x 480 pixels Auto-Setting f
or quick setup and waveform acquisition
Bandwidth : 50MHz
Sample Rate :1GS/s
Display :7ï TFT LCD Display, Resolution 800x480 pixels
Horizontal Scale : 5ns/div-1000s/div
For more details please refer datasheet.
|
Analog Oscilloscopes 60MHz (with CRT Readout) - ME 3060 - MARS
DC-60MHz(ME 3060) Dual channel/Dual tracing, X-Y mode
6" display, high brightness CRT with scale illumination control
High sensitivity triggering, up to 1mV/divison
CH1 channel incremental amplification function for
clearer display
TV synchronous separation circuit to observe stable
TV signal
X-x10/Y-x5,
Polarity reversal, CH 1Sync outpu
Display mode CH1, CH2, ADD, ALT, CHOP (CH1, CH2)
For more details please refer datasheet.
|
Analog Oscilloscopes 60MHz (with CRT Readout) - ME 3060CR - MARS
DC-60MHz(ME 3060CR) with CRT readout
Three channel/six traces with delayed scanning
6" display cathode ray tube, High sensitivity
triggering, up to 1mV/divison.
X-x10/Y-x5, Polarity reversal
CRT digital cursor readout, HOLD OFF function
CH1: Maximum 400V input voltage
Scan speed up to 50ns/division
6" Rectangular screen with internal
graticule, 8x10 divisions (1div=1cm)
Frequency DC ~ 60MHz
For more details please refer datasheet.
|
Digital Storage Oscilloscopes 25MHz/60MHz/100MHz - 4000 Series - MARS
Digital Storage Oscilloscopes 25MHz/60MHz/100MHz
Bandwidth: 25MHz (ME 4025M),100MHz (ME 4100M, ME 4100C),
60MHz (ME4060M, ME 4060C)
Real-time Sample Rate: 250 MSa/s
Equivalent Sampling Rate: 50 GSa/s
Channels : Dual
Memory: 4K-1M per channel
Display: Mono LCD ( ME 4025M, ME 4060M, ME 4100M)
Color LCD ( ME 4060C, ME 4100C)
Autoset, Auto Calibration
Ultrazoom: Enable fine display while viewing details
For more details please refer datasheet.
|
Digital Storage Oscilloscopes 100MHz, 200MHz, 350MHz, 500MHz - WAVEJET® 300 SERIES - MARS
DSO 100MHz,200MHz,350MHz,500MHz
Measure: Base, Cycle Mean, Cycle RMS,
Duty Cycle, Fall Time (90–10%), Fall Time
(80–20%), Frequency, Integral, Maximim, Mean,
Minimum, Number of +Pulses, Number of -Pulses,
+Overshoot,-Overshoot, Peak-Peak, Period,
+Pulse Width, -Pulse Width, Rise Time (20–80%),
Rise Time (10–90%), RMS, Skew, Skew@level, Top-Base.
Zoom: Use the front panel QuickZoom button to zoom
all wavefo in a separate zoom grid.
Math: Sum, Difference, Product, FFT (up to 8 kpts
with Rectangular, Hanning or Flat Top)
For more details please refer datasheet.
|
