Product Overview

3-Phase 4-Wire Power Quality Analyzer 
Compliant to IEC61000-4-30 Class S Standards  
On-screen Guide to Deliver Easy Setup and Testing
Voltage ranges:1000.0 V rms or DC, 
Transient measurement 2.200 kV peak
Current ranges:50.000 mA AC to 5.0000 kA AC,
10.000 A DC to 2.0000 kA DC
Power ranges:50.000 W to 6.0000 MW
For more details refer datasheet.

Product Overview

Investigate Power Characteristics,
Analyze the Causes of Problems 
Voltage ranges:600.00 V rms
Transient measurement 6.0000 kV peak
Current ranges:500.00 mA to 5.0000 kA AC
Power ranges:300.00 W to 3.0000 MW
Basic accuracy:Voltage: ±0.1% of nominal voltage
Current: ±0.1 % rdg. ±0.1 % f.s.
Active power: ±0.2 % rdg. ±0.1 % f.s.
For more details refer datasheet.

Product Overview

Measure AC/DC Standby Power Up to Large Power Loads
Measurement lines:Single-phase/two-wires
Measurement items:Voltage, current, active power, 
apparent power, reactive power, power factor, 
phase angle, frequency, maximum current ratio, 
current integration, active power integration, 
integration time,voltage waveform peak value, 
current waveform peak value, voltage crest factor, 
current crest factor, time average current, 
For more details refer datasheet.

Product Overview

2-Channel AC/DC Power Meter for Single-Phase to 3P3W 
Equipment such as Motors,Inverters,Power Conditioners
Measurement lines:
Single-phase 2-wires,single-phase 3-wires,3-phase 3-wires 
Input resistance(50/60 Hz):[Voltage] 2 MΩ, 
[Current] 1 mΩ or less (direct input) 
Basic accuracy(Active power):±0.1% rdg. ±0.1% f.s. (DC)
Display refresh rate:5 times/s to 20 seconds 
For more details refer datasheet.

Product Overview

3-Channel AC/DC Power Meter for Single-Phase to 3P4W 
Equipment such as Motors, Inverters, Power Conditioners
Measurement range:[Voltage] 0.15 V to 1000 V AC/DC
[Current]Direct input: 2 mA to 65 A AC/DC
Input resistance:(50/60 Hz):[Voltage] 2 MΩ, 
[Current] 1 mΩ or less (direct input)
Basic accuracy:±0.1% rdg. ±0.1% f.s. (DC)
±0.1% rdg. ±0.05% f.s.
For more details refer datasheet.

Product Overview

Power Loggers for Energy Audits and Energy Conservation
Voltage ranges:600 V AC 
Effective measurement range:90.00 V to 780.00 V
Current ranges:500.00mA to 5.0000kA AC
Power ranges:300.00 W to 9.0000 MW 
Basic accuracy:Voltage: ±0.3% rdg. ±0.1% f.s
Current: ±0.3% rdg. ±0.1% f.s. + clamp sensor accuracy
Display update rate:0.5 sec
For more details refer datasheet.

Product Overview

Eliminate the Risk of Short-Circuits and Electrical Accidents
Voltage ranges:400 V AC 
Harmonic:    
Harmonic voltage, harmonic current, 
voltage total harmonic distortion (THD-F or THD-R), 
current total harmonic distortion (THD-F or TDH-R),
Current ranges:500.00 mA to 5.0000 kA AC
Power ranges:200.00 W to 6.0000 MW 
For more details refer datasheet.

Product Overview

DC, 0.5 Hz to 200 kHz, 3-phase 4-wire, 
High Precision Power Analyzer for 
Motor and Inverter Efficiency Analysis
Harmonic measurement    
Input:4 ch,Synchronization frequency:0.5Hz to 5kHz,
Frequency band:DC,0.5Hz to 200kHz
Data update rate:50 ms 
Display refresh rate:200ms
For more details refer datasheet.

Product Overview

DC, 0.5 Hz to 200 kHz, 3-phase 4-wire, 
High Precision Power Analyzer for 
Motor and Inverter Efficiency Analysis
Measurement range:    
Voltage range: 6 to 1500 V, 8 ranges
Current range: 400 mA to 1 kA 
Current range: 100 mA to 50 kA 
Power range:2.40000W to 4.50000MW 
Frequency range: 0.1 Hz to 2 MHz
For more details refer datasheet.

Product Overview

DC, 0.5 Hz to 200 kHz, 3-phase 4-wire, 
High Precision Power Analyzer for 
Motor and Inverter Efficiency Analysis
Data update rate:1ms,10ms,50ms,200ms
Measurement range
Voltage: 6V to 1500V
Current: 40 mA to 2kA,(Probe2)100mA to 50kA
Power supply:100V to 240V AC,50/60Hz,230 VA
For more details refer datasheet.

Product Overview

MECO Model PHA-5850 can Analyze, Measure, Monitor
& Data Log values of Power Quality & Consumption  
Analysis of 3P4W,3P3W,1P2W,1P3W Systems
Display of 35 Parameters in one screen (3P4W)
Programmable CT (1 to 600) and PT (1 to 3000) Ratios
RMS, PEAK Value & Crest Factor
True RMS value,Active Power,Apparent 
Power Factor, Phase Angle ( ? )
Analysis of total Harmonics Destortion (THD-F)
Capture 28 Transient Events with Programmable 
Built in timer & Calender for Data Logging
For more details refer datasheet.

Product Overview

RISH PQM is a compact,multi-function panel mount 
power quality monitor, which measures, 
calculates and displays major electrical parameters
of three phase power system like Voltage, Current, 
Active / Fundamental Reactive / Apparent Power and Energy, 
Individual Harmonics, Sags and Swells.
Measures & Monitors more than 80 parameters
Power Quality Measurement
Graphical Analysis
Energy class 0.5S as per IEC 62053
Onsite programmable for user desired application
Time Of DAY (TOD / TOU)
For more details please refer datasheet.

Product Overview

RiSH PQA is a compact power quality analyzer 
that measures basic electrical parameters like 
voltage, current, power, demand and energy. 
It's designed for utilities, as well as 
for industrial and commercial customers.
RiSH PQA measurement as per EN50160
Voltage Swell & Dip Detection.
Voltage Variation Detection.
Detection of Voltage Interruptions.
Unbalance Detection & Measurements.
Frequency Variation Measurement.
For more details please refer datasheet.

Product Overview

The Rish Flex 28012A is a 1-Phase power supply
from Rishabh Instruments. 
It has following features:
Input: 115 – 230 Vac
Output: 12 Vdc 60°C
Efficiency up to 91%
Strong overload without switch-off, 
upto50%Flexible Power continuity : 
from240to336W“Power Good” Relay
DIN Rail Mountable
Extremely small size
For more details please refer datasheet.

Product Overview

Intizon Mini UPS for Wi-Fi Router is a reliable 
and efficient power backup solution designed to 
provide uninterrupted power backup for Wi-Fi routers, 
ensuring you live full on with uninterrupted 
internet connectivity. This battery backup UPS 
for Wi-Fi routers is compatible with all 
Upto 4 hours of backup time 
Premium aesthetics & compact 
LED indicator
Standard IO socket for seamless connectivity 
Instant and smooth transition to backup power 
For more details please refer datasheet.

Product Overview

Valura is a double-conversion online UPS 
that comes with inbuilt batteries of 9AH. 
It is a dependable power backup solution 
with an input power factor of  >0.99,<10% 
THDi, upto 97% energy efficiency in ECO mode. 
n-built batteries with Plug N Play installation
DSP Controller for high performance
Intuitive LCD Display
Flame retardant cabinet for added protection.
Generator compatible
Solar compatible
ECO mode
Auto restart facility
Battery mode start-up                                          
For more details please refer datasheet.

Product Overview

The Digital 600 EX V Double has a 
microprocessor-based design that offers 
double backup time during outages and 
stabilizes the voltage.
Generator Compatibility
Battery Mode Start-Up
No Load Protection
In-Built Battery ,Double Boost & Single Buck
AVR
Auto Restart Facility
Overload and Short Circuit Protection
UL Standard Flame Retardant Cabinet
BIS Registered                           
For more details please refer datasheet.
 

Product Overview

Line Interactive  Digital 2000 HR-V IBB UPS 
that comes with in-built batteries of 28 AH. 
It provides reliable power backup to 
high-performance electronic gadgets like, 
gaming PCs and consoles, network accessories,
POS devices, security surveillance systems, 
and other such devices. It ensures uninterrupted 
power backup for an extended duration and 
safeguards connected devices against 
certain surges and spikes.
Plug N Play for easy installation
In-Built battery for convenience
Extended battery run-time
Cold start capability for continuous operations
For more details please refer datasheet.

Product Overview

Digital 1000 HR-V IBB is a Line Interactive UPS 
thats comes with an in-built battery of 
28AH and 42 AH that maximizes and extends
battery performance. Ideal for providing
uninterrupted power backup to computer systems, 
routers, external storage devices, gaming consoles, 
and other home & business electronic products.
In-Built battery
Built-in Automatic Voltage Regulator (AVR)
Microprocessor control
Extended battery run-time
Cold start capability
Generator compatibility
Smart battery management
LCD/LED display
Auto restart facility
For more details please refer datasheet.

Product Overview

The Digital 1000 Plus V ensures productivity 
and efficiency in harsh power environments 
for hard working electronic equipment.
Generator compatibility
Battery mode start-up
No-load protection
Inbuilt battery
Quick charging
Auto restart facility
Range: 1000 VA
Input Voltage Range: 140 - 300 V
Input Frequency    50 Hz
Output Voltage    230 V
UL standard flame-retardant cabinet
For more details please refer datasheet.
For more details please refer datasheet.

Product Overview

The Digital 600 EX has a microprocessor-based design 
for high reliability and accuracy. 
Its fan-less design and high frequency 
components ensure silent operations.
Generator compatibility
Battery mode start-up
No-load protection
Inbuilt battery
Quick charging
Auto restart facility
UL standard flame retardant cabinet
BIS compliant
For more details please refer datasheet.

Product Overview

Onfiniti is available in the 1 to 10 kVA range. 
It offers true double conversion online power 
protection for critical industry loads. 
Onfiniti UPS is also solar compatible. 
It is suited for workstations, ATMs, 
cash recyclers, POS, security surveillance equipment, 
network accessories and medical diagnostic equipment.
Temperature compensated charger
ECO mode
Fan speed control
Isolation transformer
Generator compatibility
CE & RoHS certified                                        
For more details please refer datasheet.

Product Overview

Digital 1000 HR V comes with a long backup charger 
that allows connecting higher capacity batteries. 
uninterrupted power backup for extended duration
Generator Compatibility
Battery Mode Startup
LCD Display Double Boost & Single Buck AVR
Long Backup Charger Overload and 
Short Circuit Protection
Auto Restart Facility
UL Standard Flame Retardant Cabinet
BIS Registere                     
For more details please refer datasheet.

Product Overview

Digital 2000 HR V is suitable for protecting 
high performance electronic gadgets like gaming PCs, 
network accessories,security surveillance systems. 
It ensures uninterrupted power backup for 
an extended duration and guarantees protection 
against surges and spikes.
Generator Compatibility
Battery Mode Startup
Led Indication Double Boost & Single Buck AVR
Long Backup Charger
Auto Restart Facility Overload,short circuit
UL Standard Flame Retardant Cabinet
For more details please refer datasheet.

Product Overview

Valura is a online single-phase UPS. 
It is a dependable power backup solution
with power factor of  >0.99, <10% THDi, 
Constant Current & Voltage Charger. 
Valura single-phase UPS comes with DSP 
controlled integrated circuit for a fast 
dynamic response for nonlinear loads and 
high-power factor under loading conditions.
Intuitive LCD Display
Flame retardant cabinet for added protection
Generator compatible
Solar compatible                                  
For more details please refer datasheet.

Product Overview

True double-conversion online single-phase UPS 
that comes with inbuilt batteries of 9AH. 
It is a dependable power backup solution 
with an input power factor of  >0.99,<10% THDi, 
upto 97% energy efficiency in ECO mode. 
Valura single-phase UPS comes with DSP 
controlled integrated circuit for a fast 
dynamic response for nonlinear loads and 
high-power factor under loading conditions. 
Intuitive LCD Display
Generator compatible
Auto restart facility
Battery mode start-up
Flame retardant cabinet for added protection.                                          
For more details please refer datasheet.
 

Product Overview

Premius is a high efficiency single phase UPS 
that delivers unity power factor across its entire range. 
With up to 94% efficiency, N+X redundancy configuration 
Premius is best suited for critical applications 
across various segments. Premius operates in a wide 
input voltage window, providing constant output 
voltage for demanding applications.
Unity power factor delivers upto 25% more active power
High efficiency of upto 94% for lower operating cost  
<5% THDi improves UPS operating capacity
N+X redundancy for maximum uptime  
Parallelable upto 4 UPS
High capacity charger for quick battery recharge  
Inbuilt isolation transformer for reliable protection
Programmable output socket for critical loads
Wide communication option                                          
For more details please refer datasheet.

Product Overview

Daker DK PLUS UPS is a true high-density 
single phase rack tower UPS with a rotatable display. 
It is available in the 1-10 kVA range and offers 
unity power factor from 5 - 10 kVA with an efficiency 
of up to 94%. The integrated communication software 
not only controls the UPS but switches off 
in the event of a malfunction. 
UPS Internal Temperature Notification
Programmable Output Sockets
98% Efficiency in ECO Mode
Emergency Power Off
Silent Operation
IP 21 Protectio                                  
For more details please refer datasheet.

Product Overview

The HPi 33 EVO is an evolution that offers 
high performance, great flexibility, 
ease of use and optimal protection for 
uninterrupted business continuity. 
HPi 33 EVO is an online double conversion 
UPS system that offers unity power factor 
for maximum power availability, 
reliability, and high efficiency.
Unity power factor to offer maximum active power
Upto 95% efficiency resulting in lower operating costs
Ease of use with 5-Inch intuitive touch screen display
Advance battery management for intermittent charging 
Temperature-compensated battery charger 
Conformal coated boards for environmental protection
Equipped with Dust Filter for added protection                      
For more details please refer datasheet.
 

Product Overview

Keor HPE is a Three Phase online double conversion UPS 
with 3-Level IGBT technology, PWM high frequency and 
with the possibility to be connected in parallel 
to have N+X redundancy of up to 6 units in total. 
The rated power delivery is 60 - 500 kW. 
The batteries are lead acid sealed maintenance-free 
and valve regulated in an external cabinet. 
IGBT Based Rectifier
Compact Foot Print
Rectifier Walk-In & Delay Start
Input Phase Auto Correction
High efficiency upto 96.5%    
Unity power factor
Inbuilt batteries/Isolation transformer optional                   
For more details please refer datasheet.

Product Overview

Keor T EVO is an evolution of the successful  Keor T 
range of UPS, that represents our philosophy of 
continuous innovation to address the 
changing needs of our customers.  
Keor T EVO comes with 3-Level IGBT technology 
and high-level efficiency that offers 
a drastic reduction in TCO. 
The rated power delivery is 15-20-30-40-60 kVA. 
Keor T EVO with inbuilt batteries upto 15 minutes
of backup time or with inbuilt isolation 
transformer reduces the floor space thus 
saving significant infrastructure cost. 
IGBT Based Rectifier
Unity PF Design
Touch Screen Display
Compact Foot Print                
For more details please refer datasheet.

Product Overview

KEOR HP is VFI Three Phase online double 
conversion UPS from 100 to 800 kVA. 
It has PWM high frequency with the option of 
connectivity in parallel to have N+X redundancy 
of up to 6 units in total. The rated power delivery 
is 100-125-160-200-250-300-400-600-800 kVA. 
They are designed with built-in 
inverter isolation transformer. 
This reliable and rugged UPS range supports 
the most critical loads which makes it suitable 
for commercial, data centre, manufacturing, 
health care and infrastructure needs.
Compact Footprint
Input Auto Phase Correction
Rectifier Walk-in & Delay Start
Back Feed Detection Circuit
Temperature Compensated Battery Charging
Power Parallel up to 4.8 MW
For more details please refer datasheet.

Product Overview

Keor XPE is a modular high-power UPS system. 
Based on its 250 kW or 300 kW power units, 
it can provide maximum nominal power of 2.1 MW. 
Its 3-level Inverter technology delivers up 
to 97% online efficiency which significantly 
helps reduce power loss and ensures less 
stress on each component. Its sustainable 
design not only offers considerable energy 
saving, but also has high recyclable rate. 
For more details please refer datasheet.
 

Product Overview

Keor MOD is a Three Phase UPS with a scalable modular 
architecture that provides N+X redundancy. 
Each unit can be connected in parallel to identical 
or different units upto 600 kW. The 10” touch 
screen display that can rotate inwards by 180° 
is equipped with interactive icons to 
provide a simplified control panel. 
Keor MOD features complete front electrical 
access and wide selection of communication 
interfaces for enhanced UPS management. 
Keor MOD is the ideal solution for small 
and medium data centers and other 
critical high-computing applications.
Just two cabinet configurations (125 kW & 250 kW)
Parallelable upto 600 kW
Internal battery backup option in 125 KW
Rotating 10" touch screen display
For more details please refer datasheet.

Product Overview

Trimod HE is a VFI Three Phase online double conversion UPS 
with PWM High-Frequency technology, modular architecture 
with the possibility to have N+X redundancy. 
It has a reduced footprint in the 10 to 80 kW range. 
Trimod HE is made of individual single phase modules 
which are redundant and self-configuring. 
They deliver a rated power from 10 – 80kW. 
Batteries are lead acid, sealed, maintenance- free, 
valve regulated and arranged inside the UPS as 
battery modules or in an external battery cabinet.
Granular Parallel Architecture
Separate Bypass
Compact Foot Print
3 Stage Charging
Multi Color LCD Display
Module Capacity - 3.4 kVA
For more details please refer datasheet.
 

Product Overview

Numeric Voltsafe PLUS air-cooled 1 Ph servo stabilizers 
are designed to ensure a stable and constant voltage 
and prevent fluctuations for a wide range of 
electrical and electronic equipment. 
Engineered with advanced MCU and in-built SMPS technology,
it ensures uninterrupted operational performance. 
These single-phase servo stabilizers are ideal for 
protecting medical equipment, home appliances, 
fitness equipment, IT peripherals, critical desktop 
publishing equipment, and managing lighting loads.  
Seven-segment display for ease of use 
>97% efficiency for increased energy savings 
Enhanced safety with visual LED indicators 
High MTBF with minimal maintenance 
Extended life
Generator compatib
For more details please refer datasheet.

Product Overview

Numeric Voltsafe PLUS air-cooled 3 Ph servo stabilizers 
offer robust protection against overload, short circuits, 
phase corrections, and voltage fluctuations for a wide 
range of electrical and electronic equipment. 
Engineered with advanced MCU and integrated SMPS technology,
they ensure continuous operational performance. 
The true RMS sensing capabilities enables precise voltage 
regulation even in adverse waveform conditions. 
Advanced Microcontroller technology for efficient operations
High MTBF with low maintenance for minimum downtime
More than 97% efficiency for energy savings
High reliability for consistent power delivery
No waveform distortion for protection against damages
Audible buzzer warning for fault detection
Generator compatible
For more details please refer datasheet.

Product Overview

Numeric Voltsafe PLUS oil-cooled 3 Ph servo stabilizers 
offer robust protection against overload, short circuits, 
phase corrections, and voltage fluctuations for a wide range 
of electrical and electronic equipment. 
Engineered with advanced MCU and integrated SMPS technology, 
they ensure continuous operational performance. 
The true RMS sensing capabilities enable precise 
voltage regulation even in adverse waveform conditions.
Oil Cooled for efficient heat dissipation 
More than 97% efficiency for energy savings
High reliability for consistent power delivery
Pressed steel radiator fin for efficient cooling
High MTBF with low maintenance for minimum downtime
For more details please refer datasheet.

Product Overview

30V/1A Single Output DC Power Supply
Constant Voltage/Current digital DC 
power supply with dual LCD
Line Current Regulation:<0.2% + 3mA
Line Voltage Regulation:<0.01% + 3mV
Load Current Regulation:<0.2% + 3mA
Load Voltage Regulation:<0.01% + 2mV
Output Current:0 - 1.00A DC
Output Current Basic Accuracy:±2% of reading
Output Voltage:30.0V DC
Output Voltage Basic Accuracy:±1.5% of reading
For more details please refer datasheet.

Product Overview

The Extech 382202 is a DC Power Supply 
which provides an adjustable 0V to 30V 
and 0 A to 1 A output. 
It features a dual backlit LCD display for
current and voltage as well as short circuit 
and overload protection. 
Operates from 120 VAC ± 10%/60 Hz power source. 
Banana plug outputs. Complete with power cord.
Line Current Regulation :<0.2% + 3mA
Line Voltage Regulation: <0.01% + 3mV
Load Current Regulation: <0.2% + 3mA
For more details please refer datasheet.

Product Overview

Ideal for a wide range of applications including 
bench testing,field service,hobby, and telecommunication 
equipment,the solid state,compact Extech 382213 
Digital Triple Output DC Power Supply delivers clean, 
reliable power while protecting itself and 
any device under test (DUT) from damage. 
Featuring a digital LCD display, the 382213 also 
includes overload and short circuit protection, 
constant voltage/current, easy snap terminals 
for 5 and 12 Volt outputs, and a current-limited 
front panel LED indicator. 
For more details please refer datasheet.
 

Product Overview

382270 is a Quad Output DC Power Supply 
has two 0 to 30V/0 to 5A outputs plus two 
fixed auxiliary outputs of 3 to 6.5V/3Aand 15V/1A. 
The two 30V outputs can be combined in parallel 
for 10A or in series for 60V. 
Comes complete with 4 pairs of test leads 
(banana plug to alligator clip) and an AC cord.
Line Current Regulation :2mA ±3mA
Line Voltage Regulation :0.1mV ±3mV
Load Current Regulation:2mA ±5mA
Load Voltage Regulation :0.5mV ±3mV
For more details please refer datasheet.

Product Overview

The Extech 382275 power supply is an easy-to-configure, 
highly stable, lab grade DC power supply with maximum 
output power of 600 Watts. 
The new DC power supply offers two degrees of control 
over both current and voltage outputs (course and fine). 
Output is adjustable from 0 to 30 Volts DC and 0 to 20 Amps 
with (0.1 Volts/Amps resolution). 
Dual green LED displays offer easy-to-read, high 
contrast readouts of voltage and current values.
For more details please refer datasheet.

Product Overview

382276 is a Switching Mode DC Power Supply 
has an adjustable output of 0 to 30V/ 20A 
with two user-defined presets 
and one 13.8V/20A factory preset. 
Power supply features dual LED displays, 
high RFI immunity, excellent EMI, and 
a Thermostatic Control Fan.
Additional features include over-voltage, 
over-temperature, and short circuit protection. 
Operates at 220V, 50/60Hz and comes 
complete with AC power cord.
For more details please refer datasheet.
 

Product Overview

Extech’s DCP36 power supply has 80W 
constant power topology and has autoranging 
Voltage and Current output. 
This compact and lightweight unit provides 
easy portability, and is ideal for tight 
workbenches with limited space. 
It features 4-Digit LED displays, 3-programmable 
presets, front/rear output terminals, and remote 
sensing for accurate applied voltage at load point.
Line Current Regulation :≤10mA
Line Voltage Regulation :≤4mV
For more details please refer datasheet.

Product Overview

The Extech DCP42 is a 160 W Switching Power Supply. 
The single-output, continuous power supply with USB 
offers high efficiency electrical power conversion
for greater energy conservation and lighter weight. 
Complete with power cord, software, and USB cable.
Software includes DC ramp and waveform generator.
Line Current Regulation: ≤0.1% (90-264V AC)
Line Voltage Regulation:≤0.02% (90-264V AC)
Load Current Regulation :≤0.5% (10-90% rated voltage)
Load Voltage Regulation :≤0.15% (10-100% rated current)
Output Current:0 to 10A
For more details please refer datasheet.

Product Overview

The Extech 382100 is a 3-Phase Power Analyzer
And Datalogger that saves data (up to 30,000 
sets of measurements) on an SD card in Excel 
format for easy transfer to your PC. 
It provides a full system analysis with up to 
35 parameters including: V (phase-to-phase), 
V (phase-to-ground), A (phase-to-ground), 
KW/KVA/KVAR/PF(phase),KW/KVA / KVAR / PF (system), 
KWH / KVAH / KVARH / PFH (system), and Phase Angle. 
Readings are displayed on a large, dot matrix, 
sun-readable, backlit LCD. 
For more details please refer datasheet.

Product Overview

The Extech DL150 is a True RMS 
AC Voltage and Current Data Logger. 
Data log up to 100,000 readings of TRMS 
AC Voltage (600 Volt) or Current (200 Amp) with 
a user programmable sample rate from 
1 second to 24 hours. 
LCD displays time/date, current reading, 
min/max,and if the user settable high/low 
alarms have been exceeded. 
Readings can be downloaded to your PC 
via the USB interface.  
For more details please refer datasheet.

Product Overview

The DL160 is a Dual Input True RMS 
AC Voltage/Current Data logger. 
Simultaneously data log 2 channels of 
up to 256,000 readings of TRMS AC Voltage (600V)
or Current (200A) or one AC Voltage and one
AC Current input with a user programmable 
sample rate from 1 second to 24 hours. 
LCD displays time/date, current reading, and min/max.
Featuring Normal, Peak, and Capture (user specified
trigger level) recording modes.
Complete with 2 current clamps, two sets of test leads,
2 sets of alligator clips, software, USB cable. 

Product Overview

With the Extech PM120 Power Monitor and record
power usage of home and work appliances for energy
conservation and cost reduction analysis with. 
This helps you determine if the electrical device 
should be replaced with a higher efficiency unit. 
The PM120 has a large dual LCD. 
The primary display shows voltage, current, power, 
power factor, and frequency readings. 
Design includes a standard, North American 
3 prong plug, front socket connection, 
and backup battery that saves customized programs.
For more details please refer datasheet.

Product Overview

The PQ2071 is a 1-/3-Phase 1000 Amp 
True RMS AC Power Clamp Meter. 
Extech's multifunctional PQ2071 Power Clamp meter 
operates as a True RMS Clamp Meter, Power Meter,
Multimeter, and AC Voltage Detector. 
Featuring a CAT IV-600 Volt safety rating, 
the PQ2071 measures AC Current,Voltage,Frequency 
and Power including True Power, Apparent Power,
Reactive Power and Active Power. 
Measures 1-Phase and balanced 3-Phase True Power (kW),
Apparent Power(kVA),Reactive Power(kVAR) and Active Power(kWh),
plus Power Factor and Phase Angle. 
For more details please refer datasheet.

Product Overview

The Extech PQ3350 is a 3-Phase Power Analyzer
and Harmonics Analyzer made for single 
and 3-phase/3-wire or 3-phase/4-wire systems.
The large, backlighting LCD displays up to
35 parameters in one screen.
With the PQ3350, data log up to 52,428
single phase readings or 17,476 3-phase readings, 
and simultaniously display total harmonic 
distortion (THD-F) and waveform with 
peak values (1024 samples/period). 
Includes 4 voltage leads with alligator clips
and retractable plunger clips, 8 AA batteries,universal 
AC adaptor, software, USB interface cable, and case.
For more details please refer datasheet.
 

Product Overview

The Extech PQ3350-1 is a 3-Phase Power & Harmonics Analyzer
capable of up to 52,428 single phase readings 
or 17,476 3-phase readings.
It includes a large backlighting LCD displays 
up to 35 parameters in one screen, and allows 
for the simultanious display of harmonics and waveform. 
For single and 3-phase/3-wire or 3-phase/4-wire systems. 
Complete with 3 flexible current clamps,
4 voltage leads with alligator clips and retractable 
plunger clips, 8 AA batteries, universal AC adaptor, 
software, USB interface cable, and case.
For more details please refer datasheet.

Product Overview

The Extech PQ3450 is a 3-phase power analyzer/data
logger capable of logging up to 30,000 sets of measurements
in Excel® format on a removable SD memory card. 
The product is easy-to-hold with a rugged over molded housing. 
It features a built-in clock and calendar, 35 parameters, 
and a CAT III 600V safety rating. 
Complete with a year warranty, 4 voltage leads with 
alligator clips, 8 AA batteries, SD card, 
100-240 Volt AC adaptor and case. 
Clamp probes sold separately.
Active Power Basic Accuracy: ±(1.0% of reading)
Active Power Energy: 0.0kWh to 9.999MWH
For more details please refer datasheet.

Product Overview

"VARIVOLT" AUTO TRANSFORMER is a continuously 
variable voltage auto transformer, 
having a movable carbon tip, 
fixed to brush arm sliding on a silver 
plated commutator.
"VARIVOLT" Auto transformers are designed
for heavy duty trouble free operation. 
Rotation of the brush arm by either manual 
or motor drive, delivers an output voltage 
from zero to or above line voltage.
"VARIVOLT" conforms to I.S. 5142
For more details please refer datasheet.
 

Product Overview

"VARIVOLT" AUTO TRANSFORMER is a continuously 
variable voltage auto transformer, 
having a movable carbon tip, 
fixed to brush arm sliding on a silver 
plated commutator.
"VARIVOLT" Auto transformers are designed
for heavy duty trouble free operation. 
Rotation of the brush arm by either manual 
or motor drive, delivers an output voltage 
from zero to or above line voltage.
"VARIVOLT" conforms to I.S. 5142
For more details please refer datasheet.

Product Overview

"VARIVOLT" AUTO TRANSFORMER is a continuously 
variable voltage auto transformer, 
having a movable carbon tip, 
fixed to brush arm sliding on a silver 
plated commutator.
"VARIVOLT" Auto transformers are designed
for heavy duty trouble free operation. 
Rotation of the brush arm by either manual 
or motor drive, delivers an output voltage 
from zero to or above line voltage.
"VARIVOLT" conforms to I.S. 5142
For more details please refer datasheet.

Product Overview

"VARIVOLT" AUTO TRANSFORMER is a continuously 
variable voltage auto transformer, 
having a movable carbon tip, 
fixed to brush arm sliding on a silver 
plated commutator.
"VARIVOLT" Auto transformers are designed
for heavy duty trouble free operation. 
Rotation of the brush arm by either manual 
or motor drive, delivers an output voltage 
from zero to or above line voltage.
"VARIVOLT" conforms to I.S. 5142
For more details please refer datasheet.

Product Overview

"VARIVOLT" AUTO TRANSFORMER is a continuously 
variable voltage auto transformer, 
having a movable carbon tip, 
fixed to brush arm sliding on a silver 
plated commutator.
"VARIVOLT" Auto transformers are designed
for heavy duty trouble free operation. 
Rotation of the brush arm by either manual 
or motor drive, delivers an output voltage 
from zero to or above line voltage.
"VARIVOLT" conforms to I.S. 5142
For more details please refer datasheet.

Product Overview

"VARIVOLT" AUTO TRANSFORMER is a continuously 
variable voltage auto transformer, 
having a movable carbon tip, 
fixed to brush arm sliding on a silver 
plated commutator.
Excellent Regulation: The drop in voltage from 
"no load to full load" is minimal in "VARIVOLT"
Auto-transformers.
High Efficiency: Careful copper, core selection
and design assures the user of low watt loss, 
as compared to other controllers.
For more details please refer datasheet.

Product Overview

"VARIVOLT" AUTO TRANSFORMER is a continuously 
variable voltage auto transformer, 
having a movable carbon tip, 
fixed to brush arm sliding on a silver 
plated commutator.
Excellent Regulation: The drop in voltage from 
"no load to full load" is minimal in "VARIVOLT"
Auto-transformers.
High Efficiency: Careful copper, core selection
and design assures the user of low watt loss, 
as compared to other controllers.
For more details please refer datasheet.

Product Overview

"VARIVOLT" has been carefully designed. 
No special care has to be taken to maintain "VARIVOLT"
auto transformers in normal working environments. 
Timely replacement of carbon tips and cleaning off
foreign particles and accumulated dust, from the 
commutators surface, will ensure a considerably long, 
maintenance free, and uninterrupted life to the unit. 
Normally "VARIVOLT" auto transformers up to 28 Amps
Excellent Regulation: The drop in voltage from 
"no load to full load" is minimal in "VARIVOLT"
Auto-transformers.
For more details please refer datasheet.

Product Overview

"VARIVOLT" has been carefully designed. 
No special care has to be taken to maintain "VARIVOLT"
auto transformers in normal working environments. 
Timely replacement of carbon tips and cleaning off
foreign particles and accumulated dust, from the 
commutators surface, will ensure a considerably long, 
maintenance free, and uninterrupted life to the unit. 
Normally "VARIVOLT" auto transformers up to 28 Amps
Excellent Regulation: The drop in voltage from 
"no load to full load" is minimal in "VARIVOLT"
Auto-transformers.
For more details please refer datasheet.

Product Overview

"VARIVOLT" has been carefully designed. 
No special care has to be taken to maintain "VARIVOLT"
auto transformers in normal working environments. 
Timely replacement of carbon tips and cleaning off
foreign particles and accumulated dust, from the 
commutators surface, will ensure a considerably long, 
maintenance free, and uninterrupted life to the unit. 
Normally "VARIVOLT" auto transformers up to 28 Amps
Excellent Regulation: The drop in voltage from 
"no load to full load" is minimal in "VARIVOLT"
Auto-transformers.
For more details please refer datasheet.

Product Overview

"VARIVOLT" has been carefully designed. 
No special care has to be taken to maintain "VARIVOLT"
auto transformers in normal working environments. 
Timely replacement of carbon tips and cleaning off
foreign particles and accumulated dust, from the 
commutators surface, will ensure a considerably long, 
maintenance free, and uninterrupted life to the unit. 
Normally "VARIVOLT" auto transformers up to 28 Amps
Excellent Regulation: The drop in voltage from 
"no load to full load" is minimal in "VARIVOLT"
Auto-transformers.
For more details please refer datasheet.

Product Overview

The highly fluctuating A.C. Mains supply is a very 
common phenomenon in India and the difficulties caused by
them are known too well and need not be enumerated. 
The emergence of the sophisticated computer era has 
created the need for a stable input supply as a basic necessity. 
The absence of stable supply creates problems in many equipments.
Unsteady voltage supply conditions result in the total breakdown 
of sensitive and sophisticated equipments. 
STEADYVOLT conforms to I.S. 9815
For more details please refer datasheet.

Product Overview

The highly fluctuating A.C. Mains supply is a very 
common phenomenon in India and the difficulties caused
by them are known too well and need not be enumerated.
The emergence of sophisticated computer era has created 
the need for a stable input supply as a basic necessity.
The absence of this stable supply creates problems in
many equipments. 
The hope of getting a stable supply is very remote 
in our country and keeping this in view, 
VOLTAMP CONTROLS have developed the "STEADYVOLT"
Servo Controlled Voltage Stabilizers. 
For more details please refer datasheet.

Product Overview

JINDAL'S AVC not only stabilizes incoming voltage 
fluctuations, but in the process also helps save 
energy upto 30% and reduce breakdowns upto 80%. 
Owing to its high efficiency and associated benefits,
the pay-back period for the cost of our AVC is 
typically between 6 to 18 months, depending upon 
the nature and duration of load and the extent of
voltage variation. 
And more often than not, it is simply avoiding 
a few hours of machine downtime or just one 
failure to recover the cost of the equipment.
For more details please refer datasheet.

Product Overview

JINDAL'S AVC not only stabilizes incoming voltage 
fluctuations, but in the process also helps save 
energy upto 30% and reduce breakdowns upto 80%. 
Technology: Linear type on-load voltage regulators
No. of phases: Three, 
Frequency: 50 Hz
Type: BALANCED: (Common phase control)
Duty cycle: 100% continues, 
Response time: <10 ms
Cooling: Natural oil cooled Indoor type
Control module: Microprocessor based
Output voltage: 400 V (Ph-Ph)/ 230 V (Ph-N)
For more details please refer datasheet.

Product Overview

JINDAL'S Silicon Power Rectifiers are trusted 
for their energy efficient and long life for 
numerous electrochemical applications across 
the world.
JINDAL'S Rectifiers are designed for 3 phase,
50 Hz, 400 Volts,AC input supply. 
It is recommended that the input of the rectifier
should be connected through a proper protective 
device, to provide positive protection to personnel
and the system, in the event of maintenance or in
case a fault occurs.
For more details please refer datasheet.

Product Overview

DC Regulated Power Supply (Single Output)
ME 230 (0-30V/2A), ME 231 (0-30V/5A)
High accuracy, high stability
Over load & short circuit protection
Allow full scale long time operation
Voltage and current continuously variable 
within nominal value
Output Voltage Fixed 5V/3.3V
Output Current 1A
Source Regulation <5mV
Load Regulation <15mV
For more details please refer datasheet.

Product Overview

DC Regulated Power Supply (Dual Output)
ME 240 (0-+30V/2A), ME 241 (0-+30V/5A)
High accuracy, high stability
Over load & short circuit protection
Allow full scale long time operation
Voltage and current continuously variable
within nominal value
CC/CV indication
Dual Output Voltage 0-+30V
Dual Output Current 0-2A(ME 240) / 0-5A(ME 241)
Fixed Output 5V/2A
For more details please refer datasheet.

Product Overview

Multiple DC Regulated Power Supply
Short circuit & overload protected
High accuracy, high stability
Allow full scale long time operation
Voltage and current continuously variable 
within nominal value.
Source Regulation <0.05%
Load Regulation <0.05%
Ripple & Noise <1mV (rms)
Recovery time <50ms
Accuracy +1%, +1 Digit
For more details please refer datasheet.

Product Overview

High resolution programmable electronic load
Menu operation by front keypad and rotary switch
Large LCD display with backlit both current
/voltage/power values
Constant current and constant power mode
Over current or power protection
Memory: Store & recall setup data for different
applications
Series/parallel connections
Interface to computer
Safety design
For more details please refer datasheet.