Product Overview

The Rish Flex 28012A is a 1-Phase power supply
from Rishabh Instruments. 
It has following features:
Input: 115 – 230 Vac
Output: 12 Vdc 60°C
Efficiency up to 91%
Strong overload without switch-off, 
upto50%Flexible Power continuity : 
from240to336W“Power Good” Relay
DIN Rail Mountable
Extremely small size
For more details please refer datasheet.

Product Overview

30V/1A Single Output DC Power Supply
Constant Voltage/Current digital DC 
power supply with dual LCD
Line Current Regulation:<0.2% + 3mA
Line Voltage Regulation:<0.01% + 3mV
Load Current Regulation:<0.2% + 3mA
Load Voltage Regulation:<0.01% + 2mV
Output Current:0 - 1.00A DC
Output Current Basic Accuracy:±2% of reading
Output Voltage:30.0V DC
Output Voltage Basic Accuracy:±1.5% of reading
For more details please refer datasheet.

Product Overview

The Extech 382202 is a DC Power Supply 
which provides an adjustable 0V to 30V 
and 0 A to 1 A output. 
It features a dual backlit LCD display for
current and voltage as well as short circuit 
and overload protection. 
Operates from 120 VAC ± 10%/60 Hz power source. 
Banana plug outputs. Complete with power cord.
Line Current Regulation :<0.2% + 3mA
Line Voltage Regulation: <0.01% + 3mV
Load Current Regulation: <0.2% + 3mA
For more details please refer datasheet.

Product Overview

Ideal for a wide range of applications including 
bench testing,field service,hobby, and telecommunication 
equipment,the solid state,compact Extech 382213 
Digital Triple Output DC Power Supply delivers clean, 
reliable power while protecting itself and 
any device under test (DUT) from damage. 
Featuring a digital LCD display, the 382213 also 
includes overload and short circuit protection, 
constant voltage/current, easy snap terminals 
for 5 and 12 Volt outputs, and a current-limited 
front panel LED indicator. 
For more details please refer datasheet.
 

Product Overview

382270 is a Quad Output DC Power Supply 
has two 0 to 30V/0 to 5A outputs plus two 
fixed auxiliary outputs of 3 to 6.5V/3Aand 15V/1A. 
The two 30V outputs can be combined in parallel 
for 10A or in series for 60V. 
Comes complete with 4 pairs of test leads 
(banana plug to alligator clip) and an AC cord.
Line Current Regulation :2mA ±3mA
Line Voltage Regulation :0.1mV ±3mV
Load Current Regulation:2mA ±5mA
Load Voltage Regulation :0.5mV ±3mV
For more details please refer datasheet.

Product Overview

The Extech 382275 power supply is an easy-to-configure, 
highly stable, lab grade DC power supply with maximum 
output power of 600 Watts. 
The new DC power supply offers two degrees of control 
over both current and voltage outputs (course and fine). 
Output is adjustable from 0 to 30 Volts DC and 0 to 20 Amps 
with (0.1 Volts/Amps resolution). 
Dual green LED displays offer easy-to-read, high 
contrast readouts of voltage and current values.
For more details please refer datasheet.

Product Overview

382276 is a Switching Mode DC Power Supply 
has an adjustable output of 0 to 30V/ 20A 
with two user-defined presets 
and one 13.8V/20A factory preset. 
Power supply features dual LED displays, 
high RFI immunity, excellent EMI, and 
a Thermostatic Control Fan.
Additional features include over-voltage, 
over-temperature, and short circuit protection. 
Operates at 220V, 50/60Hz and comes 
complete with AC power cord.
For more details please refer datasheet.
 

Product Overview

Extech’s DCP36 power supply has 80W 
constant power topology and has autoranging 
Voltage and Current output. 
This compact and lightweight unit provides 
easy portability, and is ideal for tight 
workbenches with limited space. 
It features 4-Digit LED displays, 3-programmable 
presets, front/rear output terminals, and remote 
sensing for accurate applied voltage at load point.
Line Current Regulation :≤10mA
Line Voltage Regulation :≤4mV
For more details please refer datasheet.

Product Overview

The Extech DCP42 is a 160 W Switching Power Supply. 
The single-output, continuous power supply with USB 
offers high efficiency electrical power conversion
for greater energy conservation and lighter weight. 
Complete with power cord, software, and USB cable.
Software includes DC ramp and waveform generator.
Line Current Regulation: ≤0.1% (90-264V AC)
Line Voltage Regulation:≤0.02% (90-264V AC)
Load Current Regulation :≤0.5% (10-90% rated voltage)
Load Voltage Regulation :≤0.15% (10-100% rated current)
Output Current:0 to 10A
For more details please refer datasheet.

Product Overview

DC Regulated Power Supply (Single Output)
ME 230 (0-30V/2A), ME 231 (0-30V/5A)
High accuracy, high stability
Over load & short circuit protection
Allow full scale long time operation
Voltage and current continuously variable 
within nominal value
Output Voltage Fixed 5V/3.3V
Output Current 1A
Source Regulation <5mV
Load Regulation <15mV
For more details please refer datasheet.

Product Overview

DC Regulated Power Supply (Dual Output)
ME 240 (0-+30V/2A), ME 241 (0-+30V/5A)
High accuracy, high stability
Over load & short circuit protection
Allow full scale long time operation
Voltage and current continuously variable
within nominal value
CC/CV indication
Dual Output Voltage 0-+30V
Dual Output Current 0-2A(ME 240) / 0-5A(ME 241)
Fixed Output 5V/2A
For more details please refer datasheet.

Product Overview

Multiple DC Regulated Power Supply
Short circuit & overload protected
High accuracy, high stability
Allow full scale long time operation
Voltage and current continuously variable 
within nominal value.
Source Regulation <0.05%
Load Regulation <0.05%
Ripple & Noise <1mV (rms)
Recovery time <50ms
Accuracy +1%, +1 Digit
For more details please refer datasheet.

Product Overview

High resolution programmable electronic load
Menu operation by front keypad and rotary switch
Large LCD display with backlit both current
/voltage/power values
Constant current and constant power mode
Over current or power protection
Memory: Store & recall setup data for different
applications
Series/parallel connections
Interface to computer
Safety design
For more details please refer datasheet.