Product Overview

Universal Testing Machines have a wide range 
of applications and number of materials,
metals in different form and shapes can be 
tested for variety of tests like Tension,Compression,
Transverse,Bend,Shear,Brinell Hardness etc.
Special attachments are also available for testing 
of Flat Belts,Chain Links,Wire Ropes etc.
The oil flow is controlled by the close 
loop feedback from the load elongation system. 
Test with specific load steps can also be conducted.
User programmable master test templates
For more details please refer datasheet.

Product Overview

AC Servo Controlled Ball Screw Type Universal Testing Machine
FMI make the 'F' series machines are electronic 
screw driven machine with precision screw and column 
construction and variable speed drive. 
These are high precision high performance universal 
testing machines, maximum capacity up to 200 kN. 
With the help of computer and micro-computer from 
control of load to processing of data are carried 
out with excellent performance, reliability, 
flexibility and easy operation.
For more details please refer datasheet.

Product Overview

The Extech SDL150 records data on an SD card 
in Excel format. 
It has a dual backlit display of oxygen 
concentration and temperature. 
It measures dissolved oxygen from 0 mg/L to 20.0 mg/L
and 0% to 100.0% oxygen, plus temperature from 
0°C to 50°C (32 to 122°F). 
Includes automatic temperature compensation 
from 0°C to 50°C via temperature probe sensor 
built into polarographic type oxygen probe. 
Offset adjustment used for zero function to 
make relative measurements. 
For more details please refer datasheet.

Product Overview

407510 is a Heavy Duty Dissolved Oxygen Meter
with PC interface. 
Recall Min, Max and Average readings. 
Featuring Data Hold and a Built-in RS-232 PC 
serial interface with optional data acquisition 
software and data logger. 
Auto power off saves battery life. 
DO measurements from 0 to 20.0 mg/L.
Complete with 0.8" (20mm) diameter probe 
on 13ft (4m) cable, 5 membranes, rubber holster,
9V battery and hard case.
For more details please refer datasheet.

Product Overview

The Extech 601100 is a PVC-bodied, 
easy-to-clean, flat surface pH electrode.
The product is ideal for solid products 
with minimal moisture like cheese, soils,
or electrophoretic/agar gels. 
Includes 99 cm cable with BNC connection.
For more details please refer datasheet.

Product Overview

The Extech 67500B is a polycarbonate 
ORP electrode with a platinum sensing
surface and a sealed reference. 
It is 13 mm by 154 mm long.
For more details please refer datasheet.
 

Product Overview

CL200 is an ExStik® Chlorine Meter. 
This revolutionary technique measures Direct
Total Residual Chlorine from 0.01ppm to 10ppm.
It makes non-subjective measurements unaffected
by interferences associated with traditional 
colorimeters and spectrophotometers like sample 
color, turbidity, light, and pollutants.
This product comes with an electrode, five packs 
of 10 reagent tablets (50 tests), a protective 
sensor cap, a sample cup with cap, 
four CR2032 batteries, and a 48” neck strap.
For more details please refer datasheet.

Product Overview

The Extech EC150 is a Conductivity/TDS
/Temperature Meterwith high-accuracy 
multi-ranging sensor. 
It features auto power off with disable, 
adjustable conductivity to TDS ratio factor
from 0.4 to 1.0, data hold and low battery 
indication. 
The waterproof design withstands wet environment
and meets IP65 standard. Includes meter, 
protective sensor cap, and four LR44 button batteries.
For more details please refer datasheet.

Product Overview

The Extech EC210 is a handheld Conductivity Meter. 
Its long-life, carbon rod combination electrode 
measures conductivity, TDS and temperature. 
The meter features three ranges for conductivity 
and TDS, plus adjustable temperature compensation
factor to maintain accuracy. 
Units of measure include µS/cm,mS/cm,ppm,°F, and °C.
TDS    1200ppm, 12,000ppm, 66,000ppm
TDS Basic Accuracy: ±2% FS
TDS Max Resolution: 1ppm, 10ppm, 100ppm
Temperature (Contact): 32 to 122°F (0 to 50°C)
For more details please refer datasheet.

Product Overview

The Extech EC400 ExStik® features six units 
of measure, internal memory that stores 
up to 15 labeled readings for easy recall, 
adjustable conductivity to TDS ratio factor
from 0.4 to 1.0, and self-calibration upon power up. 
The EC400 incorporates the latest microprocessor 
chip technology and patented sensor technology to 
enable the simultaneous measurement of conductivity, 
TDS, salinity, and temperature. 
With the touch of a button the EC400 allows you the 
flexibility of interchangeable cell constants and has
made the job of testing fast,accurate,and repeatable. 
For more details please refer datasheet.

Product Overview

The EC500 is Conductivity/TDS/Temperature Meter.
Measures 5 parameters including Conductivity, TDS, 
Salinity, pH, and Temperature using one electrode.
Analog bargraph indicates trends. Memory stores 
up to 25 labeled readings. 
Waterproof meter with high-accuracy multi-ranging 
sensor.
Features Auto Power off with disable. 
Complete with meter and electrode, protective cap, 
sample cup, four 3V CR-2032 batteries, 
and 48" (1.2m) neckstrap. 
For more details please refer datasheet.

Product Overview

The 7-in-1 EC600 Kit measures Conductivity,TDS, 
Salinity, Resistivity, pH, mV and Temperature. 
It has automatic one button calibration of 4, 7 
and 10 pH with a choice of three point 
calibration for better accuracy and it 
provides automatic temperature compensation. 
One point conductivity calibration automatically 
recognizes eight calibration solutions from USA,
Europe, and China. 
Memory stores up to 300 readings with series number,
measured value and temperature. 
For more details please refer datasheet.
 

Product Overview

Exclusive Oyster Design can be used in the 
lab or in the field. 
Large LCD built into adjustable “flip-up” 
cover displays pH or mV and Temperature simultaneously.
Splash proof housing and front panel tactile touch 
pad to slope and calibrate. 
Rugged design for handheld or benchtop use; neckstrap for
“hands-free” operation. 
Measures pH (0.00 to 14.00pH), mV (-999mV to 999mV)
and Temperature (32.0°F to 212.0°F /0.0°C to 100.0°C).
Accurate to 0.02pH, 2mV, 0.8°F/0.5°C and resolution 
of 0.01pH, 1mV and 0.1°.
For more details please refer datasheet.

Product Overview

The waterproof ExStik® PH100 pH meter 
by Extech is a rugged, accurate, reusable stick 
pH meter with unique data storage features that
make it exceptionally easy to use. 
The flat surface electrode allows you to measure 
pH in liquids, semi-solids, and solids while 
limiting electrode breakage and clogged junctions.
The LCD readout displays pH, temperature, and an 
analog bar graph that shows trends in acidity or
alkalinity and indicates when the reading is stable.
Other features include automatic temperature compensation,
auto power off, low battery indicator and data hold.
For more details please refer datasheet.

Product Overview

Now you can test pH on the spot easily 
and accurately with the ExStik® PH110 
Waterproof pH Meter. 
The durable ExStik® meter features a flat
surface refillable electrode for measuring pH
in liquids, semi-solids, and solids – no more
electrode breakage or clogged junctions.
Since you can refill the ExStik® quickly, 
you won't need to worry about the shelf life
of its electrode. 
The ExStik® meter is an invaluable tool for
measuring the pH in shampoo, body wash, 
facial cleansers, lotions, creams, and more.
For more details please refer datasheet.

Product Overview

The Extech PH220-C is a palm-sized pH meter
with a cabled electrode that can measure pH, 
voltage potential difference (mV), and temperature.
A built-in microprocessor provides for automatic 
buffer recognition, and the internal memory 
stores up to 25 readings. 
This completely waterproof unit features a 
large LCD display with simultaneous measurement 
readings and low battery indictor. 
Includes cabled pH electrode, protective holster,
pH buffers, and 9V battery.
For more details please refer datasheet.

Product Overview

ORP meter with rugged flat surface ORP electrode 
and high resolution of 1mV.
Memory: 15 readings
ORP: -999 to 999mV
ORP Basic Accuracy: ±4mV
ORP Max Resolution: 1mV
Certifications: CE
IP Rating: IP57
Power: 4 × CR-2032 (3V) batteries
Warranty: 2 years
Weight: 3.8oz (110g)
Dimensions: 1.4 × 6.8 × 1.6" (35.6 × 172.7 × 40.6mm)
For more details please refer datasheet.

Product Overview

Records data on an SD card in Excel® format
Memory: 20M readings on 2G SD card
ORP : -1999 to 1999 mV
ORP Basic Accuracy: ±0.5% mV
ORP Max Resolution: 1mV
pH: 0 to 14pH
pH Basic Accuracy: ±0.02pH
pH Max Resolution: 0.01pH
Temperature (Contact): 32 to 149°F (0 to 65°C)
Temperature (Contact) Basic Accuracy: ±1.8°F/1°C
Temperature (Contact) Max Resolution: 0.1°
For more details please refer datasheet.

Product Overview

Power supply & digital meters housed in metal cabinet 
having symbol diagram printed, socket for LED Input,
connections of various components, all important 
outputs & test point brought at Bakelite front panel.
Objective :To determine Plank's constant (h) using LED                       
Output  voltages (Regulated) : 0-2VDC
Meters(Digital) : 0-2000uA / 0-20mA, 2VDC/Temp. Meter
Also provided with 3 Sets of LEDs mounted on Ptfe mount
with suitable connectors, temperature controlled oven
range: Ambient to 65°C, patch chords &instruction manual
For more details please refer datasheet.

Product Overview

Plot the characteristics of a selenium photocell
& to verify the Inverse Square Law of light
On Board Analog Moving Coil Meters (65mm Round)
Voltmeter : 0-500mVDC (0 to 1 VDC)
Ammeter : 0-1000 MicroADC
Selenium photocell mounted in the metal box.
Lamp holder with 60-watt bulb
High quality Bakelite used as front panel of 
270mm x 170mm & mounted on light weight shock
proof plastic cabinet
For more details please refer datasheet.

Product Overview

Plot the input, output and transfer characteristics
of a PNP & NPN transistor in common emitter & common 
base configuration.
Inbuilt Variable DC Regulated Power Supplies
Output  voltages : 0-1VDC, 0-10VDC
On Board Analog Moving Coil Meters (60mm x 35mm )
Voltmeter: 0-1VDC, 0-10VDC
Ammeter: 0-50mADC, 0-250uADC/0-50mADC (Dual range)
Transistors provided
PNP: CK 100
NPN: CL 100 
For more details please refer datasheet.
 

Product Overview

We are counted among the trusted supplier of SCR 
Characteristics Apparatus to our widely spread clients.
Plot anode current Vs anode cathode voltage characteristics,
gate characteristics (open gate) and (gate connected)   
Inbuilt Variable DC Regulated Power Supplies
Output  voltages: 0-30V DC 0-1.2 V DC
On Board Analog Moving Coil Meters(60 mm x 35 mm )
Voltmeter: 0-1.2V/0-30V (of dual range).
Ammeter: 0-200MicroADC, 0-1.2/0-30mA(Dual range)
SCR: 2P4M
For more details please refer datasheet.

Product Overview

FET Characteristics Apparatus is widely 
used in analog electronics lab to cater to
the varied demands of clients.
Plot Static & Transfer Characteristics.
Inbuilt Variable DC Regulated Power Supplies
Output voltages : 0-10VDC, 0-20VDC
On Board Analog Moving Coil Meters(60 mm x 35 mm )
Voltmeter : 0-10VDC, 0-20VDC
Power requirement : 230 VAC 10%, 50Hz.
For more details please refer datasheet.

Product Overview

Plot frequency response characteristics 
of Microphone and Loudspeaker.
Loudspeaker of 8.0 ohm.
Capacitance Microphone
Sound Level Processing circuit board.
High quality bakelite used as front panel 
of 270mm x 170 mm & mounted on light weight 
shock proof plastic cabinet
For more details please refer datasheet.
 

Product Overview

It finds application in analog electronics lab
as per the requirements of our patrons. 
It is fabricated using premium quality raw material 
and progressive machinery at our vendors unit in 
compliance with the industrial set norms and standards.
Tunnel Diode Characteristics Apparatus stands high on
performance, quality, durability and strength, 
leading to high rising demands in domestic Uses.
For more details please refer datasheet.

Product Overview

PN Junction Diode Characteristics Apparatus 
is analog electronic lab equipment.
Supreme quality material and technologically
advanced machinery is used in its making at our 
vendors’ unit in compliance with the prevailing 
industrial norms and standards.
Inbuilt Variable DC regulated power supplies
Output voltage : 0-3VDC, 0-30VDC
On Board Analog Moving Coil Meters (60 mm x 35 mm )
For more details please refer datasheet.

Product Overview

Symbol diagram printed on Aluminum Front Panel 
& all important test Points are brought out
on front panel.
Temp. Vs resistance at different voltages.
Voltage Vs current at different temperatures.
Current Vs time at different voltages
Output Voltage : 0-10 VDC
Voltmeter : 0-10 VDC
Ammeter : 0-500MicroADC
For more details please refer datasheet.

Product Overview

Inbuilt Variable DC Regulated Power Supply
Output voltages : 0-30VDC
On Board Analog Moving Coil Meters (60mm x 35mm )
Voltmeter : 0-10VDC, 0-30VDC
Resistance & Diode provided
Zener Diodes : 5.1V & 8.2V
Series Resistance : 1 Nos.
Load Resistances : Selectable through Band Switch
For more details please refer datasheet.

Product Overview

Inbuilt VariableDC Regulated Power Supply
Output voltages : 0-15VDC
On Board Analog Moving Coil Meters (60 mm x 35 mm )
Voltmeter : 0-15VDC
Ammeter : 150MicroADC/15mADC (dual range)
Resistance & Diode provided
Zener Diode : 5.1V, 6V, 8.2V
Symbol diagram printed on Aluminum Front
Panel & all important test Points
For more details please refer datasheet.

Product Overview

Forward and Reverse bias V-I characteristics of 
PN junction diode, Zener diode& forward bias 
characteristics of a LED.
Outputvoltage (Regulated): 0-3V/30V DC (Selectable)
Meters(Analog): 65mm round 0-3V/30V DC(Dual Range),
0-100uA / 10mA DC (Dual Range).
Housed in PVC cabinet, symbol diagram printed, 
connections of various components (PN Junction Diode 
0A 79, Zener diode 5.1V, LED's (Red, Green & Yellow )),
For more details please refer datasheet.

Product Overview

Reverse saturation current Vs temperature 
in reverse biased PN junction Diode.
Inbuilt Variable DC Regulated Power Supply
Output voltages : 0-20VDC
On Board Analog Moving Coil Meters (60mm x 35mm)
Voltmeter : 0-20VDC
Ammeter : 0-50MicroADC
Oven, Thermometer & Diode
Electric oven
Mercury thermometer
For more details please refer datasheet.

Product Overview

To Study The Characteristics & applications 
of Diac, Triac, SCR, UJT
It is used in scientific industry
for various purposes as per the requirements.
High grade raw material and machinery is used
in making Characteristics & Applications Of 
Basic Thyristor under the vigilant eye of experts.
It has gained us huge appreciation for its accuracy,
quality, durability, reliability and a long service life.
For more details please refer datasheet.

Product Overview

Symbol diagram printed on Aluminum Front Panel
& all important test Points are brought out on 
front panel.
Inbuilt Variable DC regulated power supply
Output Voltage : 0-50VDC
On Board Analog Moving Coil Meters (60mm x 35mm )
Voltmeter : 0-50VDC
Ammter : 0-2.5mA/0-25mADC (dual range)
Accessories P ower chord, Patch chords & Manual.
For more details please refer datasheet.

Product Overview

Triac Characteristics Apparatus (V-I)
Housed in PVC cabinet, symbol diagram
printed,connections of Triac (BT 136) ,
all important outputs & test points brought
at Bakelite front panel.
Inbuilt DC regulated power supplies
Output Voltage : 0-3VDC, 0-30VDC
On Board Analog Moving Coil Meters (60mm x 35mm)
Ammeters : 0-5mADC, 0-600MicroADC/0-60mADC
For more details please refer datasheet.

Product Overview

Verification Of Kcl & Kvl stands highon quality, 
durability, performance and has a long life
We are an acclaimed supplier of Verification 
Of Kcl & Kvl to our highly honored clients
Inbuilt Variable DC regulated power supply
Output Voltage : 0-3VDC
On Board Analog Moving Coil Meters (65mm x 35mm)
Voltmeter : 0-3VDC, 0-250mA
Power requirement : 230 VAC 10%, 50Hz.
For more details please refer datasheet.

Product Overview

Network Theorems stand high on quality, durability,
accuracy, reliability, strength and accuracy. 
Superposition Theorems.
Thevinin's Theorems.
Norton Theorems
Maximum Power Transfer Theorems.
Output Voltage :12VDC, 5VDC
On Board Analog Moving Coil Meters (60 mm x 35 mm )
Voltmeters : 0-3V/ 0-15V ( Duel Range )
Ammeter : 0-25mA/0-250mA (Duel Range )
For more details please refer datasheet.

Product Overview

Network Theorems stand high on quality, durability,
accuracy, reliability, strength and accuracy. 
Superposition Theorems.
Thevinin's Theorems.
Norton Theorems
Maximum Power Transfer Theorems.
Output Voltage :12VDC, 5VDC
On Board Analog Moving Coil Meters (60 mm x 35 mm )
Voltmeters : 0-3V/ 0-15V ( Duel Range )
Ammeter : 0-25mA/0-250mA (Duel Range )
For more details please refer datasheet.

Product Overview

Observe change in the carrier amplitude according
to the amplitude of the modulating signal.
Recovery of modulating signal from demodulator circuit.
In built IC based DC regulated power supply +12V/ 500mA
On board sine wave audio frequency signal generator
Frequency: 1KHz
Amplitude: 0-2Vpp Approx.
On board carrier signal generator
Frequency: 455 KHz 
For more details please refer datasheet.

Product Overview

Observe change in the carrier frequency 
according to the amplitude of the modulating signal.
Calculate modulation index of the modulated signal 
Recovery of modulating signal from demodulator circuit.
In built IC based DC regulated power supply +12V/ 250mA
On board sine wave audio frequency signal generator
Frequency: 2 KHz & 4KHz Amplitude: 0-2.8Vpp Approx.
Demodulation circuit using phase locked loop IC LM 565
Weight shock proof plastic cabinet
For more details please refer datasheet.

Product Overview

Observe flat top samples, natural samples, 
sample & hold at different sampling frequencies.
Recovery of modulating signal from demodulator circuit.
In built IC based DC regulated power supply +12V, +5V 300mA
On board sine wave audio frequency signal generator
Frequency: 1 KHz & 2KHz Amplitude: 0-10Vpp & 0-4 Vpp Approx
On board sampling pulse generator
Frequency: 8KHz,16KHz,32KHz, 64KHz 
Amplitude: 5Vpp Approx
For more details please refer datasheet.

Product Overview

Observe  the delta modulation & demodulation of
a modulating signal
Output voltage(Regulated): +12V & +5V/300mA (Inbuilt)
Audio frequency:300Hz/0-4V P-P
Carrier frequency:16KHz / 5V P-P Approx.
Housed in  PVC cabinet, circuit diagram printed,
connections of various components (IC LM 311, IC 74193
& IC DAC 0800), allimportant outputs & test points
brought at glass epoxy front panel.
For more details please refer datasheet.

Product Overview

Logic Gates Using Six Ttl Ics 6 In 1 A 
stands high on quality, accuracy, performance,
durability and strength, leading to high 
rising demands in the market. 
It is designed using superior quality raw 
material and modern machinery at our vendors
unit in adherence with the industrial prevailing
norms and standards. .
For more details please refer datasheet.
 

Product Overview

RTLBasic Logic Gate Apparatus has been designed
to verify the truth table for ‘OR’Gate, ‘AND’Gate,
‘NOT’Gate, ‘NOR’Gate, and ‘NAND’Gate using RTL log 
stands high on quality, accuracy, performance,
durability and strength, leading to high 
rising demands in the market. 
Circuit diagram printed on Glass Epoxy PCB 
& all important IC’s & test points are brought
out on front panel
For more details please refer datasheet.

Product Overview

Verification of Booleon Algebra and Demorgan’s Theorems
Digital Trainer to verify the following Experiments:
A.Verification of Baisc Logic Gates,
B.Verification of Booleon Algebra,
C.Verification of Demorgan’s Theorems
Technical Specifications :
Inbuilt Fixed / Variable DC Regulated Power Supply
Output Voltages : 5VDC
For more details please refer datasheet.

Product Overview

Flip Flops Using NAND Gate & TTLIC’s
Technical Specifications :
Inbuilt Fixed DC Regulated Power Supply
Output Voltages : 5VDC
IC’s Indicator Provided
IC : 7400
     : 7410
     : 7474
     : 7476
For more details please refer datasheet.

Product Overview

The instrument has been designed to study: 
A.Universal shift register using IC 74194
B.Serial in,Parallel out shift register using IC 7495
C.Parallel in,Parallel out shift register using IC 7495
D.Parallel in,Serial out shift register using IC 7494
E.Serial in,Serial out shift register using IC 7494
Output voltage(Regulated) : 5VDC (Internally connecte
Also provided with patch chords & instruction manual.
For more details please refer datasheet.

Product Overview

8 Bit Analog to Digital Converter has been designed
to study and verify the outputs of 8 Bit Analog to
Digital converter.
Inbuilt Variable / Fixed DC Regulated Power Supplies
Output Voltages: 0-5VDC
               : 5VDC
               : 4VDC
On Board Digital Meter
Voltmeter: 20VDC
For more details please refer datasheet.

Product Overview

4/8 Bit Digital to Analog Converter has been designed 
to study and verify the Truth Tables of 4/8 Bit Digital
to Analog converters. 
Inbuilt Fixed DC Regulated Power Supplies
Output Voltages : 5VDC
                : +15VDC
On Board Digital Meter
Voltmeter : 2VDC - 20VDC
Power requirement : 230 VAC 10%, 50Hz.
For more details please refer datasheet.

Product Overview

To study various commutation techniques (A,B,C,D,E
and F) & observe outputs on LED.
Output voltages 12V DC/ 300mA & 6V AC/ 300m Housed
in PVC cabinet, circuit diagram printed, conne various
components & test points brought out
at Glass (PCB) front panel.
Also provided with patch chords & instruction manual.
Power Requirement: 220VAC +10%, 50Hz
For more details please refer datasheet.

Product Overview

Light Intesity Control Using SCR’s is Designed
to study light dimmer circuit using SCR & TRIAC.
220VAC/ 50Hz operated circuit.
SCR 2P 4M, Triac BT 136 is used in circuit
On board control for intensity.
On board lamp holder.
Circuit diagram printed on front panel & test 
points brought out on front panel.
For more details please refer datasheet.
 

Product Overview

SCR Firing Circuit designed to study various type 
of firing circuit & observe waveforms on CRO
Firing circuits used.
I) R type triggering circuit .
Ii) RC type triggering.
Iii) UJT triggering.
Iv) DC bias triggering.
In built IC based DC regulated fixed power supply 
+12VDC/150mA & 9VAC.
For more details please refer datasheet.

Product Overview

To study stepping up of DC voltage by change 
in duty cycle of the pulse at the gate of MOSFET
Output voltage: 20V DC/5A, +12V DC/300mA 
& 5V DC/300mA Instrument provided with on board Lamp
holder, frequency and duty cycle control of triggering
pulse.
Housed in wooden cabinet, circuit diagram printed, 
connections of driver circuits (Op-amp and Power 
Transistor), MOSFET & test points brought out
at Bakelite front panel.
For more details please refer datasheet.

Product Overview

To study single phase half wave, full wave
& fully controlled bridge rectifier/converter
using SCR's & observe wave form on CRO.
Output voltage :10-0-10V AC
Meters (Analog): 0-6V AC, 0-10V DC, 0-200mA DC
Instrument provided with on board load 
resistance 50 ohms - 1 kohm (selectable using 
Band Switch) & phase angle control Potentiometer.
Power Requirement: 220VAC ±10%, 50Hz
For more details please refer datasheet.
 

Product Overview

To study and control speed of a DC Motor in SCR
based circuit using RC triggering.
Meters (digital) : 0-200V DC, 0-500mA DC Instrument 
provided with 1/12 HP DC Motor, on board phase
angle control Potentiometer.
Housed in Metal cabinet, circuit diagram printed, 
provided with on board phase angle control Potentiometer.
connections of various components & test points brought
out at Bakelite front Panel.
Power Requirement: 220VAC ±10%, 50Hz
For more details please refer datasheet.

Product Overview

To observe and study line commutation principle
in a three phase half controlled
Bridge convertor using R & RL Load
The setup comprises of firing unit & power unit.
Operating voltage: 3 Phase, 415V AC
Output voltage : 0-150V DC (usually offload output
goes up to 180V DC depending on line voltage)
Meters (Digital) : 0-5A DC &0-300V DC
Power Requirement: 415VAC ±10%, 50Hz
For more details please refer datasheet.

Product Overview

Speed Control of DC Motor using 3 Phase 
Fully Controlled Converter
Operating voltage: 3 Phase, 415V AC
Output voltage: 0-220V DC (depending on line voltage)
Meters (Digital) 0-300V DC, 0-9999 RPM Meter.
Power unit housed in metal cabinet, circuit 
diagram printed, connections ofvarious components
(SCR-6 No&'s & freewheeling Diode) & test points
brought out at Bakelite front panel
For more details please refer datasheet.

Product Overview

To study DC fan speed control using PWM & MOSFET. 
To study light intensity control using PWM & IGBT.
To study AC fan speed control using TRIAC & DIAC.
To study temperature control using comparator & BJT.
To study light intensity control using SCR & R triggering.
To study light activated solid state switch
Output voltage
: 12V DC (internally connected)
: 220V AC (with 'ON/OFF' switch to drive the circuit)
For more details please refer datasheet.

Product Overview

To study application of Thyristors (SCR, MOSFET,
IGBT, UJT, PUT, DIAC & TRIAC)
DC Power Supply : ±5V/500mA, ±12V/500mA, 15V/250mA
                : +35V/250mA
AC Power Supply: 18-0-18V AC, 15V AC
On board triggering circuit with frequency, PWM 
& duty cycle control.
On board single phase rectifier firing circuit 
with firing angle control. 
For more details please refer datasheet.

Product Overview

To control phase angle by Triac & observe 
the wave form on CRO.
In built Sine wave Oscillator of 15V pp/ 1KHz
On board control for phase angle.
TRIAC BT 136 used.
Circuit diagram printed on front panel & test 
points brought out on front panel.
Power requirement: 230 VAC +10%, 50Hz.
Patch Cords, Instruction Manua
For more details please refer datasheet.

Product Overview

To Study the Switching of Action of a BJT 
& Observe the output on LED.
In built fixed power supply +18VDC/200mA
Two NPN transistor BC 547 used.
One dual range analog voltmeter (0-1/10VDC)
8.2V zener diode used .
Circuit diagram printed on front panel &
test points brought out on front panel.
Power requirement: 230 VAC +10%, 50Hz.
Patch cords & Instruction Manual
For more details please refer datasheet.
 

Product Overview

Thyristor Firing Circuit Kit Design to 
introduce time delay using UJT & Observe
output on LED.
In built fixed power supply +12VDC/250mA
UJT 2646, SCR 2P4M based circuit.
For variable time delay following resistance
& capacitance values
i) Resistance-10K, 50K-500K,
ii) Capacitance - 1mF, 47mF, 1mF, 10mF-470mF
For more details please refer datasheet.

Product Overview

Designed to convert line frequency to 1/2,1/3
& 1/4 of its value & observe the wave form on CRO
Power supply +9volt DC for reference.
In built IC based DC regulated power supply +5VDC.
Three separate supplies V1, V2 and V3 of +5Volt 
DC each for opto isolators (MCT2E).
Built in clock generator.
Frequency selection switch for selecting frequencies
of 25Hz, 16.66 & 12.5Hz.
For more details please refer datasheet.

Product Overview

Switched Mode Power Supply (SMPS) using high frequency 
transformer & high switching transistor has been designed
to study the line and load regulation characteristics of
SMPS power supplies.
Study of AC to DC Convertor.
Measurement of DC output using multimeter.
Study of DC filteration.
Measurement of filtered DC output.
Study of control of output DC voltage.
For more details please refer datasheet.
 

Product Overview

To study the working Jone’s Chopper 
& observe various waveforms on CRO
Power supply of +25VDC.
On board frequency and duty cycle controls.
On board lamp holder.
Circuit diagram printed on front panel
& hyristors “TYN 612” & “2P4M”
test points brought out on front panel.
Power requirement: 230 VAC +10%, 50Hz.
For more details please refer datasheet.

Product Overview

To Study the Working of Morgan Chopper 
& Observe various waveforms on CRO.
In built power supply of range +15V DC / 200mA.
One number of Digital Panel Meter for voltage
measurement of range 0-20V.
One number of Digital Panel Meter for current
measurement of range 0-2A.
Selector Switch for selecting capacitance of 
different values i.e. 10mF, 20mF and 30mF.
For more details please refer datasheet.

Product Overview

To Study the Conversion of DC To AC 
by use of Series Inverter
Power supply of +40VDC/3Amps.
On board frequency controls.
On board lamp holder.
Circuit diagram printed on front panel two thyristors 
“TYN 612” & one
UJT “2646” & test points brought out on front panel. 
Power requirement: 230 VAC +10%, 50Hz.
For more details please refer datasheet.

Product Overview

High quality standard laboratory tool to fulfill
the requirement of different values of standard
capacitance
Dial range : Four Dials of 0.001, 0.01, 0.1, 1microF
Total range : 0.001 ~ 11.11microF
Housed in plastic molded box
Working Voltage : 250V
Capacitance Type : Polyester & Paper Type
Accuracy : +1.5%
For more details please refer datasheet.

Product Overview

High quality standard laboratory tool to fulfill 
the requirement of different values of standard 
inductance
Each dial consisting of 10 steps
Housed in plastic molded box
Inductance Type : Copper wound air core type
Accuracy : +2%
Dial range : Two Dials of 1, 10mH
Total range : 1 ~ 110mH
For more details please refer datasheet.

Product Overview

High quality standard laboratory tool to fulfill
the requirement of different values of standard
resistance
Each dial consisting of 10 steps
Housed in plastic molded box
Resistance Type: Metal Film Resistance(MFR),0.5 Watt
Accuracy : +1.5%
Dial range : Two Dials of 1, 10mH
Total range : 1 ~ 110mH
For more details please refer datasheet.

Product Overview

The instrument has been designed to study 
voltage gain, frequency response & Effect of 
negative feedback of first stage, secondstage,
RC coupled & Direct coupled amplifier.
Output voltage (Regulated): -12VDC 
Housed in PVC cabinet, circuit diagram printed,
connections of 2 Nos. 
of PNP Transistor, Potentiometer, Biasing Resistance,
Capacitors & test points out at Bakelite front panel.
For more details please refer datasheet.

Product Overview

The instrument has been designed to study the 
output voltage gain & frequency response of an 
audio power amplifier using IC TBA810. 
Inbuilt Fixed DC Regulated Power Supply
Output Voltages : 6VDC
IC & Components Provided :
IC : TBA810
Resistances
Capacitors
For more details please refer datasheet.

Product Overview

Darlington Pair Amplifier has been designed
to study the following :
A. Output Voltage Gain.
B. Output Impedance.
C. Output Power.
Inbuilt Fixed DC Regulated Power Supply
Output Voltages: 12VDC
Transistor , Potentiometer & Components Provided
Transistors: CL100 (NPN) .
Potentiometer: To measure the Input/Output impedance.
For more details please refer datasheet.

Product Overview

Transistor Amplifier Circuits has been designed to 
plot the frequency response and to measure the following:
A. EffectofFeed-Back onoutputinCommonBase&CommonEmitter 
Amplifier.
B. Input Impedance
C. Output Impedance
D. Band Width
E. Gain
Inbuilt Fixed DC Regulated Power Supply
Output Voltages : 12VDC
For more details please refer datasheet.

Product Overview

Push-Pull Amplifier Apparatus has been designed 
to study the Output Gain, Output Power and Frequency
Response of a Push Pull Amplifier. 
Transistor : CL-100 (NPN) 3 Nos
Potentiometer : 1 Nos.
Biasing Resistances
Capacitors
SPDTSwitch
Power requirement : 230 VAC 10%, 50Hz
For more details please refer datasheet.

Product Overview

Complementary Symmetry Amplifier has been designed 
to study the frequency response, output gain and 
output power of a Complementary Symmetry Amplifier
Inbuilt Fixed DC Regulated Power Supply
Output Voltages : 12VDC
Symbol diagram printed on Aluminum Front Panel & all 
important test Points Are brought out on front panel
Power requirement : 230 VAC 10%, 50Hz
For more details please refer datasheet.

Product Overview

IFTAmplifier has been designed for study 
the IFTAmplifier
Inbuilt Fixed DC Regulated Power Supply
Output Voltages : 15VDC
Inbuilt IFTAmplifier circuit
High quality Aluminum used as front panel of 
270 mm x 170mm & mounted on
light weight shock proof plastic cabinet
Power requirement : 230 VAC 10%, 50Hz.
For more details please refer datasheet.

Product Overview

FETCommon Source Amplifier has been designed to study
the Voltage Gain, Input Impedance, Output Impedance 
& Frequency Response of a Common Source FETAmplifier
Inbuilt Fixed DC Regulated Power Supply
Output Voltages : 15VDC
Components Provided
FET : BFW 10
Biasing Resistances
Capacitors
For more details please refer datasheet.

Product Overview

Common Base Transistor Amplifier apparatus with
and without Negative Feed Back has been designed 
to study the following :-
A. Frequency Response / Output Voltage Gain.
B. Input Impedance.
C. Output Impedance.
D. Effect of Negative Feed Back on Output Gain.
Inbuilt Fixed DC Regulated Power Supply
Output Voltages : - 12VDC
For more details please refer datasheet.
 

Product Overview

Biasing of Transistor as Class "A" Amplifier
apparatus has been designed to study the Frequency
Response with change of Biasing Resistance RE & RL.
Inbuilt Fixed DC Regulated Power Supplies
Output Voltages : 12VDC
                           : 18VDC
Components Provided
Resistances
Capacitors
SPDTSwitch
For more details please refer datasheet.

Product Overview

Kit for IC 555 Timer circuit applications 
has been designed to perform the
following experiments:-
A. Astable Multivibrator
B. Monostable Multivibrator
C. Bistable Multivibrator
D. Voltage to Time convertor/Voltage to Frequency convertor
Inbuilt Fixed DC Regulated Power Supply
Output Voltages : +5VDC
For more details please refer datasheet.

Product Overview

Used To calculate the unknown value of Frequency
Panel with two ratio dial with ranges X1 ,10 ,100
,1000 marked with R3 & R4.
Two decade dials X0.01,0.1µF for capacitance marked C1.
Three decade dials X10, 100, 1000 marked R1.
Three decade dials X1, 10, 100 marked R2
Terminals are provided for capacitance C2, AC Supply, 
detector as head phone/CRO
Sensitive Head phone(ME -2219)
For more details please refer datasheet.
 

Product Overview

Used To calculate the unknown value of resistance
Series Arm: Four decade dial in steps of 1000,100,10,1 .
Ratio Arm : The ratio arm of bridge are capable of Selecting
multiplying factor of 0.001, 0.01, 0.1, 1, 10, 100,1000 for resistance
measurement & varley loop test & ratio M10, M100, M 1 0 0 0 f o r
Murray loop test.
One selectable switch with option for Murray (M) loop & For
resistance/ Varley (VR) loop test.
One galvanometer fitted inside the box with option of external or
internal galvanometer with terminal .
For more details please refer datasheet.

Product Overview

Used To calculate the unknown value of Inductance
Three decade dials of X0.01 , 0.1 , 1 marked ‘r’
Three decade dials X 10 ,100 , 1000 marked R3
Three decade dials X 10 ,100 ,1000 marked R4.
Sockets are provided for connection of standard inductance,
unknown inductance, sine
wave oscillator and for detector as head phone/CRO.
Optional Accessories
Decade Inductance Box with Sine Wave Oscillator & Inductance
For more details please refer datasheet.

Product Overview

Used To calculate the unknown value of capacitance.
Technical Specifications
Panel with two ratio dial X 0. 1 , 1 marked R.
Four decade dials X 0.1 ,1 ,10 , 100 marked R1
Four decade dials X 0.1 ,1 ,10 , 100 marked R2Optional Accessories
1) Decade Capacitance Box with Sine Wave Oscillator & Inductance
(ME -2200A)
2) Sensitive Head Phone (Detector)(ME -2219)
For more details please refer datasheet.
 

Product Overview

Used To calculate the value of unknown Inductance 
in terms of Capacity and Resistance.
Panel with two ratio dial each having 10W,100W, 
1000 W coil marked ‘P’ and ‘Q’
• Three decade dials X 10 ,100 ,1000 marked ‘R’.
• Four decade dials X 1 ,10 ,100 and 1000 in series
with inductance “ L” coil marked ‘S’.
• Three decade dials X 1 ,10 ,100 marked ‘r’.
• Terminals provided for condenser, inductance, AC supply 
& head phone/CRO.
For more details please refer datasheet.

Product Overview

Used To measure the low value Resistance.
Multiplier dial is provided on the front panel
with ranges X 0.01 , X0.1 , X1 ,X10 , X100 .
Standard resistance dial & slide wire dial 
are also provided on the front panel.
Two press keys are provided on the front panel 
marked as coarse and fine.
Current reversing switch is provided on the front 
panel to get the deflection on left or right Hand 
side in a galvanometer.
For more details please refer datasheet.

Product Overview

Used To calculate the value of inductance (500mH - 100mH)
in term of Capacitance & resistance.
In built fixed DC regulated power supply of ±5V±12V & +5V/
500mA.
Inbuilt sine wave oscillator, frequency 1KHz ±3%, amplitude 0-
15Vpp.
In built 3½ digit digital null detector used as detector
On Board three set of two decade dial x(10 W & 100W).
On Board four unknown inductance & two standard capacitor are
For more details please refer datasheet.

Product Overview

Used To calculate the value of capacitor (0.01mF - 1mF).
In built fixed DC regulated power supply of ±5V ±12V & +5V/
500mA.
Inbuilt sine wave oscillator, frequency 1KHz ±3%, amplitude 0-
15Vpp.
In built 3½ digit digital null detector used as detector.
On Board two ratio dial “P” & “Q” each having 10 W,100W &
1000W
On Board two decade dial x (0.01 mF & 0.01mF).
For more details please refer datasheet.

Product Overview

Used To calculate the value of inductance (500mH - 10mH).
In built fixed DC regulated power supply of ±5V, ±12V & 55V/
500mA.
Inbuilt sine wave oscillator, frequency 1KHz ±3%, amplitude 0-
15Vpp.
In built 3½ digit digital null detector used as detector
On Board two set of two decade dial x(100W & 1000W).
On Board four unknown inductance are mounted behind the
front panel with connections are brought out on front panel.
For more details please refer datasheet.

Product Overview

Used To calculate the value of capacitor (0.033 mF - 1mF).
In built fixed DC regulated power supply of ±5V , ±12V & +5V/
500mA.
Inbuilt sine wave oscillator, frequency 1KHz ±3%, amplitude 0-
15Vpp.
In built 3½ digit digital null detector used as detector
On Board two set of two decade dial x(1W & 10W).
On Board six unknown capacitor & two capacitor (0.033mF &
1mF) are mounted behind the front panel with connections are
brought out on front panel
For more details please refer datasheet.

Product Overview

Used To calculate the value of frequency (500Hz - 100KHz)
In built fixed DC regulated power supply of ±5V & +5V/ 500mA.
In built 3½ digit digital null detector used as detector
On Board two set of two decade dial x(0.01mF& 0.1mF).
On Board three decade dial x(10 W , 100W & 1000W).
On Board three decade dial x(1W , 10W & 100W).
Bakelite used as front panel of 400mm x 225mm & mounted on
light weight shock proof plastic cabinet
Power requirement : 220 VAC +10%, 50Hz
For more details please refer datasheet.

Product Overview

Used To calculate the value of unknown capacitor 
(0.047mF - 1mF) in term of capacitance.
In built fixed DC regulated power supply of ±5V, ±12V & +5V/
500mA.
Inbuilt sine wave oscillator, frequency 1KHz ±3%, amplitude 0-
15Vpp.
In built 3½ digit digital null detector used as detector
On Board two set of two decade dial x(10W & 100W).
On Board one decade dial x(0.1mF).
For more details please refer datasheet.

Product Overview

Used To calculate the value of unknown inductance (20mH - 100mH).
In built fixed DC regulated power supply of ±5V, ±12V & +5V/
500mA.
Inbuilt sine wave oscillator, frequency 1KHz ±3%, amplitude 0-
15Vpp.
In built 3½ digit digital null detector used as detector
On Board two decade dial x(100 W & 1000W).
On Board three decade dial x(10W, 100W & 1000W).
On Board two decade dial x (0.01mF & 0.1mF).
For more details please refer datasheet.
 

Product Overview

Delta, Adaptive Delta & Delta Sigma Modulation & Demodulation
To study and observe waveforms of Delta, Adaptive
delta, Delta sigma modulation & demodulation circuits.
To study Amplitude overload in delta sigma modulation.
Output voltage (Regulated): +12V DC & 5V DC (Inbuilt)
Sampling clock frequency: 32KHz, 64KHz, 128KHz & 256KHz
                                          : 5V P-PApprox.
Crystal frequency: 4.096MHz
Sine wave generator: 250Hz, 500Hz, 1KHz, 2KHz,
For more details please refer datasheet.

Product Overview

TDM Pulse Code Modulation Receiver
Observe Time Division Demultiplexing
of PCM data.
Clock regeneration by PLL & signal
recovery in 3 connecting modes
between Transmitter and Receiver.
Clock and frame synchronization in PCM 
system & effect of various faults.
For more details please refer datasheet.
 

Product Overview

TDM Pulse Code Modulation Transmitter
Observe Pulse Code Modulation, Analog to
Digital Convertor parallel to serial data
conversion, Time Division Multiplexing of 
PCM data & Error check codes
Output voltage (Regulated): ±12V DC, 5V DC (Inbuilt)
Sine wave generator : 1KHz& 2KHz/0-10VppApprox.
Variable DC level : + 5VDC(2Nos.)
Crystal frequency : 12MHz
For more details please refer datasheet.

Product Overview

Data Formatting & Carrier Modulation Transmitter
Conversion of NRZ data to other data formats NRZ 
(L), NRZ(M) RZ, AMI, RB, Biphase (Manchester),
Biphase (MARK), Differentially encoded dibit pair.
To study ASK, FSK, BPSK, DPSK, & QPSK carrier 
modulation techniques & their comparison.
Output voltages (Regulated): +12VDC & 5VDC (Inbuilt)
Input : 2 Channel Time Division Multiplexed
Data from ME 772 or ME 780.
For more details please refer datasheet.

Product Overview

Data Reformatting & Carrier Demodulation Receiver
Conversion of different data formats to NRZ data
formats ASK, FSK, BPSK, DPSK, & QPSK carrier 
demodulation techniques.
Output voltages (Regulated): ±12VDC, 5VDC (Inbuilt)
Output: 2 Channels TDM Multiplexed data stream
Demodulation: NRZ(M), RZ, AMI, RB, Biphase 
(Manchester), Options Biphase (MARK) Differentially
encoded dibit to NRZ (L)
For more details please refer datasheet.
 

Product Overview

Analog Signal Sampling & Reconstruction Trainer
Effect on amplitude of reconstructed signal by 
varying sampling pulse duty cycle in sample & 
sample/hold output.
Aliasing & effect on reconstruction of signal 
due to various sampling
frequencies, 2nd & 4th order butterworth filters
comparison & signal sampling and reconstruction 
using external sampling input.
For more details please refer datasheet.

Product Overview

DSB/SSB AM Transmitter Trainer
Study of carrier frequency generation, 
DSB & SSBAM Generation and transmission
& transmitter tuned circuit.
Output voltages (Regulated): ±12V, 5V/500mA 
Balanced Modulators : 455KHz, 1MHz with band 
Audio oscillator : 300Hz~3.4KHz/0-4VP-P
Transmitter amplifier output: DSB (1MHz), SSB 
(1.445MHz) (Gain adjustable) connected to cable
For more details please refer datasheet.

Product Overview

DSB/SSB AM Receiver Trainer
Study of DSB & SSB AM reception 
& detection by Diode /Product detector.
Study of Sensitivity, Selectivity & 
Fedelity of receiver.
Study of Automatic gain control (AGC) 
& Receiver tuned circuits.
Output voltage (Regulated): +12VDC (Inbuilt)
Receiving media: Telescopic Antenna/RF Cable
For more details please refer datasheet.
 

Product Overview

Transmission Line Trainer
Measurement of stationary wave, line
properties & line Attenuation. 
Measurement with matched, short, open
end of the line in pulsed condition, 
Frequency char. & input impedance of the Line.
Phase shift along the line & Fault localization 
within the line.
Transmission Line Coaxial cable: 100m (25 x 4)
Impedance Matching Resistance: 0-1002, 2 Nos.
For more details please refer datasheet.

Product Overview

Strain Gauge Trainer Kit (with Cantiliver Beam)
The instrument is designed to study the Strain Gauge
Transducer as a Direct Weighing machine's to obersve
the effectof weight on the strain or resistivity of 
the Strain Gauge.
DC Regulated Power Supply of for +12V Signal
Generationing circuit.
DC Regulated Power Supply for 5V.
For more details please refer datasheet.
 

Product Overview

LVDT Trainer Kit
To study input and Output characteristics,
Determination of Linear Range, Calibration
as displacement meter and to determine 
senstivity of the instruments, Phase shift 
on C.R.O.
Linear variable differential transform with 
± 10mm display acement.
On Board Digital Panel Meter with displacement Signal.
For more details please refer datasheet.

Product Overview

RTD Trainer Kit
To plot & Study the characteristics of RTD and to
measure temprature.
Transducer PT 100, signal conditioning circuit 
with exeitation source of constant current, power
supply of ± 5V DC display at 3½ digital panel meter
with resolution of 0.1ºC.
Beaker, Heating Rod, RTD (PT- 100), Thermometer
(0-100ºC)
For more details please refer datasheet.
 

Product Overview

Thermocouple Trainer Kit
It is precisely designed for application
in scientific industry to cater to the 
diverse requirements.
Supreme quality raw material and latest
machinery at our unit in sync with the 
prevailing industrial norms and standards.
To plot & Study the characteristics of 'K' 
type Thermol couple and to understand the 
concept of Thermocouple in instrumentation
For more details please refer datasheet.

Product Overview

Sensor Trainer Kit
To study working principle of different 
types of Sensors (transducers).
To study practical & Theoretical Aspects of
different types  Sensors (transducers). 
To study signal output & signal conditioning
circuitry different types Sensors (transducers). 
DC Regulated Power Supplies
+5VDC(fix) for LVDT,
+9VDC(fix) & +5VDC(fix) for Smoke Sensor Circuit
+5VDC(fix) for all DPMs.
For more details please refer datasheet.
 

Product Overview

Analog & Digital Lab Trainer (Bread Board Model)
Advanced lab trainer for students to perform more
than 100 experiments of analog & digital electronics
Compatible with optional ready to use experimental
modules.
Glass Epoxy PCB used as front panel & mounted on 
light weight shock proof Plastic cabinet
On board power supplies, Function generator,
and other input signals Bread board provided
For more details please refer datasheet.

Product Overview

Analog Lab Trainer (Bread Board Model)
Advanced lab trainer for students to perform
more than 50 experiments of analog electronics
Compatible with optional ready to use experimental
modules.
Glass Epoxy PCB used as front panel of 300mm x 220mm
& mounted on light weight shock proof plastic cabinet
On board power supplies, Function generator, and other
input signals Bread board provided
Supplied with connecting wires 
For more details please refer datasheet.

Product Overview

Digital Lab Trainer (Bread Board Model)
Advanced lab trainer for students to perform 
more than 50 experiments of digital electronics
Compatible with optional ready to use experimental
modules
Glass Epoxy PCB used as front panel of 300mm x 220mm 
& mounted on light weight shock proof plastic cabinet
On board power supplies, Function generator, and other
input signals
For more details please refer datasheet.

Product Overview

To verify bernoulli's theorem for the flow of real liquid
Hydraulic grade line & the total energy line along the 
flow section can be plotted & can be studied
Flow Channel: 265mm x 75mm x 75mm (LxBxH) made of clear
acrylic conduit
Diameter of Conduit(vary cross section): 22mm, 19mm, 16mm,
13mm, 16mm, 19mm, 22mm
Piezometer: 7 Nos. Placed equal spaced at 30mm mounted on 
graduated board
Constant Head Tank: 300mm x 300mm x 450mm (LxBxH)
Measuring Tank: 300mm x 300mm x 300mm (LxBxH)
Sump Tank: 600mm x 300mm x 300mm (LxBxH)
For more details please refer datasheet.

Product Overview

To determine the Reynold's number and hence
the type of flow from laminar to turbulent
To study transition zone
Tube: Clear acrylic 750mm length, 32mm outer dia. 
and 25mm inner dia
Dye Vessel: Made of material SS sheet, 1litrs capacity
Constant Head Tank: 300mm x 300mm x 450mm (LxBxH)
Measuring Tank: 300mm x 300mm x 300mm (LxBxH)
Sump Tank: 600mm x 300mm x 300mm (LxBxH)
Tanks made of SS sheet
Piping & Fittings: Gl material used
For more details please refer datasheet

Product Overview

To determine the co-efficient of discharge 
of different shape notches.
Notches (Made of Acrylic): a) V Notch
b) Rectangular Notch
c) Trapezoidal Notch
Hook Gauge: 30cm range with mounting provision.
Flow channel provided with constant head water 
arrangement with provision of notch replacement.
Flow Channel: 600mm x 250mm x 300mm (LxBxH)
Measuring Tank: 300mm x 300mm x 300mm (LxBxH)
Sump Tank: 600mm x 300mm x 300mm (LxBxH)
Piping & Fittings: Gl material used
For more details please refer datasheet.

Product Overview

To varify the momentum equation by impact 
of jet on different shapes
Target (3 Nos.) Made of Acrylic: 
a) Hemispherical cup 100mm dia
b) Flat plate 50mm dia
c) Inclined plate 45 degree
Nozzle (SS): 10mm dia, 75mm long
Weighing Scale: To measure jet force
Measuring Tank: 300mm x 300mm x 300mm (LxBxH)
Sump Tank: 600mm x 300mm x 300mm (LxBxH)
Tanks made of SS sheet
Piping & Fittings: Gl material used
For more details please refer datasheet.

Product Overview

To find the co-efficient of pitot tube
To find the point velocity at the center
of a tube for different flow rates
To plot velocity profile across the cross
section of pipe
Flow Channel: 200mm long made of clear acrylic 
conduit with attachment of pointer gauge.
Pressure Measurement: Provided "U" Tube differential
manometer for head loss measurement
Measuring Tank: 300mm x 300mm x 300mm (LxBxH)
Sump Tank: 600mm x 300mm x 300mm (LxBxH)
Tanks made of SS sheet
For more details please refer datasheet.

Product Overview

To find out discharge of usefull 
and waste water
To find out the efficiency of hydraulic ram
Overhead tank provided as delivery head for 
free fall water to ram
Pressure vessel provided to create pressure
upto 0.8kg/cm2
Ram piston made of SS, 15mm dia
Ram made of SS, 50mm dia
Pressure Gauge: 30psi
Overhead Tank: 300mm x 350mm x 1000mm
Water Reservoir Tank: 300mm x 200mm x 150mm (LxBxH)
Piping & Fittings: Gl material used
For more details please refer datasheet.

Product Overview

To determine the co-efficient of discharge 
of different orifice and mouth - pieces.
To determine the co-efficient of velocity & contraction
Orifices (2nos): Material clear acrylic dia.10mm and 15 mm
Mouthpieces (3nos): Material clear acrylic
a) Dia 10 mm (L/D = 1)
b) Dia 10 mm (L/D = 2.5)
c) Dia 12mm (L/D = 2.5)
Pointer Gauge: To measure X-Y co-ordinates of jet
Constant Head Tank: 300mm x 300mm x 450mm (LxBxH)
Measuring Tank: 300mm x 300mm x 300mm (LxBxH)
Sump Tank: 600mm x 300mm x 300mm (LxBxH
For more details please refer datasheet.

Product Overview

To determine co-efficient of discharge of orificemeter
Orificemeter: 265mm x 75mm x 75mm (LxBxH) made of clear
acrylic conduit
Diameter of Conduit: 25mm ID, centre point dia 13mm
Pressure Measurement: 'U' Tube differential manometer
Measuring Tank: 300mm x 300mm x 300mm (LxBxH)
Sump Tank: 600mm x 300mm x 300mm (LxBxH)
Tanks made of SS sheet
Pizometer tube with scale provided on all tanks for water
level measurement
Piping & Fittings: Gl material used
Valves: 2nos. for drain, 1no. for inlet water control, 1no. 
for bypass, 1no. outlet water control
For more details please refer datasheet.

Product Overview

To determine co-efficient of discharge of venturimete
Venturimeter: 265mm x 75mm x 75mm (LxBxH) made of clear
acrylic conduit
Diameter of Conduit(vary cross section): 13mm & 25mm
Pressure Measurement: 'U' Tube differential manometer
Measuring Tank: 300mm x 300mm x 300mm (LxBxH)
Sump Tank: 600mm x 300mm x 300mm (LxBxH)
Tanks made of SS sheet
Pizometer tube with scale provided on all tanks for water
level measurement
Pump: 0.5HP Single phase, 220VAC±10%
For more details please refer datasheet.

Product Overview

To determine co-efficient of discharge of venturimeter
To determine co-efficient of discharge of orificemeter
Venturimeter: 265mm x 75mm x 75mm (LxBxH) made of clear
acrylic conduit-Diameter of Conduit(cross section):13mm & 25mm
Pressure Measurement: 'U' Tube differential manometer
Measuring Tank: 300mm x 300mm x 300mm (LxBxH)
Sump Tank: 600mm x 300mm x 300mm (LxBxH)
Tanks made of SS sheet
Pizometer tube with scale provided on all tanks for water 
level measurement
Piping & Fittings: Gl material used
Pump: 0.5HP Single phase, 220VAC±10%
For more details please refer datasheet.

Product Overview

To determine co-efficient of discharge of nozzlemeter
Nozzlemeter: 265mm x 75mm x 75mm (LxBxH) made of clear
acrylic conduit
Diameter of Conduit: 25mm ID, centre point 13mm
Pressure Measurement: 'U' Tube differential manometer
Measuring Tank: 300mm x 300mm x 300mm (LxBxH)
Sump Tank: 600mm x 300mm x 300mm (LxBxH)
Tanks made of SS sheet
Pizometer tube with scale provided on all tanks for 
water level measurement
For more details please refer datasheet.
 

Product Overview

To determine the friction factor (Coefficient of 
discharge)for the 4 different material of pipes.
Pipe Line: Provided 4 nos. of different material 
1300mm long ID 15mm (Aluminum, Copper, Brass, GI)
Pressure Measurement: 'U' Tube differential manometer
Measuring Tank: 300mm x 300mm x 300mm (LxBxH)
Sump Tank: 600mm x 300mm x 300mm (LxBxH)
Tanks made of SS sheet
Piping & Fittings: Gl material used
Tee Handle Valve: 8nos.
Pump: 0.5HP Single phase, 220VAC±10%
For more details please refer datasheet.

Product Overview

To determine the friction factor for the pipes
Technical Specifications:
Pipe Line: Provided 2 nos. 1000mm long
12mm Diameter (Elbow Less, Bend Less)
12mm & 25mm Diameter (Sudden & Contraction)
Pressure Measurement:'U' Tube differential manometer
Measuring Tank: 300mm x 300mm x 300mm (LxBxH)
Sump Tank: 600mm x 300mm x 300mm (LxBxH)
Pizometer tube with scale provided on all tanks for 
water level measurement
Piping & Fittings: Gl material used
Pump: 0.5HP Single phase, 220VAC±10%
For more details please refer datasheet.

Product Overview

To find the surface profile in a free vortex flow
To find the surface and total head distribution in
a forced vortex flow
DC Motor: 1HP
DC Drive (Thyristorized Based): 2 Amps
Voltmeter: 0~220 VDC
Currentmeter: 0~10Amps
RPM Meter (PNP Type): 0~1500
Cylinder: 1no. made by acrylic pipe 600mm long,300mm dia
Provided with SS agitator for forced action
Sump Tank: 600mm x 300mm x 300mm (LxBxH)
For more details please refer datasheet.

Product Overview

To study piezometer tube for water level measurement
Capillary tube viscometer study
Tube: Clear acrylic 700mm length, 32mm outer dia.
Distance between piezometer tube: 500mm
Piezometer tube length: 450mm
Constant Head Tank: 300mm x 300mm x 450mm (LxBxH)
Sump Tank: 600mm x 300mm x 300mm (LxBxH)
Tanks made of SS sheet
Pizometer tube with scale provided on all 
tanks for water level measurement.
Piping & Fittings: Gl material used
Pump: 0.5HP Single phase, 220VAC±10%
For more details please refer datasheet.

Product Overview

To determination of the metacentric height 
and position of the metacentric height with 
angle of heel of ship model.
Ship Model: Size 200 x 200mm with a horizontal 
guide bar for aliding weight and removable strips, 
graduated arc with pointer with moveable hanger 
and set of weights
Pendulum and graduated arc for accurate measurement
of tilt angle
Water Tank: 600mm x 600mm x 300mm (LxBxH)
Tanks made of SS sheet
For more details please refer datasheet.

Product Overview

L shaped submerged body 100mm x 100mm x 200mm, 
leak proof made of
clear acrylic for better front view
Hanger Type: Made of aluminium for hanging weight
Water Tank: 300mm x 600mm x 300mm (LxBxH)
Tanks made of SS sheet
Valves: 1no. for drain
The whole set-up is well designed and arranged in a good 
quality painted structure made of square pipe 300mm x 600mm 
x 900mm (LxBxH)
Instruction manual, Set of weights
For more details please refer datasheet.

Product Overview

To study the friction in different pipes 
and different diameters
To determine the friction factor for Darcy 
- Weisbach equation
Pipe Line: 1" fitting with test section 3" diameter
Pipe Test Section: Length 600mm for 3" diameter
Pressure Measurement: 'U' Tube differential manometer
Measuring Tank: 300mm x 300mm x 300mm (LxBxH)
Sump Tank: 600mm x 300mm x 300mm (LxBxH)
Tanks made of SS sheet
Piping & Fittings: Gl material used
For more details please refer datasheet.

Product Overview

To find out flow rate of air through axial fan
Study the characteristics of air blower
Technical Specifications:
Air Flow Measurement Unit: 2000mm
Test Section: 1000mm
ID Test Section: 124mm & 72mm
OD Test Section: 127mm & 75mm
Orifice Diameter: 35mm
Energy Meter
RPM Meter (PNP Type): 0 ~ 1500
U-Tube manometer for air flow measurement
For more details please refer datasheet.

Product Overview

To determine total head, pump uutput, overall 
efficiency and pump efficiency of the centrifugal pump
To plot head vs discharge, pump efficiency vs discharge,
pump output vs discharge
Pump Capacity: 1HP
RPM: 2800
DC Motor: 1HP/3000RPM
DC Drive (Thyristorized Based): 2 Amps
Energy meter provided for energy measurement
Measuring Tank: 300mm x 300mm x 300mm (LxBxH)
Sump Tank: 600mm x 300mm x 300mm (LxBxH)
For more details please refer datasheet.

Product Overview

Study of centrifugal pump characteristics when
-Pumps are connected in series 
-Pumps are connected in parallel
Technical Specifications:
Pump Capacity: 1HP - 2nos.
Speed: 2800RPM
DC Motor: 1HP - 2nos.
DC Drive (Thyristorized Based): 2Amps
Voltmeter: 0~220VDC
Currentmeter: 0~10Amps
RPM Meter (PNP Type): 0~3000 - 2nos.
Energy meter provided for energy measurement
For more details please refer datasheet.

Product Overview

To find the efficiency of reciprocating pump
Reciprocating Pump type: Double acting cylinder
RPM: 320
DC Motor: 1HP
DC Drive (Thyristorized Based): 2 Amps
RPM Meter (PNP Type): 0~1500
Energy meter provided for energy measurement
Measuring Tank: 300mm x 300mm x 300mm (LxBxH)
Sump Tank: 600mm x 300mm x 300mm (LxBxH)
Tanks made of SS sheet
For more details please refer datasheet.

Product Overview

To study the operation of a francis turbine
To determine the output power of francis turbine
To determine the turbine efficiency
Supply Head: 10M
Rope brake arrangement with weighing balance
Drum Diameter: 200mm
Discharge measurement through pitot tube with manometer
Sump Tank 250lits: 700mm x 600mm x 600mm (LxBxH)
Tanks made of SS shee
Piping & Fittings: Gl material used
Valves: 1nos. for drain, 1no. for bypass, 1no
Pressure Gauge: 0~4Kg/cm²
For more details please refer datasheet.

Product Overview

To study the operation of a pelton wheel turbine
To determine the output power of pelton wheel turbine
To determine the turbine efficiency
Turbine Type: Pelton
Output Power: 1HP at 1000RPM (approx.)
Spoon: 16nos. Made of aluminium
Discharge: 400LPM Approx.
Supply Head: 25M
Spear and Nozzle: SS-304 (Material Used)
Rotor Shaft: Stainless steel
Jet pressure control through spear headed nozzel 
and screw handle arrangement
For more details please refer datasheet.

Product Overview

To study the operation of a kaplan turbine
To determine the output power of kaplan turbine
To determine the turbine efficiency
Turbine Type: Kaplan (Vertical shaft design)
Output Power: 1HP at 1500RPM
Propellor made of die cast iron
Discharge: 1000LPM
Supply Head: 8M
Rope brake arrangement with weighing balance
Drum Diameter: 200mm
Flow measurement through pitot tube with manometer
Sump Tank 250lits: 700mm x 600mm x 600mm (LxBxH)
For more details please refer datasheet.

Product Overview

To find out flow rate of air
Study the characteristics of air blower
Length of Test Section: 1000mm
ID of Test Section: 72mm
OD of Test Section: 75mm
Orifice Diameter: 35mm
Blower: 16no.
Orifice Pipe Inside Diameter: 72 mm
Dimmer state: 2Amps.
Voltmeter: 0~220VDC
Currentmeter: 0~20Amps
RPM Meter with PNP sensor
For more details please refer datasheet.

Product Overview

Transmission Line Trainer (ABCD, T & Pi parameters, 
Ferranti effect Load test)
"Control Panel To Study The Characterstic of A Transmission
Line (Combined for ABCD Parameter & TAnd Pie Network"
has been designed to study the ABCD Parameter of 
Transmission Line By T and Pie Network.
Compact and easy to use in electrical laboratories
Equipped with high safety features
Portable and easy to install
Elaborated instruction manual with calculated values
For more details please refer datasheet.

Product Overview

To study the construction of relay.
Test an induction disc relay in over current
protection scheme for operating characteristic
using current injection.
To obtain the time & current characteristics of
a over current induction disc type relay
Compact and easy to use in electrical laboratories
Equipped with high safety features
Portable and easy to install
Elaborated instruction manual with calculated values
For more details please refer datasheet.

Product Overview

To study the construction of relay
Test an induction disc relay in residual earth 
fault protection scheme for operating characteristic
and setting using current injection.
To obtain the time & current characteristics of a
earth fault relay induction disc type relay
Compact and easy to use in electrical laboratories
Equipped with high safety features
Portable and easy to install
Elaborated instruction manual with calculated values
Relay Type: Earth Fault Relay IDMT
Meters (Digital): 1No. AC Current Meter 0 20Amps & 1 No
For more details please refer datasheet.
 

Product Overview

Percentage Based Differential Relay Testing Kit
To study the construction of relay.
To check connections on biased differential 
protection scheme of transformer.
Test the scheme for operation and setting values 
on interval faults using current injection.
To obtain the current characteristics of a percentage
biased differential relay induction disc type.
Compact and easy to use in electrical laboratories.
Equipped with high safety features.
Portable and easy to install.
Elaborated instruction manual with calculated value.
For more details please refer datasheet.

Product Overview

To study the construction of relay
To check connections on biased differential 
protection scheme of transformer.
Test the scheme for operation and setting values
on interval faults using current injection.
To obtain the current characteristics of a percentage
biased differential relay Micro controller Based.
Compact and easy to use in electrical laboratories
Equipped with high safety features
Portable and easy to install
Elaborated instruction manual with calculated values
For more details please refer datasheet.

Product Overview

Thermal Over Load  Relay Testing Kit
To study the operating characteristics of relay
To study the time current characteristics of the
Thermal Overload Relay.
Relay Type: Percentage Biased Differential Relay 
(Electromechanical Induction Disc Type)
Terminals: 4mm Terminals for Rheostats to set the
biased Current & to vary the Differential Current.
Meters (Digital): 3Nos. AC Current Meter 0-20Amps
& 1 No. Digital Timer .0001sec. to 9999sec.
For more details please refer datasheet.
 

Product Overview

Buchholz Relay Testing Kit (with Compressor & Oil)
To study the alarm & trip function of buchholz relay
Compact and easy to use in electrical laboratories
Equipped with high safety features
Portable and easy to install
Elaborated instruction manual with calculated value
Part A (Testing Setup)
Relay Type, Fittings, Oil Tank, Control Valves, Mounting,
Air Inlet, Air Pump.
Part B (Control Panel)
Terminals, Protectio, Meters (Digital), Indicators, 
Dimensions, Weight, Power Requirement
For more details please refer datasheet.

Product Overview

To study the current rating and accuracy 
of CT's under test
To study the efficiency of CT under test
To compare CT under test w.r.t. standard CT
To study the Phase angle error, Percentage 
Ratio error, Time difference & Time period
CT Test Set
Burden Box
Current Injection Set
Current Transformer
Range:100: 5 Amps (2Nos)
For more details please refer datasheet.

Product Overview

Under Voltage/Over Voltage Relay Testing Kit 
To study the construction of relay.
Test an relay in over/under voltage protection
scheme for operating characteristic using voltage
injection.
To obtain the time & current characteristics of 
a over/under voltage type relay (Static).
Compact and easy to use in electrical laboratories
Equipped with high safety features
Portable and easy to install
Elaborated instruction manual with calculated values
For more details please refer datasheet.

Product Overview

Instantaneous Earth Fault Relay Testing Kit
To study the construction of relay
Test an relay in instantaneous protection scheme 
for operating characteristic using current injection.
Compact and easy to use in electrical laboratories
Equipped with high safety features
Portable and easy to install
Elaborated instruction manual with calculated values.
Relay Type: Instantaneous Earth Fault Relay 
Terminals: 4mm Terminals for Trip,Current Output and Input
For more details please refer datasheet.

Product Overview

Under/Over Frequency Relay Testing Kit
with MG set Shunt Motor 1HP coupled with 
0.5KVA Alternator for frequency variation
To study the construction of relay.
Test an relay in frequency protection scheme 
for operating characteristic using control 
frequency.
Compact and easy to use in electrical .
Equipped with high safety features.
Portable and easy to install.
Instruction manual with calculated values.
For more details please refer datasheet.
 

Product Overview

Over Voltage Relay Testing Kit (Electromechanical Type)
To study the construction of relay
Test an relay in frequency protection scheme 
for operating characteristic using Voltage Injection
To obtain the time & voltage characteristics of
a over voltage induction disc type relay
Compact and easy to use in electrical .
Equipped with high safety features.
Portable and easy to install.
Instruction manual with calculated values.
For more details please refer datasheet.

Product Overview

Under Voltage Relay Testing Kit (Electromechanical Type)
To study the construction of relay
Test an relay in under voltage protection scheme 
for operating characteristic using voltage injection
To obtain the time & voltage characteristics of a 
under voltage induction disc type relay
Compact and easy to use in electrical laboratories
Equipped with high safety features
Portable and easy to install
Elaborated instruction manual with calculated values
For more details please refer datasheet.

Product Overview

Over Current & Earth Fault Relay Testing Kit 
(Three Phase Static Type)
To study the construction of relay.
Test an relay in under voltage protection scheme 
for operating characteristic using voltage injection.
Relay Type:Over Current & Earth Fault Relay Testing Kit 
(Three Phase Static Type)
Terminals: 4mm Terminals for Current Output and Input
Meters (Digital):1No. AC Current Meter 0-20Amps & 1 Nc. 
Digital Timer 0001sec. to 9999sec. (Auto) (96mm x 48 mm)
Inbuilt variable current injector 20Amps to create
For more details please refer datasheet.
 

Product Overview

Over Current Relay (Directional Type) 
Testing Kit (Electromechanical Type with Rheostat)
To study the construction of relay.
Test an relay in under voltage protection scheme 
for operating characteristic using voltage injection.
To obtain the time & current characteristics of a
directional over current Induction disc type relay
Terminals: 4mm Terminals for Trip, Current Output and Input
Meters (Digital): 1No. AC Current Meter 0-20Amps & 1 No.
Digital Timer 0001sec. to 9999sec. (Auto) (96mm x 48 mm)
For more details please refer datasheet.

Product Overview

Negative Sequence Relay Testing Kit 
(With 3 phase Induction Motor)
Relay Type: Negative Sequence Relay (Static Type)
Terminals: 4mm Terminals for Input & output Supply
Meters (Digital): 3Nos. AC Current Meter 0-20Amps 
& 1 No. Digital Timer 0001sec. To 9999sec. (Auto)
Indicators: Provided on front panel for Mains, 
Current, Trip, Alarm & motor on
Switches: Provided on front panel for Mains, 
Timer Reset, Test Switch (ON/OFF) & Fault Switch.
Relay Circuit Diagram: Screen Printed on 

Product Overview

Reverse Power Relay Testing Kit (Static Type)
Relay Type : Reverse Power Relay (Static Type)-2 Nos.
Meters (Digital): 2Nos. AC Current Meter 0-20Amps 
& 2 No. Digital Timer.0001sec. to 9999sec. (Auto) 
Terminals: 4mm Terminals for Current Output and Input
Current Injector: Inbuilt variable current injector 
20Amps to create Phantom Fault Current
Indicators: Provided on front panel for Current, 
Trip & Alarm
Switches: Provided on front panel for Mains,
Timer Reset, Test Switch (ON/OFF)
For more details please refer datasheet.

Product Overview

Planck's Constant Apparatus using Photocell
To determine Planck's constant using vacuum photocell
Output voltages (Regulated): 0-1V DC
Meters (Digital) : 0-2 V DC, 0-200uA DC
Power supply & digital meters housed in metal cabinet 
& connections of all important outputs brought out at
Bakelite front panel. 
Power Requirement: 220 VAC ±10%, 50Hz
One wooden plank with 1½ Meter scale, filters, suitable
light source, patch chords & instruction manual
For more details please refer datasheet.

Product Overview

Energy Band Gap by Four Probe Method
Energy band gap of Semiconductor material 
(Ge Crystal) By four probe method.
Power supply unit is housed in metal cabinet
and comprises of constant current generator 
0-20mA, Oven Power Supply & built in Digital
Voltmeter of 0-200mV/2V DC.
Probes Arrangement: 
It has four individually spring loaded, coated 
with Zn at the tips.
The probes are collinear and equally spaced. 
For more details please refer datasheet.

Product Overview

Energy Band Gap by Four Probe Method with PC Interface
'MARS' made Four Probe Apparatus with Data Logging & PC
interface has been designed to measure the value of 
forbidden energy band gap in germanium material.
Experiment consists of the following:
Probes Arrangement:
It has four individually spring loaded, coated with Zn at 
the tips. The probes are collinear and equally spaced. 
The Zn coating & individual spring ensure good electrical
contacts with the sample.
For more details please refer datasheet.

Product Overview

Measurement of High Resistance using Substitution Method
High resistance measurement using substitution 
method hasbeen designed to calculate the value
of unknown high resistance by using substitution 
method.
Output voltages: 0-8VDC
Meter (Analog) : Voltmeter 0-8V DC
                         : Galvanometer 30-0-30
Housed in PVC cabinet, circuit diagram printed
& all important output brought out at Aluminum front panel.
Power Requirement: 220 VAC ±10%, 50Hz
For more details please refer datasheet.

Product Overview

Lissajous Figure Apparatus has been designed 
to study the various Lissajous figures when
sine wave signals of same frequency differs 
in phase.
Housed in PVC cabinet, circuit diagram printed 
& all important output brought out at Aluminum 
front panel.
Power Requirement: 220 VAC ±10%, 50Hz
Standard Accessories:
Power Cords, Patch Cords, Instruction Manual
For more details please refer datasheet.

Product Overview

"Dielectric Constant Apparatus" has been 
designed for determines the Dielectric 
constant of a substance. (Liquid & Solid)
Setup Consist of:
Dielectric Constant Apparatus. 
Variable Gang Capacitor.
One Solid Bakelite plate to be insert in rap
of test capacitor.
Meter (Analog) : Ammeter 0-50 MicroA
Power Requirement: 220 VAC ±10%, 50Hz
For more details please refer datasheet.

Product Overview

To calculate the value of Hall coefficient (R),
Carrier Density (n) and carrier mobility.
Setup Consist of:
Hall Probe (Ge Crystal)
Hall Effect Set-up (Digital)
Electromagnet
Constant Current Power Supply
Hall Probe (Ge Crystal):
Contacts : Spring type (Solid Silver)
Hall Voltage :0.1-1 Volt/100 mA/KG
Resistivity :~=10 Ohm cm
For more details please refer datasheet.

Product Overview

Hall Effect Experimental Setup (Pc Based)
Setup Consist of Following:
Hall Probe (Ge Crystal)
Hall Effect Set-up (MCU Based) Consist of following:
a) Digital Voltmeter (display on LCD)
b) Constant Current Power Supply (display on LCD)
c) Digital Gauss Meter (display on LCD)
Electromagnet
Constant Current Power Supply
For more details please refer datasheet.

Product Overview

Fourier Analysis Kit is used to Analyse 
various Complex Signals.
Technical Specifications:
Output voltages : 6-0-6 VDC
Inbuilt Function Generator: 500Hz-1KHz
Housed in PVC cabinet, circuit diagram 
printed & all important output brought 
out at front panel.
Power Requirement: 220 VAC ±10%, 50Hz
Standard Accessories:
Power Cords, Patch Cords, Instruction Manual
For more details please refer datasheet.
 

Product Overview

Measurement of susceptibility of magnetic 
substance solution by quincke's method
Setup Consist of:
Quinck's tube with stand
• Sample: MnSO4, H2O or feCl3
• Specific gravity bottle: 25cc or 10cc
• Travelling Microscope
• Electromagnet
For more details please refer datasheet.
 

Product Overview

Inductance Measurement is designed to measure 
the Self Inductance of Coil Impedance at different
frequencies
Housed in PVC cabinet, circuit diagram printed, 
Band Switches, Resistance, Inductance & all
important cutput brought out at Aluminum front panel.
Power Requirement: 220 VAC ±10%, 50Hz
Standard Accessories:
Power Cords, Patch Cords, Instruction Manual.
For more details please refer datasheet.

Product Overview

To determine a High Resistance by the Method
of leakage of a Capacitor.
Setup Consist of:
Billistic galvanometer with lamp and scale arrangement
Capacitor: 0.47 Microfarad Approx.
High resistance : 20 Mega ohm Approx.
Battery Eliminator: 2-12V DC/2 Amps
Morse key, Typing key, Two way key & One way key
Standard Accessories:
Power Cords, Patch Cords, Instruction Manual.
For more details please refer datasheet.
 

Product Overview

Thermo Electric E.M.F. with Temperature for a 
Copper Iron Thermocouple by means of a Potentiometer
(Complete Setup)
To draw the calibration curve of the thermocouple, 
using potentiometer arrangement and hence to determine
the thermo electric power of the thermo couple at 
a certain temperature.
Setup comprises of:
Thermocouple : Copper constrain (with stand)
Potentiometer : 10 wire Potetiometer
Electronic standard cell: 1.018V DC
For more details please refer datasheet.

Product Overview

To Calibrate a given Voltmeter of 1 Volt
range by means of a Potentiometer.
Setup comprises of:
Potentiometer : 10 wire Potetiometer
Battery Eliminator: 2-12V DC/2 Amps (ME 202)
Fixed DC Power Supply: 2V/1A +6V/1A+1.018V (ME 143)
Rheostats : 100 ohm/1A (2Nos.)
Galvanometer : 1μA/div
Voltmeter :0-1V DC
Two way key
DC connecting wire: 3 Meter
For more details please refer datasheet.

Product Overview

To determine the Horizontal Component
(BH) of the Earth's Field.
Setup Consist of:
Graduated Compass
Current carrying coil (Tangent galvanometer)
Rheostat: 100 ohm/1Amp
Power Supply :0-12V DC/1 Amps
DC milliammeter : 500 mA
Switch for changing direction of current 
DC connecting wires: 2 Meters
For more details please refer datasheet.

Product Overview

To study the variation of Magnetic Field 
due to a circular coil with distance along
the Axis & Verification of Biot-Savart Law
Setup comprises of:
Stewart and Gee's apparatus
Power supply :0-12V DC/1 Amps
Compass Box
Reversing key (commutator)
DC Connecting Wire: 2 Meters
For more details please refer datasheet.

Product Overview

To Determine the Wavelength of a 
Monochromatic source of Light with
the help of Fresnel's Biprism.
Setup comprises of:
Optical bench : 1.0 Meters (Full Shaper)
Biprism : 50mm x 40mm with biprism moveable holder
Adjustable slit
Micrometer eye-piece: Least count 0.01mm
Convex lens : Focal length 10cm (with lens holder
For more details please refer datasheet.

Product Overview

To find the wavelength of white light 
with the help of a plane transmission 
diffraction Grating
Setup comprises of:
Diffraction Grating: 15000 lines/inch
Spectrometer : 6 Inch, Least Count - 30 Sec.
Light Source : 80 Watt Mercury vapour lamp
housed in powder coated Steel cabinet with
Transformer & Stand
For more details please refer datasheet.

Product Overview

To find the specific rotation of sugar
solution by using a polarimeter
Setup Consist of:
Spectrometer : 6 Inch, Least Count - 30 Sec.
Hydrogen discharge tube with supply
Diffraction grating : 15000 lines/inch
For more details please refer datasheet.

Product Overview

To find the wavelength of sodium light by Newton's Ring
Setup comprises of:
A Plano convex lens of large radius of curvature and plane
circular glass plate
Travelling Microscope: Newton's rings Travelling Microscope
                     : Least Count - 0.01mm
                     : Scale - 22cm
Light Source: 35 Watt Sodium vapour lamp housed in powder 
coated Steel cabinet with Transformer & Stand
Plane glass plate inclined at 45 degree arrangement
(in case of compact arrangement, angle varies according to choice)
For more details please refer datasheet.

Product Overview

To determine the thickness of a thin paper 
by interference of light in a wedge shaped film.
Setup Consist of:
Microscope: Newton's Travelling microscope 
arrangement to observe fringes
Light Source: 35 Watt Sodium vapour lamp  
housed in powder coated Steel cabinet with 
Transformer & Stand
Two optically plane glass plates
For more details please refer datasheet.

Product Overview

Determine the Velocity of Ultrasonic Waves 
by using a Crystal (Complete Setup)
Objective:
To study the diffraction of light due to 
propagation of ultrasonic wave in a liquid.
To determine the speed of sound in various 
liquids at room temperature
To determine the compressibility of the
given liquids
For more details please refer datasheet.

Product Overview

To find wavelength and angular divergence
of Diode laser.
Setup comprises of:
Monochromatic Light Source: Diode Laser (Power 5mW)
Optical bench : 1.5 Meter (Full Shaper)
Diffraction grating: 500lines/inch with grating holder
White screen
For more details please refer datasheet.

Product Overview

To determine the resolving power of a prism 
Setup consist of.
Spectrometer:6 Inch, Least count - 30 Sec.
Light Source: 80 Watt Mercury vapour lamp 
housed in powder coated Steel cabinet with 
Transformer & Stand
Prism: Crown Glass (base 3.2cm)
Micrometer slit: Least count - 0.01mm (with
A rectangular adjustable slit
For more details please refer datasheet.
 

Product Overview

To measure the wavelength of light (sodium vapour lamp)
source using Michelson's interferometer.
Setup comprises of:
Light Source:35 Watt Sodium vapour lamp housed in
powder coated Steel cabinet with Transformer & Stand
Michelson's interferometer
1) Pin hole in a black aluminium disc.
2) Glass diffuser disc.
7) Fine movement - Least count 10-4mm.
8) Telescope - It is a short focal length telescope with 
rack and pinion arrangement to be mounted on a rod fitted
in the instrument.
For more details please refer datasheet.

Product Overview

Determine the refractive index of a liquid 
by total internal reflection using Wollaston's air-film.
Setup consist of:
Spectrometer : 6 Inch, Least count - 30 Sec.
Light Source: 80 Watt Mercury vapour lamp housed 
in powder coated Steel cabinet with
Transformer & Stand
Air cell consisting of a thin layer of air enclosed 
between two glass plates.
Glass container.
Thermometer :-10 to 110 Degree C
For more details please refer datasheet.

Product Overview

To determine the thermal conductivity of a good
conductor by Searle's method.
Setup Consist of:
Searle's set-up
Thermometer :-10 to 110 Degree C (2 Nos.)
                        : Sensitive Thermometer Least
                         count -0.1Deg.C (2 Nos.)
Steam boiler
Stop watch : Least count - 0.01 Sec
Vernier caliper : Least count -0.01cm
Range: 15cm
For more details please refer datasheet.

Product Overview

Determine the modulus of rigidity of material 
of wire/rod by statical method using Barton's 
apparatus
Setup Consist of
Barton's apparatus
Weights:5 kg
Screw gauge: Least count - 0.01mm
Vernier caliper: Least count -0.01cm 
Range :15cm
Measuring tape: 3 Meters
For more details please refer datasheet.

Product Overview

Determine the modulus of rigidity of the 
materialof the given wire and moment of 
inertia of an irregular body with the help 
of a torsion table
Setup Consist of:
Inertia Table with wall clamp
Irregular body and regular body
Stop watch: Least count - 0.01 Sec
Vernier caliper: Least count -0.01cm
Range :15cm
Screw gauge: Least count -0.01mm
Measuring tape: 3 Meters
For more details please refer datasheet.

Product Overview

Determine g and velocity for freely falling
body using digital timing techniques
Setup Consist of:
Rod on stand : 50 cm
One coil circuit & one gate circuit with 
iron sphere of radius 0.5cm to 1.0cm
Digital Timer : Least count -0.001 Sec
Patch chord 4 mm (4 Nos.)
For more details please refer datasheet.

Product Overview

Determine the surface tension of a liquid 
(water) by Jaeger's method.
Setup Consist of:
Jaeger's apparatus
Beaker: 500ml
Thermometer:-10 to 110 Degree C
Optional: Travelling Microscope & Metallic
scale 30cm
For more details please refer datasheet.

Product Overview

Adiabatic Gas Law Apparatus (Mechanical unit)
The apparatus enables the user to investigate 
the comparison and expansion of gases under near
adiabatic condition / isothermal condition.
Work Space (Height): 70mm
Metallic Cylinder: 40mm diameter
Compression air jig with paddle compressor
Dimension LXBXH: 300x310x500
Power Requirement: 230V AC ±10% 50Hz
Advance PIC Microcontroller based data 
condition Circuit
For more details please refer datasheet.

Product Overview

To determine the thermal conductivity of a 
nonmetallic solid (bad conductor) by Lee's 
disc method.
Setup Consist of:
Lee's apparatus
Steam boiler
Hot plate
Thermometer :-10 to 110 Degree C (2 Nos.)
Stop watch : Least count - 0.01 Sec
Vernier caliper : Least count -0.01cm
Screw gauge: Least count -0.01mm
For more details please refer datasheet.

Product Overview

Lab instrument to measure the pH of any 
water based aqueous solution
pH : 0 to 14pH
mv : 0 to +1999mv
Resolution : 0.01pH ; 1mv
Accuracy : +0.01pH +1Digit
Repeatability : 0.01pH +1mv
Slope Correction : 80 to 100%
Temperature Coefficient : 100uv/deg C
Recorder Output : 0 to 10mV / pH adjustable
Line Power Supply : 230V +10%, 50Hz
For more details please refer datasheet.

Product Overview

The Triaxial Test Apparatus is a crucial piece 
of equipment in the field of civil engineering, 
specifically within geotechnical engineering. 
It is used to determine the mechanical properties
of soil under various loading conditions.
Purpose: It evaluates the strength and other
properties of soil or rock specimens by applying
loads in three perpendicular directions.
For more details please refer datasheet.

Product Overview

The Relative Density Test is an important test 
in civil engineering that helps determine the
relative compactness of cohesionless soils, 
such as sands and gravels.
Application: It’s particularly useful in 
geotechnical investigations to assess soil 
stability for construction projects.
Understanding the relative density of soil 
is essential for ensuring that structures 
are built on a solid foundation.
For more details please refer datasheet.

Product Overview

Capacity : 1000 KN with Hydraulic operation 
Digital Display Indicator with load and 
capacity display (Microcontroller based)
Leas count : 0.01 KN
Indicator for PEAK, KG, KN and start
Auto cut at Full Load / Peak Load
Max. Clearance between Platens 390 mm
Max. Clearance between Side Platens 390 mm
Platen Size : 140 mm2
Piston Diameter : 78.7 mm
Hand Wheel control for Hydraulic Pressure 
For more details please refer datasheet.
 

Product Overview

The Universal Testing Machine (UTM) is a 
versatile piece of equipment widely used 
in material testing laboratories. Here are
some key points about the UTM:
Functionality: It is designed to test
various mechanical properties of materials,
such as tensile strength, compressive strength,
flexural strength, bending, shear, and hardness.
Applications: UTMs are essential for quality control,
research, and development, as they help assess the
strength, durability, and elasticity of materials.
For more details please refer datasheet.

Product Overview

Epicyclic Gear Train Apparatus
No. of teeth on the input wheel :
RING wheel(Internal Gear) : 62 teeth
Material Mild Steel
Color Blue and Red
Weight 100-150 Kilograms (kg)
Voltage 220-240 Volt (v)
Usage Industrial use
Type machine
For more details please refer datasheet.

Product Overview

The Tensile Testing Machine is a crucial instrument
in material testing laboratories for measuring the
tensile strength of materials. 
Purpose: It evaluates the mechanical properties of 
materials by applying a tensile (pulling) force to
a test specimen until it fails.
Function: The machine can use either an 
electro-mechanical or hydraulic system to apply the load.
Significance: By measuring the force required to
elongate and ultimately break a specimen, 
For more details please refer datasheet.
 

Product Overview

Calculation, Sub Area division , reference Line,
Projection Systems, National grids System ,
Grid to Ground,select Coordinate in order NEZ & ENZ , 
settings (units, precision,
Accuracy 1 Sec
Least Count 0.1 Sec
TELESCOPE
Magnification 30X
Image Erect
Minimum Focus Less than 2 meters
Focus Instrument must have auto focus facility.
For more details please refer datasheet.
 

Product Overview

We are a trusted supplier of a qualitative array
of Digital Theodolite to our highly esteemed clients.
Minimum Reading: 1" /5" Selectable
Accuracy: 2" / 5" Optional
Level & Compensation
Plate Level: 30"/2mm
Circular Level: 8'/2mm
System Auto Compensator:
Liquid-electric Detection ±4' Circular Level ±3'
Vertical Compensator:
Liquid-electric Detection ±1" Plate Level 30"/2mm
For more details please refer datasheet.

Product Overview

3 phase Auto Electrical Test Bench, designed 
to ensure the testing of even higher capacity
alternators, is loaded with features like safety, 
overload protection and higher capacity.
Starter Free spin Test with Timer Circuit for Auto cut-off
Starter with Short Circuit Test protection
Vacuum Pump Testing with small Oil Circulation system
Testing at High speed (6000 rpm) and low speeds (1500rpm,
1800rpm) with Test Pulley
Testing of both V Pulley and Poly V groove pulley mounted
Alternators
For more details please refer datasheet.

Product Overview

CNC Vertical Machine Center
Controller : Siemens/Fanuc
3Axis simultaneous controllable
Length of table : 550-750mm
Width of table : 400-550mm
Max load on table : 50-500kg
X Travel : 550-750mm
Y Travel : 400-550mm
Z Travel : 200-450mm
No. Of Tools : 8 (ATC/Manual)
Spindle Speed : 200-7000 RPM
For more details please refer datasheet.

Product Overview

High Precision CNC milling Machine 
for education sector and advanced model 
engineering and small component production
Fitted with precision ball screws driven
by motors and all three axis, giving a 
repeatable positional accuracy.
Predominantly manufactured in high grade cast 
iron, resulting in a stable andvibration 
absorbing plate form.
The spindle motor having high torque, with 
full CNC spindle speed control.
For more details please refer datasheet.

Product Overview

CNC Lathe Trainer (Pc Based)
Height of centers :100 mm
Distance between centers : 250 mm
Swing over bed: 150mm
Swing over cross slide : 50 mm
Travel of cross slide : 45 mm
Max. Turning dia. : 30 mm
Max. Turning length : 100 mm
Longitudinal traverse : 200 mm
Hole through main spindle : 20 mm
Spindle taper : ISO 40/ MT3
For more details please refer datasheet.
 

Product Overview

It finds application at various places 
as Machines depending upon there requirements
of diverse patrons. Finest quality raw material
is used in its fabrication at our vendors unit
and processed using hi tech machinery.
Total Length of Machine 8 feet
Length Of Bed:  6.25feet
Height of Bed:  3 feet
Chuck Dia: 1 feet
Usage For Industrial 
UseMaterial Mild Steel
For more details please refer datasheet.

Product Overview

It finds application at various places 
as Machines depending upon the requirements
of diverse patrons. Finest quality raw 
material is used 
Sliding Surface & Screw Cutting lathe
(All Gear head) 
Distance Between Center in MM : 1000
Swing  Over BED in MM:  400
Type STD.
For more details please refer datasheet.
 

Product Overview

Planer Machine For Industrial Use
Supply Ability:10 Unit Per Week
Delivery Time:15 - 30 Days
Usage:For Industrial Use
Voltage:250-380 Volt (v)
Material:Mild Steel
Product Type:Planner Machine
Weight:1500 Kilograms (kg)
Type:Machine
Equipment Materials:Cast Iron
Color:Green
For more details please refer datasheet.

Product Overview

Shaper Machine For Industrial Use
Delivery Time:15-30 Days
Supply Ability:10 Per Week
Equipment Materials:Cast Iron
Weight:1250 Kilograms (kg)
Type:Shaper Machine
Color:Green
Product Type:Machine
Voltage:220 Volt (v)
Material:Mild Steel
Usage:For Industrial Use
For more details please refer datasheet.

Product Overview

A High Temperature Muffle Furnace - 1400°C 
(Advance) is a sophisticated piece of laboratory
equipment designed for high-temperature applications.
Applications: The furnace is ideal for scientific
experiments and industrial use in physics labs, 
steel and paint industries, biotech companies, 
and small industrial production.
Purpose: It’s used for the sintering and heat
treatment of new materials, including metal, 
ceramic, nano-materials, and semiconductor materials.
For more details please refer datasheet.

Product Overview

High Temperature Muffle Furnace - 1700 C
Maximum Temp. :1700°C
Working Temp. :1600°C/1650°C
Temp. Accuracy:+ 2°C
Heating Elements: Molybdenum discilicide (MoSi2) 
heating elements, easily replaceable.
Inner Chamber: Ceramic Brick/Board with heating 
elements placed on the side walls.
Insulation: Ultra high purity alumina low thermal
mass insulation.
Construction: Tripple walled with air insulation 
on the outer side For Minimal Skin Temp.
For more details please refer datasheet.

Product Overview

Programmable Muffle Furnace - 1500 C
Maximum Temp. 1500°C
Working Temp. 1400°C
Temp. Accuracy + 1°C
Heating Elements Silicon Carbide Spiral / 
Rod type, with end connection, easily replaceable.
Inner Chamber: Ceramic Board with base plate of 
Silicon Carbide, with heating elements placed on top.
Insulation: Ceramic Fibre of Zirconia grade
Construction: Tripple walled with air insulation on 
the outer side For Minimal Skin Temp.
Body: Made of mild steel duly Powder Coated
For more details please refer datasheet.

Product Overview

Light Weight with ceramic Fiber wool insulation 
(instead of Brick insulation). Outer casing is 
made of double walled thick P.C.R.C. sheet, 
finished with attractive powder coating.
Element are made of KANTHAL "A-1" wire in coil
form.Insulation by Zirconia cerewool, which 
avoids loss of energy, this arrangement also
assures the most uniform distribution of heat. 
A viewing cap is also provided on the door.
Temperature controlled by "Microprocessor PID 
Digital Indicator cum Controller" fitted in the
front of the Furnace. 
For more details please refer datasheet.

Product Overview

Bottom Loading Furnace
Maximum Temp. : 1500°C
Working Temp. : 1400°C
Heating Elements: Silicon Carbide Heating
Element placed on two sides easily replaceable.
Insulation : High Density Ceramic Insulation.
Construction : The furnace has opening at the 
Top and Bottom. 
The bottom lid is closed by Motorized Lifting, 
the crucible with the sample can be lifted for 
heating and lowered by push of a bottom (motorised)
For more details please refer datasheet.
 

Product Overview

High Temperature Tube Furnace
Working Temp. : 1600°C/1650°C
Temp. Accuracy : +2°C
Heating Elements: Molybdenum discilicide
(MoSi2) heating elements, easily replaceable. 
Inner Chamber: Ceramic Brick/Board, with heating
elements placed on the side walls.
Insulation: Ultra high purity alumina low thermal 
mass insulation.
Construction: Tripple walled with air insulation 
on the outer side For Minimal Skin Temp.
Body : Made of mild steel duly Powder Coated.
For more details please refer datasheet.

Product Overview

A Split-Type Furnace is a versatile
piece of equipment used in various 
applications.
These tube furnaces can be used for 
horizontal (RSH) or vertical (RSV) 
operation.
The split-type design makes it easy
to change the working tube. 
For more details please refer datasheet.

Product Overview

The Three Zone Tube Furnace offers excellent 
temp.uniformity as the heated length is divided
into three zones, each with its own temp. 
controller and thermocouple. 
This system provides a longer uniform zone temp.
than that achieved by using a single zone furnace.
CONSTRUCTION: The furnace is table mounted. 
The tubular furnace is opened at both ends,
suitable to accommodate a tube of 65mm outer dia. 
The furnace is made of KANTHAL A1 modules, with 
elements embedded into the periphery, and are
virtually free radiating.
For more details please refer datasheet.

Product Overview

Outer casing is made of double walled
thick P.C.R.C Sheet, finished with 
attractive powder coating. 
Insulation is of ceramic fibre board or
with refractory brick insulation. 
Element are made of KANTHAL "A-1" wire 
in coil form.
Inner muffle size: 24inch wide, 30 inch
depth and 24inch high. 
Temperature set point accuracy ±1°C.
Rating is minimum 18 K.W. Suitable to 
work on 415/440 Volts A.C. 3 phase supply.
For more details please refer datasheet.

Product Overview

The tube furnace comprises of Alumina
tube of Dia 50mm and length 250mm, with 
hot zone of 100mm at the centre. 
The tube has both ends open, from one end
the thermocouple is placed. 
The cylindrical furnace can be oriented
vertically or Horizontally (as ordered).
The control panel of the furnace is separate 
having PID microprocessor controller, solid 
state relay, etc.
Suitable to work on 220V, 50Hz AC only.
For more details please refer datasheet.

Product Overview

Tilting Furnace
Maximum Temperature : 1100°C
Crucible: Silicon Carbide Pot
Capacity: 10kg. (Aluminium)
Thermocouple: K Type
Temp. Controller: PID Digital 
Temperature Controller.
Control Panel: Separate.
Tilting: Manual.
Fabrication: Heavy Angle Iron Frame
Power Supply: 415V, 3Phase AC
For more details please refer datasheet.

Product Overview

Therman Cvd Furnace
Number of zone: One/Two/Three Zone
Heating temperature range: Upto 1200°C/1400°C
Heating Element: Kanthal A-1/Silicon Carbide
Temperature accuracy: ± 1°C
Furnace tube size: ID = 60 mm OD = 65mm,
Quartz tube with flanges: High purity fused
quartz Size: ID=60mm, OD=65mm, length=1200 
(for temp upto 1100°C).
Flanges: Stainless steel 304 flanges on both ends,
these are high vacuum flanges with double silicon 
'O' ring and metal ring. 
For more details please refer datasheet.

Product Overview

A vacuum furnace is a furnace that maintains
a vacuum around its contents during processing. 
Furnace Structure: Double layers steel casing
with fan cooling Inner vacuum furnace chamber
Size = 200 x 200 x 200mm (W x D x H) Suitable
to keep Alumina tray of size = 150 x 150 x 50mm. 
Outer steel cylindrical chamber with vacuum & gas
purging attachment.
Temperature Control: Programmable PID Digital auto temp.
control (1 prog. x 16 segments) Over-heat protection 
and thermocouple broken protection.
For more details please refer datasheet.

Product Overview

Salt bath furnace for quenching up to 800°C
Bath Volume: Dia = 70cm, Depth = 70cm
Material of Crucible: SS 310, 8mm Thickness
Heating Element: Kanthal A1
Temp. Range: 150°C to 800°C
Temp. Control : + 1°C
Operation: 6 to 12 HRS
Temp. Control: PID Temp. Control with
contactor / Relay etc.
Construction: Cylindrical in shape, having top 
opening, with manual cover closing. 
For more details please refer datasheet.

Product Overview

Deep Freezer designed for quick freezing 
& storing at low temperature. 
Constructed double walled, Exterior is 
made of sheet steel powder coated. 
PUF INSULATION to minimise heat loss.
'ISI' marked hermetically sealed compressor,
for CFC free refrigerant
Capillary controlled balanced hermetically
sealed Refrigeration is most economical & 
trouble free.
Fitted with Microprocessor Digital Temp. 
For more details please refer datasheet.

Product Overview

Deep Freezer designed for quick freezing 
& storing at low temperature. 
Constructed double walled, Exterior is 
made of sheet steel powder coated. 
PUF INSULATION to minimise heat loss.
'ISI' marked hermetically sealed compressor,
for CFC free refrigerant
Capillary controlled balanced hermetically
sealed Refrigeration is most economical & 
trouble free.
Fitted with Microprocessor Digital Temp. 
For more details please refer datasheet.

Product Overview

Aesthetically designed cabinet gives a pleasant look. 
It is a free standing castor mounted unit. 
It is supplied with a powerful double stage
vacuum pump.
Hermetically sealed compressor gives 
temperature upto -40°C (at ambient temp. 20°C)
Condenser trap is provided of stainless steel 
dished bottom for complete effluent removal.
Refrigerant coils made of copper are PUF 
insulated for maximum efficiency.
For more details please refer datasheet.

Product Overview

Stainless Steel Working Chamber (removable), 
size 6 inch dia, with transparent photo resist
lid with interlock safety switch.
Speed: 500-8000 RPM (Optional: upto 10000 RPM)
Accuracy <+0.5% of Full Speed
Microprocessor Programmable Speed control with 
respect to time.
Pre set editable program of 16 step per program
with maximum of 4 programs.
Real time display of RPM, time and program steps.
Nonvolatile program memory.
For more details please refer datasheet.
 

Product Overview

Stainless Steel Working Chamber (removable), 
size 6 inch dia, with transparent photo resist
lid with interlock safety switch.
Speed: 500-8000 RPM. (Optional: upto 10000 RPM)
Microprocessor Speed Control.
Digital Speed Indicator.
Vacuum Dial Gauge.
Solenoid Vacuum Release Switch.
Digital Timer 1 to 999 sec.
Vacuum chuck: Derlin made circular substrate 
holders of Dia 0.5", 1", 1.5" & 2.0".
For more details please refer datasheet.

Product Overview

Temperature is controlled by PID Digital 
Temperature Controller from RT+5°C to 250°C
+1°C. Beaded Heating Elements are placed in 
ribs at the bottom and sides with air 
circulating fan. 
Double walled, inside made of Stainless Steel
304 & outer body of Mild steel sheet finished
with attractive powder coating paint with S.S.
wire mesh nickel plated trays. 
To work on 220/230 Volts A.C.
For more details please refer datasheet.

Product Overview

Microprocessor based Vacuum ovens are accurate 
and reliable.
Proportional Integral Derivative (PID) temperature
control system continuously monitors rate of temp.
change, eliminating temperature overshoot and undershot.
Heaters are embedded on the periphery of the chamber
(for cylindrical ovens)/ tubular air heaters placed 
at the bottom of chamber (for rectangular ovens), 
providing excellent temperature uniformity and quick
heating times.
The gap between the inner and outer wall is filled
with special grade glass wool insulation.
For more details please refer datasheet.

Product Overview

Double Wall Construction, Inside & outside 
made of Stainless Steel 304, with Stainless 
Steel Basket.
RADIAL LOCKING SYSTEM (chrome plated) and paddle
lifting, with water level arrangement.
Lid made of Stainless Steel 304 plate.
Provided with built-in safety valve, pressure
gauge,pressure release valve.
With Automatic Pressure switch, pressure is 
adjustable from 5 to 20 psi + 1 psi.
Suitable to operate on 220V, single phase AC supply
For more details please refer datasheet.

Product Overview

Triple wall construction, all three wall inner, 
jacket, outer are made of stainless steel 304, 
with S.S Basket.
RADIAL LOCKING SYSTEM (chrome plated) and paddle
lifting, with water level arrangement.
Lid made of Stainless Steel Plate 304.
Provided with built - in safety valve, pressure
gauge, pressure release valve.
With Automatic Pressure switch, pressure is adjustable
form 5 to 20 psi + 1 psi.
Suitable to operated on 220v, single phase AC supply
For more details please refer datasheet.

Product Overview

Sturdy double walled construction with boiler/inner
chamber made of stainless steel 304 sheet. 
Outer shell is made of Stainless steel duly polished.
Lid is made of Stainless steel plate 304 and is 
tightened by radial locking system (chrome plated)
with paddle lifting. 
Moulded, joint less gaskets are made of Neoprene rubber.
Fitted with Microprocessor based temp. 
Controller having 16 x 2 Character LCD display which 
enables automatic purging of cold air, sterilizing hold
time and cycle end with automatic exhaust of pressure. 
For more details please refer datasheet.