Fully Automated Production Line Testing of Large Cells for EVs or Mid-sized Packs of up to 100 V
Resistance measurement ranges: 3 mΩ to 3 kΩ
Basic accuracy: ±0.5% rdg
Measurement frequency: 1 kHz ±0.2 Hz
Measurement method: AC four-terminal method
Voltage measurement ranges: 6 V to 100 V
Basic accuracy: ±0.01% rdg. ±3 dgt.Response time 10 ms
Functions: Contact check, Zero adjustment (±1000 counts), Pulse measurement, Comparator (Hi/ IN/ Lo), Statistical calculations (Max. 30,000), Delay, Average, Panel saving/loading, Memory storage, LabVIEW® driver
Power supply 100 to 240 V AC, 50 Hz/60 Hz, 35 VA max. For more details refer datasheet
Battery Testers for Production Line Testing of Battery Packs and Modules,3 mΩ to 3000 Ω/60V DC.
Resistance measurement ranges:3 mΩ to 3000Ω,7 ranges.
Accuracy: ± 0.5% rdg.
Measurement frequency: 1 kHz ±0.2 Hz.
Voltage measurement ranges: 6V to 60V.
Basic accuracy: ±0.01% rdg. ±3 dgt.
Measurement time: Response time + sampling rate, approx, 10 ms for measurements.
Power supply: 100 to 240 VAC, 50/60 Hz, 30 VA max. For more Details refer datasheet.
Battery Testers for Production Line Testing of High Voltage Battery Packs and Modules,3 mΩ to 3000 Ω/300 V DC.
Resistance measurement ranges:3 mΩ to 3000 Ω,7 ranges.
Accuracy: ± 0.5% rdg.
Testing source frequency: 1 kHz ± 0.2 Hz.
Voltage measurement ranges 6 VDC to 300 VDC, 3 ranges.
Accuracy: ± 0.01% rdg.
Measurement time: Response time + sampling rate, approx. 10 ms for measurements.
Power supply: 100 to 240 VAC, 50/60 Hz, 30 VA max. For more details refer datasheet.
Fully Automated Testing of batteries up to 300 V.
Resistance measurement ranges:3 mΩ to 3kΩ,7 ranges.
Accuracy: ± 0.5% rdg.
Testing source frequency: 1 kHz ± 0.2 Hz,
Voltage measurement ranges: 6 V to 300 V.
Accuracy: ± 0.01% rdg.
Functions: Contact check, Zero adjustment (±1000 counts),Pulse measurement,Comparator(Hi/ IN/ Lo),Statisticalcalculations(Max.30,000),Delay,Average,
Panel saving/loading, Memory storage, LabVIEW® driver
Power supply: 100 to 240 V AC, 50 Hz/60 Hz, 35 VA max. For more details refer datasheet.
Fully automated production line testing of small cells for power motors or small packs of up to 60 V
Resistance measurement ranges:30 mΩ to 3kΩ,6 ranges.
Accuracy: ± 0.5% rdg.
Testing source frequency: 1 kHz ± 0.2 Hz,
Voltage measurement ranges: 6 V to 60 V.
Accuracy: ± 0.01% rdg.
Response time: 10 ms
Functions: Contact check, Zero adjustment (±1000 counts), Pulse measurement, Comparator (Hi/ IN/ Lo), Statistical calculations(Max.30,000),Delay,Average, Panel saving/loading, Memory storage, LabVIEW® driver
Power supply: 100 to 240 V AC, 50 Hz/60 Hz, 35 VA max. For more details refer datasheet
Achieve Long Service Life Battery Modules by Measuring Reaction Resistance.
Measured information: Impedance,voltage,temperature.
Impedance measurement ranges: 3.0000 mΩ, 10.0000 mΩ, 100.000 mΩ
Frequency: 0.1 Hz to 1050 Hz,
Voltage measurement range: 5.00000 V (single range).
Accuracy: Z: ±0.4% rdg.θ: ±0.1 °,V: ±0.0035% rdg. ±5 dgt.Temperature: ±0.5°C (at 10.0 to 40.0°C)
Functions: Comparator, self-calibration, sample delay,average,contact check,measurement current error, and other
Power supply: 100 to 240 V AC, 50/60 Hz, 80 VA max. For more details refer datasheet
Detect contamination that could cause defects.
Improve battery cell productivity through high-speed testing.
Main functions:Insulation resistance test,Break Down Detect function(BDD),Contact check function
Resistance value display range : 0.050 MΩ to 9999 MΩ
Resistance range : 2 MΩ, 20 MΩ, 200 MΩ, 2000 MΩ, AUTO
Accuracy: ±1.5％ rdg.
Power supply: 100 V to 240 V AC. For more details refer datasheet
MECO ABM18 is a portable Automobile Battery Tester which can check the capacity condition of different types of Motorcycle and Motorcar batteries from 2 to 200Ah.
The product consists of a Load Resistor and Testing Clip. The state of the battery is indicated on the meter dial as 'FULLUP' (White), 'NORMAL' (Green),'RECHARGE' (Yellow), 'DISCHARGE' (Red) directly.
Rated Voltage of Battery to be Tested : 2, 6, 12V DC
Rated Capacity of Battery to be Tested : 2 - 200Ah
Weight : 500gms (approx.)
Dimensions : 225 x 124 x 68mm (approx) For more details refer datasheet
MECO BM63 is a portable Battery (Load) Meter which can check the capacity condition of different types of batteries from4 to 500Ah.
The product consists of a Load Resistor and Testing Clip. The state of the battery is indicated on the meter dial as 'FULLUP' (White), 'NORMAL' (Green),'RECHARGE' (Yellow), 'DISCHARGE' (Red) directly.
DC Voltmeter : 0 -15V DC
Rated Voltage of Battery to be Tested : 2, 6, 12V DC
Rated Capacity of Battery to be Tested : 4 - 500Ah
Weight : 550gms (approx.)
Dimensions : 220 x 120 x 70mm (approx) For more details refer datasheet
DIGITAL BATTERY METER (UPTO 200 AH & 12V) - LOAD TESTER
LED Indication of Battery Condition : GOOD (Green), WEAK (Yellow) & BAD (Red)
Rated Voltage of Battery to be Tested : 6, 12V DC
Rated Capacity of Battery to be Tested : 40 ~ 200Ah
Battery Load Test Current : 80A
Weight : 900gms (approx.)
Dimensions : 205 x 115 x 70mm (approx) For more details refer datasheet
Motorcycle / Two Wheeler Battery Meter - MBM27 - meco
Motorcycle / Two Wheeler Battery Meter (12V, 3 TO 20AH)
Display of Battery Condition [Good / Caution / Replace].
CCA Range : 100 ~ 1000
Ah Range : 3 ~ 20Ah (not continuos)
Voltage Range : 9 ~ 16V ±3%
Weight : 266g (approx.)
Dimensions : 146 x 82 x 25mm (approx.) For more details refer datasheet.
Battery Capacity (Impedance) Tester (upto 500 ah& 40V)
Resistance measurement ranges:40mΩ, 400mΩ, 4Ω, 40Ω.
Accuracy: ±(1% Reading + 8 Digits) on all Ranges
Voltage measurement ranges:4V, 40V.
Accuracy: ±(0.1% Reading + 6 Digits).
Memory & Read Function
Right Device to know the TRUE -LIFE of Battery Capacity (Resistive / Voltage) Simultaneously Measure
On - Line Testing without shutting down battery For more details refer datasheet.
Vehicle Battery System Meter Suitable for 12V DC Batteries
CCA Range : 100 ~ 1700
IEC Range : 100 ~ 1000
EN Range : 100 ~ 1700
DIN Range : 100 ~ 1000
Battery Voltage : 12V
Battery Condition : LED Indication GOOD (Green), WEAK (Yellow) & BAD (Red)
Safety Standard : CAT III 600V
Weight : 300g (approx.) For more details refer datasheet.
Vehicle Battery System Meter Suitable for 12 and 24 V DC Batteries
CCA Range : 100 ~ 1700
IEC Range : 100 ~ 1000
EN Range : 100 ~ 1700
DIN Range : 100 ~ 1000
Battery Voltage : 12V / 24V
Display Battery Condition : GOOD / OK / Pay Attention / Replace
Safety Standard : CAT III 600V
Weight : 400g (approx.) For more details refer datasheet.
Vehicle Battery System Meter with Built - In Printer - VBSM6246P - meco
Vehicle Battery System Meter with Built - In Printer Suitable for 12 and 24 V DC Batteries
CCA Range : 100 ~ 1700
IEC Range : 100 ~ 1000
EN Range : 100 ~ 1700
DIN Range : 100 ~ 1000
Battery Voltage : 12V / 24V
Display Battery Condition : GOOD / OK / Pay Attention / Replace
Safety Standard : CAT III 600V
Weight : 450g (approx.) For more details refer datasheet.
