Universal Testing Machine - Computerized - FINE
Universal Testing Machines have a wide range
of applications and number of materials,
metals in different form and shapes can be
tested for variety of tests like Tension,Compression,
Transverse,Bend,Shear,Brinell Hardness etc.
Special attachments are also available for testing
of Flat Belts,Chain Links,Wire Ropes etc.
The oil flow is controlled by the close
loop feedback from the load elongation system.
Test with specific load steps can also be conducted.
User programmable master test templates
For more details please refer datasheet.
|
AC Servo Controlled Ball Screw Type Universal Testing Machine - F-5,10,20,50,100 - FINE
AC Servo Controlled Ball Screw Type Universal Testing Machine
FMI make the 'F' series machines are electronic
screw driven machine with precision screw and column
construction and variable speed drive.
These are high precision high performance universal
testing machines, maximum capacity up to 200 kN.
With the help of computer and micro-computer from
control of load to processing of data are carried
out with excellent performance, reliability,
flexibility and easy operation.
For more details please refer datasheet.
|
Bernoulli's Theorem Apparatus - GN 7201 - MARS
To verify bernoulli's theorem for the flow of real liquid
Hydraulic grade line & the total energy line along the
flow section can be plotted & can be studied
Flow Channel: 265mm x 75mm x 75mm (LxBxH) made of clear
acrylic conduit
Diameter of Conduit(vary cross section): 22mm, 19mm, 16mm,
13mm, 16mm, 19mm, 22mm
Piezometer: 7 Nos. Placed equal spaced at 30mm mounted on
graduated board
Constant Head Tank: 300mm x 300mm x 450mm (LxBxH)
Measuring Tank: 300mm x 300mm x 300mm (LxBxH)
Sump Tank: 600mm x 300mm x 300mm (LxBxH)
For more details please refer datasheet.
|
Reynold Apparatus - GN 7204 - MARS
To determine the Reynold's number and hence
the type of flow from laminar to turbulent
To study transition zone
Tube: Clear acrylic 750mm length, 32mm outer dia.
and 25mm inner dia
Dye Vessel: Made of material SS sheet, 1litrs capacity
Constant Head Tank: 300mm x 300mm x 450mm (LxBxH)
Measuring Tank: 300mm x 300mm x 300mm (LxBxH)
Sump Tank: 600mm x 300mm x 300mm (LxBxH)
Tanks made of SS sheet
Piping & Fittings: Gl material used
For more details please refer datasheet
|
Discharge Over Noteches Apparatus - GN 7206 - MARS
To determine the co-efficient of discharge
of different shape notches.
Notches (Made of Acrylic): a) V Notch
b) Rectangular Notch
c) Trapezoidal Notch
Hook Gauge: 30cm range with mounting provision.
Flow channel provided with constant head water
arrangement with provision of notch replacement.
Flow Channel: 600mm x 250mm x 300mm (LxBxH)
Measuring Tank: 300mm x 300mm x 300mm (LxBxH)
Sump Tank: 600mm x 300mm x 300mm (LxBxH)
Piping & Fittings: Gl material used
For more details please refer datasheet.
|
Impact Of Jet Of Vanes Apparatus - GN 7208 - MARS
To varify the momentum equation by impact
of jet on different shapes
Target (3 Nos.) Made of Acrylic:
a) Hemispherical cup 100mm dia
b) Flat plate 50mm dia
c) Inclined plate 45 degree
Nozzle (SS): 10mm dia, 75mm long
Weighing Scale: To measure jet force
Measuring Tank: 300mm x 300mm x 300mm (LxBxH)
Sump Tank: 600mm x 300mm x 300mm (LxBxH)
Tanks made of SS sheet
Piping & Fittings: Gl material used
For more details please refer datasheet.
|
Pitot Tube test Rig - GN 7210 - MARS
To find the co-efficient of pitot tube
To find the point velocity at the center
of a tube for different flow rates
To plot velocity profile across the cross
section of pipe
Flow Channel: 200mm long made of clear acrylic
conduit with attachment of pointer gauge.
Pressure Measurement: Provided "U" Tube differential
manometer for head loss measurement
Measuring Tank: 300mm x 300mm x 300mm (LxBxH)
Sump Tank: 600mm x 300mm x 300mm (LxBxH)
Tanks made of SS sheet
For more details please refer datasheet.
|
Hydraulic Ram Testing Rig - GN 7214 - MARS
To find out discharge of usefull
and waste water
To find out the efficiency of hydraulic ram
Overhead tank provided as delivery head for
free fall water to ram
Pressure vessel provided to create pressure
upto 0.8kg/cm2
Ram piston made of SS, 15mm dia
Ram made of SS, 50mm dia
Pressure Gauge: 30psi
Overhead Tank: 300mm x 350mm x 1000mm
Water Reservoir Tank: 300mm x 200mm x 150mm (LxBxH)
Piping & Fittings: Gl material used
For more details please refer datasheet.
|
Flow Through Orifice & Mouthpiece - GN 7217 - MARS
To determine the co-efficient of discharge
of different orifice and mouth - pieces.
To determine the co-efficient of velocity & contraction
Orifices (2nos): Material clear acrylic dia.10mm and 15 mm
Mouthpieces (3nos): Material clear acrylic
a) Dia 10 mm (L/D = 1)
b) Dia 10 mm (L/D = 2.5)
c) Dia 12mm (L/D = 2.5)
Pointer Gauge: To measure X-Y co-ordinates of jet
Constant Head Tank: 300mm x 300mm x 450mm (LxBxH)
Measuring Tank: 300mm x 300mm x 300mm (LxBxH)
Sump Tank: 600mm x 300mm x 300mm (LxBxH
For more details please refer datasheet.
|
Orificemeter Test Rig - GN 7220 - MARS
To determine co-efficient of discharge of orificemeter
Orificemeter: 265mm x 75mm x 75mm (LxBxH) made of clear
acrylic conduit
Diameter of Conduit: 25mm ID, centre point dia 13mm
Pressure Measurement: 'U' Tube differential manometer
Measuring Tank: 300mm x 300mm x 300mm (LxBxH)
Sump Tank: 600mm x 300mm x 300mm (LxBxH)
Tanks made of SS sheet
Pizometer tube with scale provided on all tanks for water
level measurement
Piping & Fittings: Gl material used
Valves: 2nos. for drain, 1no. for inlet water control, 1no.
for bypass, 1no. outlet water control
For more details please refer datasheet.
|
Venturimeter Test Rig - GN 7222 - MARS
To determine co-efficient of discharge of venturimete
Venturimeter: 265mm x 75mm x 75mm (LxBxH) made of clear
acrylic conduit
Diameter of Conduit(vary cross section): 13mm & 25mm
Pressure Measurement: 'U' Tube differential manometer
Measuring Tank: 300mm x 300mm x 300mm (LxBxH)
Sump Tank: 600mm x 300mm x 300mm (LxBxH)
Tanks made of SS sheet
Pizometer tube with scale provided on all tanks for water
level measurement
Pump: 0.5HP Single phase, 220VAC±10%
For more details please refer datasheet.
|
Venturimeter & Orificemeter Test Rig - GN 7225 - MARS
To determine co-efficient of discharge of venturimeter
To determine co-efficient of discharge of orificemeter
Venturimeter: 265mm x 75mm x 75mm (LxBxH) made of clear
acrylic conduit-Diameter of Conduit(cross section):13mm & 25mm
Pressure Measurement: 'U' Tube differential manometer
Measuring Tank: 300mm x 300mm x 300mm (LxBxH)
Sump Tank: 600mm x 300mm x 300mm (LxBxH)
Tanks made of SS sheet
Pizometer tube with scale provided on all tanks for water
level measurement
Piping & Fittings: Gl material used
Pump: 0.5HP Single phase, 220VAC±10%
For more details please refer datasheet.
|
Nozzlemeter Test Rig - GN 7228 - MARS
To determine co-efficient of discharge of nozzlemeter
Nozzlemeter: 265mm x 75mm x 75mm (LxBxH) made of clear
acrylic conduit
Diameter of Conduit: 25mm ID, centre point 13mm
Pressure Measurement: 'U' Tube differential manometer
Measuring Tank: 300mm x 300mm x 300mm (LxBxH)
Sump Tank: 600mm x 300mm x 300mm (LxBxH)
Tanks made of SS sheet
Pizometer tube with scale provided on all tanks for
water level measurement
For more details please refer datasheet.
|
Loss Due To Friction In Pipe Lines - GN 7230 - MARS
To determine the friction factor (Coefficient of
discharge)for the 4 different material of pipes.
Pipe Line: Provided 4 nos. of different material
1300mm long ID 15mm (Aluminum, Copper, Brass, GI)
Pressure Measurement: 'U' Tube differential manometer
Measuring Tank: 300mm x 300mm x 300mm (LxBxH)
Sump Tank: 600mm x 300mm x 300mm (LxBxH)
Tanks made of SS sheet
Piping & Fittings: Gl material used
Tee Handle Valve: 8nos.
Pump: 0.5HP Single phase, 220VAC±10%
For more details please refer datasheet.
|
Losses due to Pipe Fitting, Sudden Enlargement & Contraction - GN 7233 - MARS
To determine the friction factor for the pipes
Technical Specifications:
Pipe Line: Provided 2 nos. 1000mm long
12mm Diameter (Elbow Less, Bend Less)
12mm & 25mm Diameter (Sudden & Contraction)
Pressure Measurement:'U' Tube differential manometer
Measuring Tank: 300mm x 300mm x 300mm (LxBxH)
Sump Tank: 600mm x 300mm x 300mm (LxBxH)
Pizometer tube with scale provided on all tanks for
water level measurement
Piping & Fittings: Gl material used
Pump: 0.5HP Single phase, 220VAC±10%
For more details please refer datasheet.
|
Free & Forced Vortex Apparatus - GN 7240 - MARS
To find the surface profile in a free vortex flow
To find the surface and total head distribution in
a forced vortex flow
DC Motor: 1HP
DC Drive (Thyristorized Based): 2 Amps
Voltmeter: 0~220 VDC
Currentmeter: 0~10Amps
RPM Meter (PNP Type): 0~1500
Cylinder: 1no. made by acrylic pipe 600mm long,300mm dia
Provided with SS agitator for forced action
Sump Tank: 600mm x 300mm x 300mm (LxBxH)
For more details please refer datasheet.
|
Piezometer Tube Apparatus (Capillary Tube Viscometer - GN 7242 - MARS
To study piezometer tube for water level measurement
Capillary tube viscometer study
Tube: Clear acrylic 700mm length, 32mm outer dia.
Distance between piezometer tube: 500mm
Piezometer tube length: 450mm
Constant Head Tank: 300mm x 300mm x 450mm (LxBxH)
Sump Tank: 600mm x 300mm x 300mm (LxBxH)
Tanks made of SS sheet
Pizometer tube with scale provided on all
tanks for water level measurement.
Piping & Fittings: Gl material used
Pump: 0.5HP Single phase, 220VAC±10%
For more details please refer datasheet.
|
Metacentric Height Apparatus - GN 7247 - MARS
To determination of the metacentric height
and position of the metacentric height with
angle of heel of ship model.
Ship Model: Size 200 x 200mm with a horizontal
guide bar for aliding weight and removable strips,
graduated arc with pointer with moveable hanger
and set of weights
Pendulum and graduated arc for accurate measurement
of tilt angle
Water Tank: 600mm x 600mm x 300mm (LxBxH)
Tanks made of SS sheet
For more details please refer datasheet.
|
Centre of Pressure (Hydrostatic Force) Apparatus - GN 7250 - MARS
L shaped submerged body 100mm x 100mm x 200mm,
leak proof made of
clear acrylic for better front view
Hanger Type: Made of aluminium for hanging weight
Water Tank: 300mm x 600mm x 300mm (LxBxH)
Tanks made of SS sheet
Valves: 1no. for drain
The whole set-up is well designed and arranged in a good
quality painted structure made of square pipe 300mm x 600mm
x 900mm (LxBxH)
Instruction manual, Set of weights
For more details please refer datasheet.
|
Darcy's Law Apparatus - GN 7252 - MARS
To study the friction in different pipes
and different diameters
To determine the friction factor for Darcy
- Weisbach equation
Pipe Line: 1" fitting with test section 3" diameter
Pipe Test Section: Length 600mm for 3" diameter
Pressure Measurement: 'U' Tube differential manometer
Measuring Tank: 300mm x 300mm x 300mm (LxBxH)
Sump Tank: 600mm x 300mm x 300mm (LxBxH)
Tanks made of SS sheet
Piping & Fittings: Gl material used
For more details please refer datasheet.
|
Axial Fan Flow Apparatus - GN 7255 - MARS
To find out flow rate of air through axial fan
Study the characteristics of air blower
Technical Specifications:
Air Flow Measurement Unit: 2000mm
Test Section: 1000mm
ID Test Section: 124mm & 72mm
OD Test Section: 127mm & 75mm
Orifice Diameter: 35mm
Energy Meter
RPM Meter (PNP Type): 0 ~ 1500
U-Tube manometer for air flow measurement
For more details please refer datasheet.
|
Centrifugal Pump Test Rig (Single Stage - GN 7262 - MARS
To determine total head, pump uutput, overall
efficiency and pump efficiency of the centrifugal pump
To plot head vs discharge, pump efficiency vs discharge,
pump output vs discharge
Pump Capacity: 1HP
RPM: 2800
DC Motor: 1HP/3000RPM
DC Drive (Thyristorized Based): 2 Amps
Energy meter provided for energy measurement
Measuring Tank: 300mm x 300mm x 300mm (LxBxH)
Sump Tank: 600mm x 300mm x 300mm (LxBxH)
For more details please refer datasheet.
|
Centrifugal Pump Test Rig (Double Stage) - GN 7263 - MARS
Study of centrifugal pump characteristics when
-Pumps are connected in series
-Pumps are connected in parallel
Technical Specifications:
Pump Capacity: 1HP - 2nos.
Speed: 2800RPM
DC Motor: 1HP - 2nos.
DC Drive (Thyristorized Based): 2Amps
Voltmeter: 0~220VDC
Currentmeter: 0~10Amps
RPM Meter (PNP Type): 0~3000 - 2nos.
Energy meter provided for energy measurement
For more details please refer datasheet.
|
Reciprocating Pump Test Rig - GN 7265 - MARS
To find the efficiency of reciprocating pump
Reciprocating Pump type: Double acting cylinder
RPM: 320
DC Motor: 1HP
DC Drive (Thyristorized Based): 2 Amps
RPM Meter (PNP Type): 0~1500
Energy meter provided for energy measurement
Measuring Tank: 300mm x 300mm x 300mm (LxBxH)
Sump Tank: 600mm x 300mm x 300mm (LxBxH)
Tanks made of SS sheet
For more details please refer datasheet.
|
Francis Turbine Test Rig - GN 7278 - MARS
To study the operation of a francis turbine
To determine the output power of francis turbine
To determine the turbine efficiency
Supply Head: 10M
Rope brake arrangement with weighing balance
Drum Diameter: 200mm
Discharge measurement through pitot tube with manometer
Sump Tank 250lits: 700mm x 600mm x 600mm (LxBxH)
Tanks made of SS shee
Piping & Fittings: Gl material used
Valves: 1nos. for drain, 1no. for bypass, 1no
Pressure Gauge: 0~4Kg/cm²
For more details please refer datasheet.
|
Pelton Turbine Test Rig - GN 7275 - MARS
To study the operation of a pelton wheel turbine
To determine the output power of pelton wheel turbine
To determine the turbine efficiency
Turbine Type: Pelton
Output Power: 1HP at 1000RPM (approx.)
Spoon: 16nos. Made of aluminium
Discharge: 400LPM Approx.
Supply Head: 25M
Spear and Nozzle: SS-304 (Material Used)
Rotor Shaft: Stainless steel
Jet pressure control through spear headed nozzel
and screw handle arrangement
For more details please refer datasheet.
|
kaplan Turbine Test Rig - GN 7281 - MARS
To study the operation of a kaplan turbine
To determine the output power of kaplan turbine
To determine the turbine efficiency
Turbine Type: Kaplan (Vertical shaft design)
Output Power: 1HP at 1500RPM
Propellor made of die cast iron
Discharge: 1000LPM
Supply Head: 8M
Rope brake arrangement with weighing balance
Drum Diameter: 200mm
Flow measurement through pitot tube with manometer
Sump Tank 250lits: 700mm x 600mm x 600mm (LxBxH)
For more details please refer datasheet.
|
Air Blower Test Rig - GN 7284 - MARS
To find out flow rate of air
Study the characteristics of air blower
Length of Test Section: 1000mm
ID of Test Section: 72mm
OD of Test Section: 75mm
Orifice Diameter: 35mm
Blower: 16no.
Orifice Pipe Inside Diameter: 72 mm
Dimmer state: 2Amps.
Voltmeter: 0~220VDC
Currentmeter: 0~20Amps
RPM Meter with PNP sensor
For more details please refer datasheet.
|
Triaxial Test Apparatus - ME TTA - MARS
The Triaxial Test Apparatus is a crucial piece
of equipment in the field of civil engineering,
specifically within geotechnical engineering.
It is used to determine the mechanical properties
of soil under various loading conditions.
Purpose: It evaluates the strength and other
properties of soil or rock specimens by applying
loads in three perpendicular directions.
For more details please refer datasheet.
|
Relative Density Test - ME RDT - MARS
The Relative Density Test is an important test
in civil engineering that helps determine the
relative compactness of cohesionless soils,
such as sands and gravels.
Application: It’s particularly useful in
geotechnical investigations to assess soil
stability for construction projects.
Understanding the relative density of soil
is essential for ensuring that structures
are built on a solid foundation.
For more details please refer datasheet.
|
Compression Testing Machine - ME CTMF-1000 - MARS
Capacity : 1000 KN with Hydraulic operation
Digital Display Indicator with load and
capacity display (Microcontroller based)
Leas count : 0.01 KN
Indicator for PEAK, KG, KN and start
Auto cut at Full Load / Peak Load
Max. Clearance between Platens 390 mm
Max. Clearance between Side Platens 390 mm
Platen Size : 140 mm2
Piston Diameter : 78.7 mm
Hand Wheel control for Hydraulic Pressure
For more details please refer datasheet.
|
Universal Testing Machine - ME UTM - MARS
The Universal Testing Machine (UTM) is a
versatile piece of equipment widely used
in material testing laboratories. Here are
some key points about the UTM:
Functionality: It is designed to test
various mechanical properties of materials,
such as tensile strength, compressive strength,
flexural strength, bending, shear, and hardness.
Applications: UTMs are essential for quality control,
research, and development, as they help assess the
strength, durability, and elasticity of materials.
For more details please refer datasheet.
|
Epicyclic Gear Train Apparatus - GN 7510 - MARS
Epicyclic Gear Train Apparatus
No. of teeth on the input wheel :
RING wheel(Internal Gear) : 62 teeth
Material Mild Steel
Color Blue and Red
Weight 100-150 Kilograms (kg)
Voltage 220-240 Volt (v)
Usage Industrial use
Type machine
For more details please refer datasheet.
|
Tensile Testing Machine - ME TTM - MARS
The Tensile Testing Machine is a crucial instrument
in material testing laboratories for measuring the
tensile strength of materials.
Purpose: It evaluates the mechanical properties of
materials by applying a tensile (pulling) force to
a test specimen until it fails.
Function: The machine can use either an
electro-mechanical or hydraulic system to apply the load.
Significance: By measuring the force required to
elongate and ultimately break a specimen,
For more details please refer datasheet.
|
Survey Lab Equipment Total Station - ME TS-30X - MARS
Calculation, Sub Area division , reference Line,
Projection Systems, National grids System ,
Grid to Ground,select Coordinate in order NEZ & ENZ ,
settings (units, precision,
Accuracy 1 Sec
Least Count 0.1 Sec
TELESCOPE
Magnification 30X
Image Erect
Minimum Focus Less than 2 meters
Focus Instrument must have auto focus facility.
For more details please refer datasheet.
|
Survey Lab Equipments Digital Theodolite - 05 - MARS
We are a trusted supplier of a qualitative array
of Digital Theodolite to our highly esteemed clients.
Minimum Reading: 1" /5" Selectable
Accuracy: 2" / 5" Optional
Level & Compensation
Plate Level: 30"/2mm
Circular Level: 8'/2mm
System Auto Compensator:
Liquid-electric Detection ±4' Circular Level ±3'
Vertical Compensator:
Liquid-electric Detection ±1" Plate Level 30"/2mm
For more details please refer datasheet.
|
