Product Overview

3-Phase 4-Wire Power Quality Analyzer 
Compliant to IEC61000-4-30 Class S Standards  
On-screen Guide to Deliver Easy Setup and Testing
Voltage ranges:1000.0 V rms or DC, 
Transient measurement 2.200 kV peak
Current ranges:50.000 mA AC to 5.0000 kA AC,
10.000 A DC to 2.0000 kA DC
Power ranges:50.000 W to 6.0000 MW
For more details refer datasheet.

Product Overview

Investigate Power Characteristics,
Analyze the Causes of Problems 
Voltage ranges:600.00 V rms
Transient measurement 6.0000 kV peak
Current ranges:500.00 mA to 5.0000 kA AC
Power ranges:300.00 W to 3.0000 MW
Basic accuracy:Voltage: ±0.1% of nominal voltage
Current: ±0.1 % rdg. ±0.1 % f.s.
Active power: ±0.2 % rdg. ±0.1 % f.s.
For more details refer datasheet.

Product Overview

Measure AC/DC Standby Power Up to Large Power Loads
Measurement lines:Single-phase/two-wires
Measurement items:Voltage, current, active power, 
apparent power, reactive power, power factor, 
phase angle, frequency, maximum current ratio, 
current integration, active power integration, 
integration time,voltage waveform peak value, 
current waveform peak value, voltage crest factor, 
current crest factor, time average current, 
For more details refer datasheet.

Product Overview

2-Channel AC/DC Power Meter for Single-Phase to 3P3W 
Equipment such as Motors,Inverters,Power Conditioners
Measurement lines:
Single-phase 2-wires,single-phase 3-wires,3-phase 3-wires 
Input resistance(50/60 Hz):[Voltage] 2 MΩ, 
[Current] 1 mΩ or less (direct input) 
Basic accuracy(Active power):±0.1% rdg. ±0.1% f.s. (DC)
Display refresh rate:5 times/s to 20 seconds 
For more details refer datasheet.

Product Overview

3-Channel AC/DC Power Meter for Single-Phase to 3P4W 
Equipment such as Motors, Inverters, Power Conditioners
Measurement range:[Voltage] 0.15 V to 1000 V AC/DC
[Current]Direct input: 2 mA to 65 A AC/DC
Input resistance:(50/60 Hz):[Voltage] 2 MΩ, 
[Current] 1 mΩ or less (direct input)
Basic accuracy:±0.1% rdg. ±0.1% f.s. (DC)
±0.1% rdg. ±0.05% f.s.
For more details refer datasheet.

Product Overview

DC, 0.5 Hz to 200 kHz, 3-phase 4-wire, 
High Precision Power Analyzer for 
Motor and Inverter Efficiency Analysis
Harmonic measurement    
Input:4 ch,Synchronization frequency:0.5Hz to 5kHz,
Frequency band:DC,0.5Hz to 200kHz
Data update rate:50 ms 
Display refresh rate:200ms
For more details refer datasheet.

Product Overview

DC, 0.5 Hz to 200 kHz, 3-phase 4-wire, 
High Precision Power Analyzer for 
Motor and Inverter Efficiency Analysis
Measurement range:    
Voltage range: 6 to 1500 V, 8 ranges
Current range: 400 mA to 1 kA 
Current range: 100 mA to 50 kA 
Power range:2.40000W to 4.50000MW 
Frequency range: 0.1 Hz to 2 MHz
For more details refer datasheet.

Product Overview

DC, 0.5 Hz to 200 kHz, 3-phase 4-wire, 
High Precision Power Analyzer for 
Motor and Inverter Efficiency Analysis
Data update rate:1ms,10ms,50ms,200ms
Measurement range
Voltage: 6V to 1500V
Current: 40 mA to 2kA,(Probe2)100mA to 50kA
Power supply:100V to 240V AC,50/60Hz,230 VA
For more details refer datasheet.

Product Overview

MECO Model PHA-5850 can Analyze, Measure, Monitor
& Data Log values of Power Quality & Consumption  
Analysis of 3P4W,3P3W,1P2W,1P3W Systems
Display of 35 Parameters in one screen (3P4W)
Programmable CT (1 to 600) and PT (1 to 3000) Ratios
RMS, PEAK Value & Crest Factor
True RMS value,Active Power,Apparent 
Power Factor, Phase Angle ( ? )
Analysis of total Harmonics Destortion (THD-F)
Capture 28 Transient Events with Programmable 
Built in timer & Calender for Data Logging
For more details refer datasheet.

Product Overview

RISH PQM is a compact,multi-function panel mount 
power quality monitor, which measures, 
calculates and displays major electrical parameters
of three phase power system like Voltage, Current, 
Active / Fundamental Reactive / Apparent Power and Energy, 
Individual Harmonics, Sags and Swells.
Measures & Monitors more than 80 parameters
Power Quality Measurement
Graphical Analysis
Energy class 0.5S as per IEC 62053
Onsite programmable for user desired application
Time Of DAY (TOD / TOU)
For more details please refer datasheet.

Product Overview

RiSH PQA is a compact power quality analyzer 
that measures basic electrical parameters like 
voltage, current, power, demand and energy. 
It's designed for utilities, as well as 
for industrial and commercial customers.
RiSH PQA measurement as per EN50160
Voltage Swell & Dip Detection.
Voltage Variation Detection.
Detection of Voltage Interruptions.
Unbalance Detection & Measurements.
Frequency Variation Measurement.
For more details please refer datasheet.

Product Overview

With the Extech PM120 Power Monitor and record
power usage of home and work appliances for energy
conservation and cost reduction analysis with. 
This helps you determine if the electrical device 
should be replaced with a higher efficiency unit. 
The PM120 has a large dual LCD. 
The primary display shows voltage, current, power, 
power factor, and frequency readings. 
Design includes a standard, North American 
3 prong plug, front socket connection, 
and backup battery that saves customized programs.
For more details please refer datasheet.

Product Overview

The PQ2071 is a 1-/3-Phase 1000 Amp 
True RMS AC Power Clamp Meter. 
Extech's multifunctional PQ2071 Power Clamp meter 
operates as a True RMS Clamp Meter, Power Meter,
Multimeter, and AC Voltage Detector. 
Featuring a CAT IV-600 Volt safety rating, 
the PQ2071 measures AC Current,Voltage,Frequency 
and Power including True Power, Apparent Power,
Reactive Power and Active Power. 
Measures 1-Phase and balanced 3-Phase True Power (kW),
Apparent Power(kVA),Reactive Power(kVAR) and Active Power(kWh),
plus Power Factor and Phase Angle. 
For more details please refer datasheet.

Product Overview

The Extech PQ3350 is a 3-Phase Power Analyzer
and Harmonics Analyzer made for single 
and 3-phase/3-wire or 3-phase/4-wire systems.
The large, backlighting LCD displays up to
35 parameters in one screen.
With the PQ3350, data log up to 52,428
single phase readings or 17,476 3-phase readings, 
and simultaniously display total harmonic 
distortion (THD-F) and waveform with 
peak values (1024 samples/period). 
Includes 4 voltage leads with alligator clips
and retractable plunger clips, 8 AA batteries,universal 
AC adaptor, software, USB interface cable, and case.
For more details please refer datasheet.
 

Product Overview

The Extech PQ3350-1 is a 3-Phase Power & Harmonics Analyzer
capable of up to 52,428 single phase readings 
or 17,476 3-phase readings.
It includes a large backlighting LCD displays 
up to 35 parameters in one screen, and allows 
for the simultanious display of harmonics and waveform. 
For single and 3-phase/3-wire or 3-phase/4-wire systems. 
Complete with 3 flexible current clamps,
4 voltage leads with alligator clips and retractable 
plunger clips, 8 AA batteries, universal AC adaptor, 
software, USB interface cable, and case.
For more details please refer datasheet.

Product Overview

The Extech PQ3450 is a 3-phase power analyzer/data
logger capable of logging up to 30,000 sets of measurements
in Excel® format on a removable SD memory card. 
The product is easy-to-hold with a rugged over molded housing. 
It features a built-in clock and calendar, 35 parameters, 
and a CAT III 600V safety rating. 
Complete with a year warranty, 4 voltage leads with 
alligator clips, 8 AA batteries, SD card, 
100-240 Volt AC adaptor and case. 
Clamp probes sold separately.
Active Power Basic Accuracy: ±(1.0% of reading)
Active Power Energy: 0.0kWh to 9.999MWH
For more details please refer datasheet.