Double Action Hydraulic Press - MDHP-10 -
Eight point adjustable guides with
replaceable Phosphor Bronze liners
Working pressure: 315 kg/cm2 (max)
Type of main cylinder: Double acting
or Single Acting
Black Holder Capacity: 100 millimeter
Main Cylinder Capacity :100 millimeter
Press Frame Design :Tie rod
Press Frame Construction: Steel Fabricated
& Stress Relieved
Blank holder stroke: 600 millimeter
Bolster Locking type:Fixed
For more details please refer datasheet.
|
Fume Hood (Fssai) - MFH-100 G -
This is auto by pass fume hood model designed
for use in academic and research settings.
This model gives great functionality for its price.
It is extremely spacious and employs no frills
approach to fume hood design to give academic
institutions and startups a product that is
exactly suited to their needs.
Air flow : Approx 1000cubic meter/hour
Noise level : Not more than 65 dB
Face Velocity: 0.5m/s or 100 feet per minute
Spare/Accessories: Gas/Vacuum tap,...
For more details please refer datasheet.
|
Vented Chemical Storage Cabinet - MCS -6 -
Vented Chemical Storage Cabinet
Inner size: 61"(W) x 18"(D) x 72" +15°(H) inch
Indicator/Controller: Indicator for filter replacement
Cabinet material: PCRC sheet duly powder coated
from outside with rust resistant three layer special
epoxy coating from inside.
Trays: 5 no. of adjustable trays (SS304 grade,
coated with highly chemical/acid resisting epoxy coating.
Chemical fume filter: Pre filter and Activated carbon
filter to exhaust out all the fumes
For more details please refer datasheet.
|
Willy Mill - MDB-179 A/B/C -
Two stationary blades and rotor with
four cutting edges, which revolves
high speed to produce a shearing
action which minimizes loss of
moisture due to heat
A) Small with 14 HP Motor
B) Medium with ½ HP Motor
C) Large with 1 HP Motor
With 20, 40, 60 mesh sieve
For more details please refer datasheet.
|
Ball Mill - MLB -181 -
Laboratory Ball Mill for mixing and grinding
electrically operated having capacity from few gm.
To 1/2 Kg. fitted with variable speed DC gear
motor with the maximum 100 RPM.
The jar is made of Stainless 304 and having S.S.
304 ribs easily removable for cleaning with
Stainless Steel balls of dia 10mm to be put in
the jar for mixing and grinding powders.
Jar is interchangeable and easily removable
light in weight and compact unit to operate
on 220 volts 50cy Ac only
For more details please refer datasheet.
|
Fluccolator (Jar test apparatus) - MFJ-6/MFJ-4 -
Fluccolator (jar Test Apparatus) for Four/Six
Jars of 1 ltr.
Capacity, Provided with speed control from 20
to 120 RPM +10 RPM, stirrer are driven by PMDC
motor V-belt & pulley drive.
Entire unit is mounted on angle iron frame,
with side support rods.
Stainless Steel rods with lifting knobs &
Stirring Paddle.
Paddle can disengaged individually without
interruption of other stirrer, spacing between
rods permit use of 1000ml.
For more details please refer datasheet.
|
Serological Water Bath - MSB-40 -
Complete inner chamber made of HIGHLY
POLISHED STAINLESS STEEL 304.
Outer Chamber is made of Mild Steel Sheet,
finished with powder coated paint.
Pyramidal shaped cover (Stainless Steel)
and perforated removable diffuser are
standard accessories.
Temperature is controlled by PID Digital
Temperature Controller from ambient to
90°C ±0.5°C Suitable to operate on 220v,
single phase, 50Hz AC Supply. (without racks)
For more details please refer datasheet.
|
Dry Bath Incubator - MDB - 70 -
24 Holes for 12mm tubes, temp. +5°C
above ambient to 70°C.
Maximum heating power 125W, Temperature
Controller PID, Timer1 min to 99 minutes,
LCD Display for time & temperature,
Anodized Aluminum block.
220V AC Supply.
Available with Buzzer alarm & Overheat protection.
For more details please refer datasheet.
|
Laboratory Refrigerator / Cold Cabinet - MCR - 12 -
These cabinet are designed for storing
of culture, specimen & regents in laboratories.
Inside made of Plastic with adjustable shelves.
Frost Free chamber. Outer body Gl Powder Coated
Full View front vacuum glass door.
Microprocessor Digital Temp. Indicator cum controller
Temperature Range and Accuracy 0°C to 12°C
Capacity: 100/300/400 It.
For more details please refer datasheet.
|
UV Cabinet - MUV-30/MUV-40 -
The U.V. Cabinet is made of mild steel sheet
duly powder coated.
It is fitted within 3 Nos, of tubes short-wave
(254nm) + long-wave (365nm) + Fluorescent light.
The Cabinet, with separate on/off switches for
each tube light.
The samples can be placed in the cabinet from
the front door and viewed from the viewing
window at the top of the cabinet.
MUV-40: Same as above but with short wave filter.
For more details please refer datasheet.
|
Ice Flaking Machine - MIF - 30/50/100 -
Ice Flaking Machine
Fully Automatic microprocessor control
Stainless Steel construction
Continuous Ice Flakes Output
CFC free compressor
Low water level indication
Overload protection
Noiseless operation
Compact Design and low maintenance
For more details please refer datasheet.
|
CO2 Incubator - MCI - 80 -
CO2 concentration Restoration Speed.
Polished stainless-steel chamber, rounded
corners for easy cleaning. Adjustable shelves.
Microorganism Filter at Inlet provides 99%
filtration of bacteria and dust (0<0.3um) and
supplies pure COZ into the incubator.
Door temperature controller prevents condensate
water on glass door of incubator effectively.
Independent audio-visual temperature limiting alarm system.
Alarm function for temperature difference, CO2 over
concentration and concentration difference, door open
time, UV working status.
For more details please refer datasheet.
|
Kjeldahl Digestion Unit - MMK - 193 -
The Kjeldahl method is a classic technique
for quantifying the nitrogen content in
organic and inorganic substances.
Nitrogen serves as a surrogate for measuring
protein concentration.
This apparatus is used for estimation
of Nitrogen content in the Substance by
digestion in flask of capacity 500ml.
Without glass parts and Clamps.
Unit of 6 Test Mantle with 6 energy Regulators
For more details please refer datasheet.
|
Conductivity Meter - MCM-10 -
The Conductivity Meter is a powerful
instrument used for measuring the electrical
conductivity of solutions.
It plays a crucial role in various fields,
including chemistry, environmental science,
and quality control.
3½ digit LED display with facility for automatic
temp.
compensation & digital cell constant.
Along with cond.
Cell & temperature probe(Table Model)
For more details please refer datasheet.
|
Infrared Moisture Balance - MIR - 1 -
Infra red Moisture Balance is used for
determination of the moisture contents
of materials which do not under go chemical
changes when exposed to infrared radiation.
The instrument consist of a 250 watts infra
red lamp, a sensitive torsion balance and
Electronic Regulator/Transformer heat control
device all housed in a compact cabinet.
The instrument is directly calibrated in
percentage of moisture between 0% and 100%.
Capacity: 5/10/20gm
For more details please refer datasheet.
|
Laboratory Stirrers - MLE-100 -
Designed to meet requirements of laboratories,
demanding wide flexibility of stirring operations.
Fitted with AC/DC motor, Chuck for easy inter
chargeability of shaft, Speed regulator with Stand
Color: Brown
Weight: 1500-2000 Grams (g)
Dimension (L*W*H) 28.6 x 24.8 x 23.5 Millimeter(mm)
Power: 220 Volt (v)
Voltage: 380 Volt (v)
Material: Steel
For more details please refer datasheet.
|
