Our Products

Battery Tester - BT3554-50 - HIOKI
Product Overview

Streamline UPS and lead-acid battery diagnostics with measurement and recording guidance
Resistance measurement range: 3 mΩ to 3 Ω, 4 ranges
Accuracy: ±0.8 % rdg.
Testing source frequency: 1 kHz ±30 Hz
Testing current: 160 mA,16 mA, 1.6 mA 
Voltage measurement range: ± 6 V to ± 60 V,2 ranges, Accuracy: ±0.08 % rdg ±6 dgt
Temperature Measurement range: -10°C to 60°C
Measurement accuracy*: ±1.0°C (±1.8°F)
Power supply: LR6 (size AA) alkaline battery ×8
For more Details refer datasheet

Battery HiTester - BT3562A - HIOKI
Product Overview

Fully Automated Production Line Testing of Large Cells for EVs or Mid-sized Packs of up to 100 V
Resistance measurement ranges: 3 mΩ to 3 kΩ
Basic accuracy: ±0.5% rdg 
Measurement frequency: 1 kHz ±0.2 Hz
Measurement method: AC four-terminal method
Voltage measurement ranges: 6 V to 100 V 
Basic accuracy: ±0.01% rdg. ±3 dgt.Response time    10 ms
Functions: Contact check, Zero adjustment (±1000 counts), Pulse measurement, Comparator (Hi/ IN/ Lo), Statistical calculations (Max. 30,000), Delay, Average, Panel saving/loading, Memory storage, LabVIEW® driver
Power supply    100 to 240 V AC, 50 Hz/60 Hz, 35 VA max.
For more details refer datasheet
 

Battery HiTester - BT3564 - HIOKI
Product Overview

High-Voltage Battery Tester for Measuring EV and PHEV Battery Packs.
Resistance measurement ranges:3 mΩ to 3kΩ,7 ranges.
Accuracy: ± 0.5% rdg.
Testing source frequency: 1 kHz ± 0.2 Hz,
Voltage measurement ranges:    10 VDC to 1000 VDC.
Accuracy: ± 0.01% rdg.
Comparator functions:Judgment result: Hi/IN/Lo 
Power supply: 100 to 240 V AC, 50/60 Hz, 30 VA max.
For more details refer datasheet

Battery Impedance Meter - BT4560 - HIOKI
Product Overview

Achieve Long Service Life Battery Modules by Measuring Reaction Resistance.
Measured information: Impedance,voltage,temperature.
Impedance measurement ranges: 3.0000 mΩ, 10.0000 mΩ, 100.000 mΩ
Frequency: 0.1 Hz to 1050 Hz,
Voltage measurement range: 5.00000 V (single range).
Accuracy: Z: ±0.4% rdg.θ: ±0.1 °,V: ±0.0035% rdg. ±5 dgt.Temperature: ±0.5°C (at 10.0 to 40.0°C)
Functions: Comparator, self-calibration, sample delay,average,contact check,measurement current error, and other
Power supply: 100 to 240 V AC, 50/60 Hz, 80 VA max.
For more details refer datasheet

Battery Meter - BM63 - MECO
Product Overview

MECO BM63 is a portable Battery (Load) Meter which can check the capacity condition of different types of batteries from4 to 500Ah.
The product consists of a Load Resistor and Testing Clip. The state of the battery is indicated on the meter dial as 'FULLUP' (White), 'NORMAL' (Green),'RECHARGE' (Yellow), 'DISCHARGE' (Red) directly.
DC Voltmeter : 0 -15V DC
Rated Voltage of Battery to be Tested : 2, 6, 12V DC
Rated Capacity of Battery to be Tested : 4 - 500Ah
Weight : 550gms (approx.)
Dimensions : 220 x 120 x 70mm (approx)
For more details refer datasheet

Digital Battery Meter - DBM72 - MECO
Product Overview

DIGITAL BATTERY METER (UPTO 200 AH & 12V) - LOAD TESTER 
LED Indication of Battery Condition : GOOD (Green), WEAK (Yellow) & BAD (Red)
Rated Voltage of Battery to be Tested : 6, 12V DC
Rated Capacity of Battery to be Tested : 40 ~ 200Ah
Built-In 10 Seconds Timer to Auto Cut-Off Load After Test
Temperature Rise is Controlled (for Circuit Protection)
Two Way Internal Resistance Measurement
LED Indication of Battery Condition : 
GOOD (Green), WEAK (Yellow) & BAD (Red)
Battery Load Test Current : 80A
Weight : 900gms (approx.)
Dimensions : 205 x 115 x 70mm (approx)
For more details refer datasheet

Motorcycle / Two Wheeler Battery Meter - MBM27 - MECO
Product Overview

Motorcycle / Two Wheeler Battery Meter (12V, 3 TO 20AH) 
Display of Battery Condition [Good / Caution / Replace].
CCA Range : 100 ~ 1000
Ah Range : 3 ~ 20Ah (not continuos)
Voltage Range : 9 ~ 16V ±3%
Weight : 266g (approx.)
Dimensions : 146 x 82 x 25mm (approx.)
For more details refer datasheet.

Vehicle Battery System Meter with Built - In Printer - VBSM6246P - MECO
Product Overview

Vehicle Battery System Meter with Built - In Printer Suitable for 12 and 24 V DC Batteries
CCA Range : 100 ~ 1700
IEC Range : 100 ~ 1000
EN Range : 100 ~ 1700
DIN Range : 100 ~ 1000
Battery Voltage : 12V / 24V
Display Battery Condition : GOOD / OK / Pay Attention / Replace
Safety Standard : CAT III 600V
Weight : 450g (approx.)
For more details refer datasheet.

Battery Capacity Tester - BT100 - EXTECH
Product Overview

The Extech BT100 is a Battery Capacity Tester. 
We can use to test the condition of batteries quickly and easily.
On-line testing without disconnecting battery
Built-in datalogger manually stores up to 999 sets and 
9600 sets for continuous datalogging
Simultaneously measures DC Voltage and AC Milliohms 
Includes Windows® 95/98/NT/2000/ME/XP compatible 
software for downloading readings to a PC
For more details refer datasheet.

Vehicle Battery System Meter - VBSM6129B - MECO
Product Overview

MECO VBSM6129B is a portable Vehicle Battery System Meter
Overload Protection to ensure Operator Safety
Loose Lead Detection 
CCA Range : 100 ~ 1700
IEC Range : 100 ~ 1000
EN Range : 100 ~ 1700
DIN Range : 100 ~ 1000
Battery Voltage : 12V
For more details refer datasheet.

Digital Multimeter - DT4221 - HIOKI
Product Overview

Premier Pocket DMM with CAT IV 300 V,CAT III 600 V Safety
DC Voltage range:600.0 mV to 600.0 V, 4 ranges, 
Basic accuracy: ±0.5 % rdg. ±5 dgt.
AC Voltage range    6.000 V to 600.0 V, 3 ranges, 
Frequency characteristics: 40 Hz - 1 kHz
Basic accuracy 40 - 500 Hz : ±1.0 % rdg. ±3 dgt.
Resistance range    N/A
Capacitance range    N/A
Frequency range    AC V measurement: 99.99 Hz to 9.999 kHz,3 ranges
Basic accuracy: ±0.1 % rdg. ±2 dgt.
For more details refer datasheet.

Digital Multimeter - DT4222 - HIOKI
Product Overview

DT4222 is a pocket-sized digital multimeter 
Designed specifically for general purpose testing, 
DC Voltage range:600.0 mV to 600.0 V, 4 ranges, 
Basic accuracy: ±0.5 % rdg. ±5 dgt.
AC Voltage range:6.000 V to 600.0 V, 3 ranges, 
Frequency characteristics: 40 Hz - 1 kHz
Basic accuracy 40 - 500 Hz: ±1.0 % rdg. ±3 dgt. 
Resistance range:600.0 Ω to 60.00 MΩ, 6 ranges, 
Basic accuracy: ±0.9 % rdg. ±5 dgt.
For more details refer datasheet.

Digital Multimeter - DT4223 - HIOKI
Product Overview

Pocket DMM that Prevents False Circuit Breaker Trips
DC Voltage range:600.0 mV to 600.0 V, 4 ranges,
Basic accuracy: ±0.5 % rdg. ±5 dgt.
AC Voltage range:6.000 V to 600.0 V, 3 ranges,
Frequency characteristics: 40 Hz - 1 kHz
Basic accuracy 40 - 500 Hz : ±1.0 % rdg. ±3 dgt.
Resistance range:600.0 Ω to 60.00 MΩ, 6 ranges
Basic accuracy: ±0.9 % rdg. ±5 dgt.
Frequency range    AC V measurement:99.99 to 9.999 kHz,3 ranges
Basic accuracy: ±0.1 % rdg. ±2 dgt.
For more details refer datasheet.

Digital Multimeter - DT4224 - HIOKI
Product Overview

Pocket DMM that Prevents False Circuit Breaker Trips
DC Voltage range:600.0 mV to 600.0 V, 4 ranges, 
Basic accuracy: ±0.5 % rdg. ±5 dgt.
AC Voltage range:6.000 V to 600.0 V, 3 ranges, 
Frequency characteristics: 40 Hz - 1 kHz
Basic accuracy 40 - 500 Hz:±1.0 % rdg. ±3 dgt. 
Resistance range:600.0 Ω to 60.00 MΩ, 6 ranges
Basic accuracy: ±0.9 % rdg. ±5 dgt.
Capacitance range:    1.000 μF to 10.00 mF, 5 ranges,
Basic accuracy: ±1.9 % rdg. ±5 dgt.
Frequency range    AC V measurement: 99.99 Hz to 9.999 kHz, 3 ranges
For more details refer datasheet.

Digital Multimeter - DT4252 - HIOKI
Product Overview

Standard DMM that Delivers Top Safety and Reliability
DC Voltage range:600.0 mV to 1000 V,5 ranges
Basic accuracy: ±0.3 % rdg. ±5 dgt.
AC Voltage range:6.000 V to 1000 V, 4 ranges,
Frequency characteristics: 40 Hz - 1 kHz
Basic accuracy 40 - 500 Hz : ±0.9 % rdg. ±3 dgt.
Resistance range:600.0 Ω to 60.00 MΩ, 6 ranges, 
Basic accuracy: ±0.7 % rdg. ±5 dgt.
DC Current range:6.000 A /10.00 A, 2 ranges, 
Basic accuracy: ±0.9 % rdg. ±5 dgt.
For more details refer datasheet.

Digital Multimeter - DT4253 - HIOKI
Product Overview

Standard DMM that Delivers Top Safety and Reliability
DC Voltage range:600.0 mV to 1000 V,5 ranges
Basic accuracy: ±0.3 % rdg. ±5 dgt.
AC Voltage range:6.000 V to 1000 V, 4 ranges,
Frequency characteristics: 40 Hz - 1 kHz
Basic accuracy 40 - 500 Hz : ±0.9 % rdg. ±3 dgt.
Resistance range:600.0 Ω to 60.00 MΩ, 6 ranges, 
Basic accuracy: ±0.7 % rdg. ±5 dgt.
DC Current range:6.000 A /10.00 A, 2 ranges, 
Basic accuracy: ±0.9 % rdg. ±5 dgt.
For more details refer datasheet.

Digital Multimeter - DT4255 - HIOKI
Product Overview

Standard DMM that Delivers Top Safety and Reliability
DC Voltage range:600.0 mV to 1000 V 5 ranges, 
Basic accuracy:±0.3 % rdg. ±3 dgt.
AC Voltage range:6.000 V to 1000 V, 4 ranges, 
Frequency characteristics: 40 Hz to 1 kHz
Basic accuracy 40 - 500 Hz:±0.9 % rdg. ±3 dgt.
Resistance range:600.0 Ω to 60.00 MΩ, 6 ranges, 
Basic accuracy: ±0.7 % rdg. ±3 dgt.
(use with Clamp on probes) :  10.00 A to 1000 A, 7ranges
For more details refer datasheet.

Digital Multimeter - DT4256 - HIOKI
Product Overview

General Purpose Testers with Rich Measurement Functions
DC Voltage range:600.0 mV to 1000 V,5 ranges
Basic accuracy:±0.3 % rdg.±3 dgt.
AC Voltage range:6.000 V to 1000 V,4 ranges, 
Frequency characteristics: 40 Hz to 1 kHz
Basic accuracy 40 - 500 Hz : ±0.9 % rdg.±3 dgt.
Resistance range:600.0 Ω to 60.00 MΩ,6 ranges, 
Basic accuracy: ±0.7 % rdg. ±3 dgt.
DC Current range:60.00 mA to 10.00 A,4 ranges,
For more details refer datasheet.

Digital Multimeter - DT4261 - HIOKI
Product Overview

Analyzing Issues and Dramatically Improving Work Efficiency
DC Voltage range:600.0 mV to 1000 V,5 ranges, 
Basic accuracy: ±0.15% rdg. ±2 dgt.
AC Voltage range:6.000 V to 1000 V,4 ranges, 
Frequency characteristics: 40 Hz to 1kHz
Basic accuracy:40 Hz - 500 Hz: ±0.9% rdg.±3dgt.
DC + AC Voltage range:6.000 V to 1000 V,4 ranges, 
Frequency characteristics: DC, 40 Hz to 1 kHz
Basic accuracy DC, 40 Hz - 500 Hz: ±1.0% rdg.±13dgt.
For more details refer datasheet.

Digital Multimeter - DT4281 - HIOKI
Product Overview

Superior Accuracy DMM Topped with Safety Terminal Shutters
DC Voltage range:60.000 mV to 1000.0 V,6ranges, 
Basic accuracy:±0.025% rdg.±2 dgt.
AC Voltage* range:60.000 mV to 1000.0 V,6ranges,
Frequency characteristics:20 Hz - 100 kHz
Basic accuracy 45 - 65 Hz:±0.2 % rdg. ±25 dgt.
DC+AC Voltage* range:6.0000 V to 1000.0 V,4 ranges, 
Frequency characteristics:20 Hz - 100 kHz
Basic accuracy 45 - 65 Hz:±0.3 % rdg. ±30 dgt.
For more details refer datasheet.

Digital Multimeter - DT4282 - HIOKI
Product Overview

Superior Accuracy DMM Topped with Safety Terminal Shutters
DC Voltage range:60.000 mV to 1000.0 V,6ranges, 
Basic accuracy:±0.025% rdg.±2 dgt.
AC Voltage* range:60.000 mV to 1000.0 V,6ranges,
Frequency characteristics:20 Hz - 100 kHz
Basic accuracy 45 - 65 Hz:±0.2 % rdg. ±25 dgt.
DC+AC Voltage* range:6.0000 V to 1000.0 V,4 ranges, 
Frequency characteristics:20 Hz - 100 kHz
Basic accuracy 45 - 65 Hz:±0.3 % rdg. ±30 dgt.
For more details refer datasheet.

Digital Multimeter - DM7276,DM7276-01 - HIOKI
Product Overview

7-1/2 Digit,9 ppm High Precision DC Voltmeter
DC Voltage:100 mV to 1000 V,5 ranges
Basic accuracy 10 V range: ±0.0009% rdg.±12 μV
Temperature:-10.0°C to 60.0°C (14.0°F to 140°F), 
combined with sensor Z2001: ±0.5°C (5.0°C to 35°C)
Integration time Integration time unit:PLC/ms 
PLC setting:0.02/0.2/1/10/100,ms setting:1ms to 9999 ms
Power supply:100 to 240 V AC, 50/60 Hz, 30 VA
For more details refer datasheet.

Precision DC Voltmeter - DM7275, DM7275-02 - HIOKI
Product Overview

7-1/2 Digit DC Voltmeter for R&D to Production Lines
DC Voltage:100 mV to 1000 V, 5 ranges
Basic accuracy:10 V range: ±0.0020% rdg. ±12 μV
Temperature:-10.0°C to 60.0°C (14.0°F to 140°F), 
combined with sensor Z2001: ±0.5°C (5.0°C to 35°C)
Integration time unit: PLC/ms
Measurement support functions Smoothing function, 
null, temperature compensation,scaling,over-range display,
self-calibration, auto-hold, contact check
Power supply:100 to 240 V AC, 50/60 Hz, 30 VA
For more details refer datasheet.

AC Clamp Meter - CM3281 - HIOKI
Product Overview

Large Jaw Lets You Clamp with Ease,
Measure thick cables right at the terminal
AC Current range:42.00 to 2000 A,3 ranges
Basic accuracy 50-60 Hz:±1.5% rdg. ±5 dgt.
DC Voltage range:420.0 mV to 600 V,5 ranges, 
Basic accuracy: ±1.0 % rdg. ±3 dgt.
AC Voltage range:4.200 V to 600 V,4 ranges
Basic accuracy 45-66 Hz:±1.8% rdg. ±7 dgt.
Power supply:Coin type lithium battery(CR2032) ×1,120 hours
For more details refer datasheet.

AC Clamp Meter - CM3291 - HIOKI
Product Overview

Large Jaw Lets You Clamp with Ease,
Measure thick cables right at the terminal
AC Current range:42.00 to 2000 A,3 ranges
Basic accuracy 45-66 Hz: ±1.5% rdg. ±5 dgt.
DC Voltage range:420.0 mV to 600 V,5 ranges, 
Basic accuracy: ±1.0 % rdg. ±3 dgt.(at 4.2 V range)
AC Voltage range:4.200 V to 600 V,4 ranges
Basic accuracy 45-66 Hz: ±1.8% rdg. ±7 dgt.
Power supply:Coin type lithium battery (CR2032) ×1,70 hours
For more details refer datasheet.

AC Clamp Meter - CM3286-50 - HIOKI
Product Overview

Quickly Check Current, Voltage, Power,and Power Factor
Detect Electricity Theft and Meter Tampering
AC voltage range:80.0 V to 600.0 V, Single range, 
Basic accuracy 45-66 Hz: ±0.7% rdg. ±3 dgt. 
Frequency characteristics: 45 to 1 kHz, True RMS
AC current range:0.060 A to 600.0 A,3 range, 
Basic accuracy 45-66 Hz: ±1.3% rdg. ±3 dgt. 
Frequency characteristics: 45 to 1 kHz, True RMS
Power range:0.005 kW to 360.0 kW
For more details refer datasheet.

AC Clamp Meter - CM3289 - HIOKI
Product Overview

Quickly clamp wires in even more confined spaces!
AC Current range:42.00 to 1000 A,3 ranges
Basic accuracy:±1.5 % rdg. ±5 dgt.
DC Voltage range:420.0 mV to 600 V,5 ranges, 
Basic accuracy:±1.0 % rdg. ±3 dgt.
AC Voltage range:4.200 V to 600 V,4 ranges
Basic accuracy:±1.8 % rdg. ±7 dgt.
Crest factor:2.5 or less at 2500 counts
Resistance range:420.0 Ω to 42.00 MΩ,6 ranges, 
For more details refer datasheet.

AC Leakage Clamp Meter - CM4001 - HIOKI
Product Overview

Leakage Current Meter with Remarkable Ease of Use
Double Your Work Speed with Innovative Jaw Design
AC Current range:60.00 mA/600.0 A,5 ranges 
Basic accuracy (45-66 Hz): ±1.5% rdg ±5 dgt 
Guaranteed accuracy: from 0.60 mA to 600.0A
Frequency range    40.0 Hz to 999.9 Hz
Crest factor    4.5 (4000 counts or less)
3 (more than 4000 counts, 6000 counts or less)
Output function    N/A 
For more details refer datasheet.

AC Leakage Clamp Meter - CM4002 - HIOKI
Product Overview

Prevent unexpected downtime!
Identify potential problems and avoid large problems
AC Current range:6.000 mA, 60.00 mA, 600.0 mA, 
6.000 A, 60.00 A, 200.0 A, 6 ranges, True RMS
Basic accuracy 45 Hz-400 Hz: ±1.0% rdg ±5 dgt
Basic accuracy 15 Hz-45 Hz,400 Hz-2 kHz:±2.0%rdg±5dgt
Defined accuracy range: 0.060 mA to 200.0 A
AC Voltage range    N/A
Frequency range    15.0 Hz to 2000 Hz
For more details refer datasheet.

AC Leakage Clamp Meter - CM4003 - HIOKI
Product Overview

Prevent unexpected downtime!
Identify potential problems and avoid large problems
AC Current range:6.000 mA,60.00 mA,600.0 mA,6.000 A,
60.00 A,200.0 A, 6 ranges, True RMS
Basic accuracy 45 Hz-400 Hz:±1.0%rdg±5 dgt 
Basic accuracy 15 Hz-45 Hz,400 Hz-2kHz:±2.0% rdg ±5 dgt
Defined accuracy range:0.060mA to 200.0A
AC Voltage range:N/A
Frequency range:15.0 Hz to 2000 Hz
For more details refer datasheet.

AC Clamp Meter - CM4141-50 - HIOKI
Product Overview

True RMS 2000 A AC Clamp Meter
AC Current range:60.00 A to 2000 A,3ranges, 
Basic accuracy 45-66 Hz: ±1.5% rdg. ±0.08 A 
Crest factor:For the 60.00 A range: 2.5 
(greater than 50.00 A and less than or equal to 60.00 A) 
to 2000 A range: 1.5 (2000 A or less)
DC Voltage range:600.0 mV to 1000 V 
AC Voltage range    6.000 V to 1000 V,4ranges 
Basic accuracy 45-66 Hz: ±0.9% rdg. 0.003 V (at 6 V)
For more details refer datasheet.

AC/DC Clamp Meter - CM4371-50 - HIOKI
Product Overview

True RMS 600 A AC/DC Clamp Meter 
With DMM Functions that Deliver Top Safety 
DC Current range:20.00A/600.0 A, 
Basic accuracy: ±1.3% rdg. ±0.08 A (20 A range)
AC Current range:20.00 A/600.0 A  
Basic accuracy:45-66 Hz: ±1.3% rdg.
Crest factor:20.00 A range: 7.5
600.0 A range: 3 or less
DC+AC Current range:20.00 A/600.0 A 
For more details refer datasheet.

AC/DC Clamp Meter - CM4373-50 - HIOKI
Product Overview

True RMS 2000 A AC/DC Clamp Meter 
With DMM Functions that Deliver Top Safety
DC Current range:600.0 A/2000 A, 
Basic accuracy:±1.3% rdg.
AC Current range:600.0 A/2000 A 
Basic accuracy 45 - 66 Hz:±1.3% rdg. ±0.3 A
Crest factor 600.0 A range:3 or less
2000 A range:2.84 or less
DC+AC Current range:600.0 A/2000 A
For more details refer datasheet.

AC/DC Clamp Meter - CM4375-50 - HIOKI
Product Overview

True RMS 1000 A AC/DC Clamp Meter
Easily Get Into Tight Spaces-Innovative Jaw
DC Current range:1000 A,
Basic accuracy:±1.3% rdg.±0.3 A
AC Current range:1000 A, 
Basic accuracy 45-66 Hz:±1.8% rdg.
Crest factor:1000 A range: 1.5
DC+AC Current range    1000 A 
Basic accuracy DC, 45-66 Hz: ±1.3% rdg.
For more details refer datasheet.

Display Unit - CM7291 - HIOKI
Product Overview

Multi-functional Receiving and Display Unit to Use
Output to Advanced Recorder or Logger
Measurement parameters:DC,AC,DC+AC,Hz
Crest factor:3at 5000 count  
Output method:WAVE, RMS, PEAK, FREQ
Input connectors:HIOKI PL 14
PEAK sensing duration:2 ms or greater
Other functions    Auto range,Zero adjustment at power-up, 
Analysis display, Filter, Output amplification, 
For more details refer datasheet.

Display Unit - CM7290 - HIOKI
Product Overview

Multi-functional Receiving/Display Unit to Use 
Output to Advanced Recorder or Logger
Measurement parameters:DC,AC,DC+AC,Hz
Crest factor:3 at 5000 count  
Output method:WAVE, RMS, PEAK, FREQ
Input connectors:HIOKI PL 14
PEAK sensing duration:2 ms or greater
Other functions    Auto range,Zero adjustment at power-up, 
Analysis display, Filter, Output amplification, 
For more details refer datasheet.

Card HiTester - 3244-60 - HIOKI
Product Overview

Product

Data Sheet
Not Found

Card-style Pocket Digital Multimeter 
for General Electrical Maintenance and Testing
DC Voltage range:419.9 mV to 500 V,5 ranges, 
Basic accuracy: ±0.7 % rdg. ±4 dgt.
AC Voltage range:4.199 V to 500 V,4 ranges, 
Basic accuracy 50 - 500 Hz : ±2.3 % rdg. ±8 dgt.
Resistance range:419.9 Ω to 41.99 MΩ, 6 ranges, 
Basic accuracy: ±2.0 % rdg. ±4 dgt.
Continuity buzzer:Detection level 50 Ω ±40 Ω,
Display    Digital LCD, max. 4199 digits
For more details refer datasheet.

Pencil Hitester - 3246-60 - HIOKI
Product Overview

Product

Data Sheet
Not Found

Pencil-style Pocket Digital Multimeter for 
General Electrical Maintenance, Testing and Hobbyists
DC Voltage range:419.9 mV to 600 V, 5 ranges, 
Basic accuracy: ±1.3 % rdg. ±4 dgt.
AC Voltage range:4.199 V to 600 V, 4 ranges,
Basic accuracy 50 - 500 Hz : ±2.3 % rdg. ±8 dgt.
Resistance range:419.9 Ω to 41.99 MΩ, 6 ranges, 
Basic accuracy: ±2.0 % rdg. ±4 dgt.
Continuity buzzer:Detection level 50 Ω ±40 Ω
For more details refer datasheet.

AC Clamp Meter - 3280-10F - HIOKI
Product Overview

Essential Equipment for Professional Electricians
Measure Current and Voltage with a Single Instrument
AC Current range:41.99 to 1000 A,3 ranges,
Basic accuracy: ±1.5 % rdg. ±5 dgt.
DC Voltage range:419.9 mV to 600 V,5 ranges, 
Basic accuracy: ±1.0 % rdg. ±3 dgt.
AC Voltage range:4.199 V to 600 V,4 ranges
(45 to 500 Hz, Average rectified),
Basic accuracy: ±1.8 % rdg. ±7 dgt.
Crest factor:N/A
For more details refer datasheet.

Clamp On AC/DC HiTester - 3287 - HIOKI
Product Overview

One-Touch Maintenance on All Types of AC/DC Equipment
DC Current range:10.00/ 100.0 A, 
Basic accuracy: ±1.5 % rdg. ±5 dgt.
AC Current range:10.00/ 100.0 A
Basic accuracy: ±1.5 % rdg. ±5 dgt.
DC Voltage range:419.9 mV to 600 V,5 ranges, 
Basic accuracy: ±1.3 % rdg. ±4 dgt.
AC Voltage range:4.199 V to 600 V,4 ranges
Basic accuracy: ±2.3 % rdg. ±8 dgt.
For more details refer datasheet.

Clamp On AC/DC HiTester - 3288-20 - HIOKI
Product Overview

One-Touch Maintenance on All Types of AC/DC Equipment
DC Current range:100.0/ 1000 A, 
Basic accuracy:±1.5 % rdg. ±5 dgt. 
AC Current range:100.0/ 1000 A,
Basic accuracy:±1.5 % rdg. ±5 dgt.
DC Voltage range:419.9 mV to 600 V,5 ranges, 
Basic accuracy:±1.3 % rdg. ±4 dgt.
AC Voltage range:4.199 V to 600 V,4 ranges,
Basic accuracy: ±2.3 % rdg. ±8 dgt.
For more details refer datasheet.

Analog Earth Tester - FT3151 - HIOKI
Product Overview

Classic Ground Resistance Tester Using 
3-Pole Method with Easy Cord Winding System
Measurement range:10 Ω,100 Ω, 1000 Ω 
Nominal Deviation    ±0.25 Ω    ±2.5 Ω    ±25 Ω
Functions:Auxiliary earth resistance check 
Earth potential measurement    0 to 30 V, 
Nominal Deviation: ±3.0 % f.s.
Power supply:LR6(AA)Alkaline battery×6,1100 times
For more details refer datasheet.

Lux(Light)Meter - FT3424 - HIOKI
Product Overview

Light Meter with Broad Coverage from Low to High Illuminance
Standards:DIN 5032-7:1985 class B,JIS C 1609-1:2006general AA class
Light receiving element    Silicon photo diode
Range selection:Auto/ Manual
Linearity:±2% rdg. 
Accuracy for temperature and humidity:21°C to 27°C,75% rh
Response time:Auto range:within 5 seconds, 
Manual range:within 2 seconds
D/A output:Output level: 2 V/range f.s.
For more details refer datasheet.

Lux(Light) Meter - FT3425 - HIOKI
Product Overview

High Reliability LUX METER Series, 
Complies with DIN Class B, 
Compatible with LED/OLED Lighting
Light receiving element:Silicon photo diode
Range selection:Auto/ Manual
Linearity:±2% rdg.
Accuracy for temperature and humidity:21°C to 27°C,75% rh
Response time:Auto range:within 5 seconds,Manual range:in 2 seconds
For more details refer datasheet.

Magnetic Field HiTester - FT3470-51 - HIOKI
Product Overview

Providing Robust Support for 3-Axis 
Magnetic Flux Density Measurement    
10Hz to 400kHz/10Hz to 2kHz/2kHz to 400kHz
Exposure level:General public/Occupational
Display:Single axes X, Y, Z (2000 counts), 
Composite RMS value R (3464 counts), Magnetic flux density 
(unit: T, G, A/m),Exposure level (unit: %)
Magnetic flux density/Ranges and accuracy:    
[X, Y, Z axes]:2.000 μT to 2.000 mT, 4 ranges, 
For more details refer datasheet.

Magnetic Field HiTester - FT3470-52 - HIOKI
Product Overview

Providing Robust Support for 3-Axis 
Magnetic Flux Density Measurement    
10Hz to 400kHz/10Hz to 2kHz/2kHz to 400kHz
Exposure level:General public/Occupational
Display:Single axes X, Y, Z (2000 counts), 
Composite RMS value R (3464 counts), Magnetic flux density 
(unit: T, G, A/m),Exposure level (unit: %)
Magnetic flux density/Ranges and accuracy:    
[X, Y, Z axes]:2.000 μT to 2.000 mT, 4 ranges, 
For more details refer datasheet.

Digital Earth Tester - FT6031-50 - HIOKI
Product Overview

Tough and Ready for the Field
IP67 Dustproof and Waterproof
Measurement system:Two-electrode method/
three-electrode method (switchable)
Measurement range:20Ω,200Ω,2000Ω(0Ω〜2000Ω)
Accuracy:±1.5%rdg ±8dgt,±1.5%rdg ±4dgt,±1.5%rdg ±4dgt
Earth voltage:0〜30.0 V rms
Accuracy:±2.3%rdg ±8dgt(50Hz/60Hz),±1.3%rdg ±4dgt(DC)
For more details refer datasheet.

Clamp On Earth Tester - FT6380-50 - HIOKI
Product Overview

Clamp-On Ground Resistance Tester with Super Slim Jaw
Earthing resistance range:0.20Ω to 1600Ω,10ranges
Zero suppression: Less than 0.02 Ω,
Accuracy: ±1.5 % rdg. ±0.02 Ω
AC Current range:20.00mA to 60.0A,5ranges, 
Zero suppression: Less than 0.05 mA,
Accuracy: ±2.0 % rdg. ±0.05 mA
Crest factor 5.0 or less 
Memory function:2000 data
For more details refer datasheet.

LCR Meter - IM3523A - HIOKI
Product Overview

Ideal for Production Lines of Electronic Parts 
Measurement modes:LCR(Measurement with single condition), 
Continuous testing(Measurement under saved conditions)
Measurement range:100mΩ to 100MΩ,10 ranges 
Output impedance:100Ω
Display : Monochrome LCD 
Basic accuracy: Z :±0.05% rdg. θ: ±0.03°
Measurement frequency:40Hz to 200kHz
For more details refer datasheet.

LCR Meter - IM3533 - HIOKI
Product Overview

From R&D Applications to Windings, 
Coil and Transformer Manufacturing
Measurement modes:LCR(single condition),
Transformer testing (N, M, ΔL), 
Continuous testing(under saved conditions)(LCR mode)
Measurement range:100mΩ to 100MΩ,10 ranges
Basic accuracy    Z :±0.05% rdg. θ: ±0.03°
Measurement frequency:1 mHz to 200 kHz 
For more details refer datasheet.

LCR Meter - IM3536 - HIOKI
Product Overview

LCR Meters with Measurement Frequency(DC),4Hz to 8MHz
Measurement modes:LCR(Measurement with single condition), 
Continuous testing(measurement under saved conditions)
Measurement range:100 mΩ to 100 MΩ,10 ranges 
Basic accuracy    Z :±0.05% rdg. θ: ±0.03°
Measurement frequency:4Hz to 8MHz 
Functions:Comparator, BIN measurement  
Trigger function, Open/short compensation, Contact check
For more details refer datasheet.

Impedance Analyzer - IM3570 - HIOKI
Product Overview

Product

Data Sheet
Not Found

Single Device for High Speed Testing and Frequency Sweeping
Measurement modes:LCR mode,Analyzer mode 
(Sweeps with frequency and level), 
Continuous measurement mode
Measurement parameters:Z,Y,θ,Rs(ESR),Rp,Rdc(DC resistance),
X, G, B, Cs, Cp, Ls, Lp,D (tanδ), Q
Measurement range:100mΩ to 100MΩ,12 ranges
Trigger function, Open/short compensation, Contact check
For more details refer datasheet.

Chemical Impedance Analyzer - IM3590 - HIOKI
Product Overview

For R&D applications of Electrochemical Components 
and Materials, Batteries, and EDLCs
Measurement modes:LCR mode, Continuous measurement mode 
(LCR mode / Analyzer mode), Analyzer mode 
(Sweeps with measurement frequency and measurement level,
temperature characteristics, equivalent circuit analysis)
Measurement range:100 mΩ to 100 MΩ, 10 ranges
Basic accuracy    Z: ±0.05% rdg. θ: ±0.03°
For more details refer datasheet.

Impedance Analyzer - IM7580A - HIOKI
Product Overview

Impedance Analyzer with 0.5ms Test Speed and Rpeatability
Measurement modes:LCR mode,Analyzer mode 
(Sweeps with measurement frequency and  level), 
Continuous measurement mode
Measurement parameters:Z,Y,θ,Rs(ESR),Rp,X,G,B,Cs,Cp,Ls,Lp
Measurable range:100 mΩ to 5 kΩ
Basic accuracy: Z: ±0.72 % rdg. θ: ±0.41°
Measurement frequency:1.0000MHz to 300.00MHz
For more details refer datasheet.

Impedance Analyzer - IM7581 - HIOKI
Product Overview

Impedance Analyzer with 0.5 ms Test Speed
Measurement modes:LCR mode,Analyzer mode 
(Sweeps with measurement frequency and level), 
Continuous measurement mode
Measurement parameters:Z,Y,θ,Rs(ESR),Rp,X,G,B,Cs,Cp,Ls,Lp,
Measurable range:100 mΩ to 5 kΩ
Basic accuracy    Z: ±0.72 % rdg. θ: ±0.41°
Measurement frequency:100.00kHz to 300.00MHz
For more details refer datasheet.

Impedance Analyzer - IM7583 - HIOKI
Product Overview

Impedance Analyzer with 0.5 ms Test Speed
Measurement modes:LCR mode,Analyzer mode 
(Sweeps with measurement frequency and level), 
Continuous measurement mode
Measurement parameters:Z,Y,θ,Rs(ESR),Rp,X,G,B,Cs,Cp,Ls,Lp,
Measurable range:100 mΩ to 5 kΩ
Basic accuracy    Z: ±0.65 % rdg. θ: ±0.38°
Measurement frequency:1 MHz to 600 MHz
For more details refer datasheet.

Impedance Analyzer - IM7585 - HIOKI
Product Overview

1MHz to 1.3GHz Measurement Frequency Impedance Analyzer 
with 0.5ms Test Speed and 0.07% Variability
Measurement modes:LCR mode,Analyzer mode 
(Sweeps with measurement frequency and level), 
Continuous measurement mode
Measurement parameters:Z,Y,θ,Rs(ESR),Rp,X,G,B,Cs,Cp,Ls,Lp
Measurable range:100 mΩ to 5 kΩ
Basic accuracy    Z: ±0.65 % rdg. θ: ±0.38°
Measurement frequency:1 MHz to 1.3 GHz 
For more details refer datasheet.

Impedance Analyzer - IM7587 - HIOKI
Product Overview

1 MHz to 3 GHz Measurement Frequency Impedance Analyzer 
with 0.5 ms Test Speed and 0.07% Variability
Measurement modes:LCR mode,Analyzer mode 
(Sweeps with measurement frequency and level), 
Continuous measurement mode
Measurement parameters:Z,Y,θ,Rs(ESR),Rp,X,G,B,Cs,Cp,Ls,Lp,
Measurable range:100 mΩ to 5 kΩ
Basic accuracy    Z: ±0.65 % rdg. θ: ±0.38°
Measurement frequency:1 MHz to 3 GHz 
For more details refer datasheet.

Analog Insulation Tester - IR4016 - HIOKI
Product Overview

Reliable and Efficient Insulation Testing in the Field
Rated output voltage:500 V DC
Effective maximum indicated value:100 MΩ
Accuracy 1st effective measuring range:0.1M to 50MΩ
Lower limit resistance:0.5 MΩ 
Overload protection:600 V AC (10 sec.)
AC voltage range;0 to 600 V (50/60 Hz)
500 kΩ or more input resistance
For more details refer datasheet.

Analog Insulation Tester - IR4017 - HIOKI
Product Overview

Reliable and Efficient Insulation Testing in the Field
Rated output voltage:500 V DC
Effective maximum indicated value:1000 MΩ
Accuracy 1st effective measuring range:1M to 500MΩ
Lower limit resistance:0.5 MΩ 
Overload protection:600 V AC (10 sec.)
AC voltage range;0 to 600 V (50/60 Hz)
500 kΩ or more input resistance
For more details refer datasheet.

Analog Insulation Tester - IR4018 - HIOKI
Product Overview

Reliable and Efficient Insulation Testing in the Field
Rated output voltage:1000 V DC
Effective maximum indicated value:2000 MΩ
Accuracy 1st effective measuring range:2M to 1000MΩ
Lower limit resistance:1 MΩ 
Overload protection:1200 V AC (10 sec.)
AC voltage range;0 to 600 V (50/60 Hz)
500 kΩ or more input resistance
For more details refer datasheet.

Digital Insulation Tester - IR4053 - HIOKI
Product Overview

Measure PV Insulation Resistance Safely,
Rated output voltage:500V DC,1000V DC
Maximum indicated value:2000MΩ,4000MΩ
Measuring range/Accuracy:0.200 to 500MΩ/±4%rdg.
1010 to 4000 MΩ / ±8% rdg.
Other measuring range/Accuracy:0 to 0.199MΩ/±2% rdg.
Lower limit resistance:0.05MΩ to 1 MΩ
For more details refer datasheet.

Digital Insulation Tester - IR4059 - HIOKI
Product Overview

Quick Response Comparator Offering 
Reading Stability in High-speed Digital Format
Rated output voltage:50V DC    to 1000V DC
Maximum indicated value:100MΩ to 4000MΩ
Lower limit resistance:0.05MΩ    to 1MΩ
Overload protection:600V AC (10s)
DC voltage range:4.2V to 600V,4 ranges,
Accuracy: ±1.3% rdg. ±4 dgt.,
Input resistance: 100 kΩ or higher
For more details refer datasheet.

Digital Insulation Tester - IR4056 - HIOKI
Product Overview

Our Most Popular Model Offering Reading Stability 
In Medium-speed Digital Format
Rated output voltage: 50V DC to 1000V DC
Maximum indicated value: 100MΩ to 4000 MΩ
Lower limit resistance:    0.05MΩ to 1MΩ
Overload protection: 600V AC (10s),660 V AC (10s)
DC voltage range:4.2V to 600V 4 ranges,
Accuracy: ±1.3 % rdg. ±4 dgt. 
Input resistance: 100 kΩ or higher
For more details refer datasheet.

Digital Insulation Tester - IR4057-50 - HIOKI
Product Overview

Our Most Popular Model Offering Reading Stability 
In Medium-speed Digital Format
Rated output voltage: 50V DC to 1000V DC
Maximum indicated value: 100MΩ to 4000 MΩ
Lower limit resistance:    0.05MΩ to 1MΩ
Overload protection: 600V AC (10s),660 V AC (10s)
DC voltage range:4.2V to 600V 4 ranges,
Accuracy: ±1.3 % rdg. ±4 dgt. 
Input resistance: 100 kΩ or higher
For more details refer datasheet.

High Voltage Digital Insulation Tester - IR5050 - HIOKI
Product Overview

Maximum 5kV Test Voltage 
Up to 10 TΩ of Insulation Resistance Testing.
Measurement parameters:Insulation resistance,
Leakage current,Voltage,Capacitance(DD function)
Max. rated voltage to terminals:1000V AC,2000V DC
Temperature and humidity range:-20°C to 50 °C
Dustproof/waterproof:IP40,IP65
Continuous operating time (*2):Approx 5 hours
For more details refer datasheet.

High Voltage Digital Insulation Tester - IR5051 - HIOKI
Product Overview

Measure Solar PV System Insulation Resistance 
Safely and Accurately While Generating.
Maximum 5kV Test Voltage 
Up to 10 TΩ of Insulation Resistance Testing.
Measurement parameters:Insulation resistance,
Leakage current,Voltage,Capacitance(DD function)
Max. rated voltage to terminals:1000V AC,2000V DC
Max. rated voltage to ground: 1000V(CAT IV),600V
For more details refer datasheet.

Electrode Resistance Measurement Systems - RM2610 - HIOKI
Product Overview

Quantify composite layer resistance 
Interface resistance in Li-ion battery electrode sheets
Measurement parameters    Composite resistivity [Ωcm]
Information necessary for computation    
Composite layer thickness [μm] (for 1 side)
Current collector thickness [μm]
Current collector volume resistivity [Ωcm]
Measurement current:1μA(min.) to 10mA(max.)
For more details refer datasheet.

Resistance Hitester - RM3542, RM3542A - HIOKI
Product Overview

Measure in as Fast as 0.9 ms,Optimized for Automated Systems
Resistance range:100mΩ range to 100MΩ range,10 steps
[at Low Power ON] 1000 mΩ range to 1000 Ω range,4 steps
Display:Monochrome graphic LCD 240 × 64 dot,LED backlight
Testing current: 100mA DC to 100nA DC
Open-terminal voltage:20 V DC max.
Sampling rate:FAST, MEDIUM, SLOW,3 settings
Power supply:100 to 240V AC,50/60Hz,30VA max.
For more details refer datasheet.

Resistance HITester - RM3543 - HIOKI
Product Overview

Resistance Meter for Ultra-low and Low Shunt Resistance
Measurement method    Four-terminal, constant-current DC
Resistance range:10mΩ to 1000Ω range,7steps
Display:Monochrome graphic LCD 240 × 64 dot
Measurement accuracy:±0.060 % rdg. ±0.001 % f.s.
Testing current:1A DC to 1mA DC
Open-terminal voltage:20V DC max. 
Sampling rate:FAST,MEDIUM,SLOW,3settings
For more details refer datasheet.

Resistance Meter - RM3545A - HIOKI
Product Overview

New Heights in 100% Inspection.
Market leading precision tests for testing 
every weld or connection on your production line.
Testing current (Measurement current):
High mode: 1000μΩ (1 A) to 1000 MΩ (up to 1 μA)
Low mode: 100 mΩ (100 mA) to 100 Ω (1 mA)
Low power mode (LP): Low power measurement with current 
and open circuit voltage down to 20 mV
LP1000 mΩ (1 mA) to LP1000 Ω (5 μA)
For more details refer datasheet.

Resistance Meter - RM3548 - HIOKI
Product Overview

Portable Resistance Meter Measures from µΩ to MΩ
Resistance range:3mΩ to 3MΩ range,10steps
Measurement accuracy: ±0.020 % rdg. ±0.007 % f.s.
Testing current    : 1A DC to 500nA DC
Open-terminal voltage5.5 V DC max.
Temperature measurement:-10.0 to 99.9°C, 
accuracy: ±0.50°C 
Measurement speed:Fixed
For more details refer datasheet.

Super Megohm Meter - SM7110 - HIOKI
Product Overview

Rapid 6.4ms Super Megohm and Low Current Testing
Number of channels:1 ch
DC current measurement    
20pA range (0.1 fA resolution), 
Accuracy: ±(2.0 % of rdg. +30 dgt.)
200 pA range (1.0 fA resolution),
Accuracy: ±(1.0 % of rdg. +30 dgt.)
2 nA range (10 fA resolution), 
For more details refer datasheet.

Super Megohm Meter - SM7120 - HIOKI
Product Overview

Rapid 6.4ms Super Megohm and Low Current Testing
Number of channels:1ch
DC current measurement    
20 pA range (0.1 fA resolution), 
Accuracy: ±(2.0 % of rdg. +30 dgt.)
200 pA range (1.0 fA resolution), 
Accuracy: ±(1.0 % of rdg. +30 dgt.)
For more details refer datasheet.

Super Megohm Meter - SM7420 - HIOKI
Product Overview

4ch micro current model
perfect for automated-systems integration
Number of channels:4 ch
DC current measurement    
20 pA range (0.1 fA resolution), 
Accuracy: ±(2.0 % of rdg. +30 dgt.)
200 pA range (1.0 fA resolution), 
Accuracy: ±(1.0 % of rdg. +30 dgt.)
2 nA range (10 fA resolution),
For more details refer datasheet.

Insulation Tester - ST5520 - HIOKI
Product Overview

Fastest Insulation Tester Assesses in as Fast as 50ms
Measurement items: Insulation resistance 
Testing voltage    
Measurement range: AUTO/MANUAL setting is possible
25V ≤ V < 100V(2.000/20.00/200.0 MΩ),
100V ≤ V < 500V(2.000/20.00/200.0/2000 MΩ),
500V ≤ V ≤ 1000V(2.000/20.00/200.0/4000 MΩ)
Basic accuracy    ±2 % rdg. ±5 dgt.
For more details refer datasheet.

Leak Current HiTester - ST5540 - HIOKI
Product Overview

Leak Current Measurement, 
An Essential Part of Electrical Safety 
Measurement methods    
Measurement of voltage drop simulated resistance points, 
Calculation and display of current values,True rms,
Measurement unit floats relative to instrument ground.
Measurement modes    
Leak current measurement, voltage measurement, 
safety conductor current measurement
For more details refer datasheet.

Leak Current HiTester - ST5541 - HIOKI
Product Overview

Leak Current Measurement, 
An Essential Part of Electrical Safety
Measurement methods    
Measurement of voltage drop simulated resistance points, 
Calculation and display of current values,True rms,
Measurement unit floats relative to instrument ground.
Measurement modes    
Leak current measurement, voltage measurement, 
safety conductor current measurement
For more details refer datasheet.

Earth Tester - FT6041 - HIOKI
Product Overview

Field-capable, Fast-working
Extensive measurement functionality
Measurement parameters    
Ground resistance measurement:
4-pole, 3-pole, 2-pole,MEC function, 
clamp-on measurement (two clamps)
Soil resistivity measurement: 4-pole method
Ground potential measurement
For more details refer datasheet.

Digital Multi-Range Portable Meters - PM-VAC-5R, PM-VDC-5R, PM-AAC-5R, PM-ADC-5R - MECO
Product Overview

Digital Multi-Range Portable Meters are ideal for 
continuous AC TRMS and DC measurements. 
These precision meters are of Class 0.5 and have a 
backlight display with annunciators for ease of reading.
5 Digits (Except for 750V AC)
0.0001 to 1 Count Resolution (Depending on Range)
1" / 25.4mm Digit Display
Sampling Rate : 3 Samples / Sec
Accuracy : ± (0.5% rdg + 3 dgt)
Maximum Overload :1.2 Times (Continuous)
Polarity Indication :"-"for Negative Input
Power :1.5V 'AA' Battery x 4 pcs
Power :6V DC Adaptor (Optional)
For more details refer datasheet

Digital Multimeter - 63+ - MECO
Product Overview

3½ Digits 2000 Counts Manual Ranging Digital Multimeters
2000 Counts
DC Voltage upto 1000V
AC Voltage upto 750V
DC Current upto 10A
Battery Test (1.5V, 9V)
Resistance upto 2MΩ
Audible Continuity
Diode Test
hFE Test (Transistor Test)
Data Hold
LCD with Backlight
For more details refer datasheet

Digital Multimeter - 101B+ - MECO
Product Overview

3¾ Digits 4000 Counts Autoranging Digital Multimeter
DC Voltage upto 1000V
AC Voltage upto 750V
DC Current upto 10A
AC Current upto 10A
Resistance upto 40MΩ
Capacitance upto 200.0µF
Frequency upto 10.00MHz
Duty Cycle 0.1% ~ 99.9%
Diode Test
Audible Continuity
For more details refer datasheet

Digital Multimeter - 108B+TRMS - MECO
Product Overview

3 Digits 6000 Counts Autoranging Digital Multimeter
DC Voltage upto 1000V
AC Voltage upto 750V
DC Current upto 10A
AC Current upto 10A
Resistance upto 60MΩ
Capacitance upto 9.999mF
Frequency upto 10.00MHz
Duty Cycle 0.1% ~ 99.9%
Temperature
Diode Test
Audible Continuity
For more details refer datasheet

Digital Multimeter - 126B+TRMS - MECO
Product Overview

4 Digits 9999 Counts Auto & Manual 
Ranging Digital Multimeters
DC Voltage upto 999.9V
AC Voltage upto 750.0V
DC Current upto 9.999A
AC Current upto 9.999A
Resistance upto 9.999MΩ
Capacitance upto 9.999mF
Frequency upto 9.999MHz
Duty Cycle 1% ~ 99%
Square Wave Output
Diode Test
For more details refer datasheet

Digital Multimeter - 135B+TRMS - MECO
Product Overview

4 Digit 9999 Count TRMS Autoranging Pocket Size DMM
DC Voltage upto 999.9V
AC Voltage upto 750.0V
DC Current upto 9.999A
AC Current upto 9.999A
Resistance upto 99.99MΩ
Capacitance upto 9.999mF
Frequency upto 9.999MHz
Duty Cycle 1% ~ 99%
Temperature
Diode Test
Audible Continuity
For more details refer datasheet

Digital Multimeter - 603 JUNIOR - MECO
Product Overview

3 Digits 6000 Counts Autoranging DMM
DC Voltage upto 1000V
AC Voltage upto 750V
DC Current upto 10A
AC Current upto 10A
Resistance upto 20MΩ
Diode Test
hFE Test (Transistor Test)
Continuity Test(LED,Buzzer & EF Strength)
NCV (LED, Buzzer & EF Strength)
LCD with Backlight
For more details refer datasheet

Digital Multimeter - 801 JUNIOR - MECO
Product Overview

3 Digits 6000 Counts Autoranging DMM
DC Voltage upto 1000V
AC Voltage upto 750V
DC Current upto 10A
AC Current upto 10A
Resistance upto 60MΩ
Capacitance upto 100.0mF
Frequency upto 10.00MHz
Duty Cycle 1% ~ 99%
Temperature
Diode Test
For more details refer datasheet

Digital Multimeter - 603+ - MECO
Product Overview

3½ Digits 2000 Counts DMM
DC Voltage upto 1000V
AC Voltage upto 750V
DC Current upto 20A
AC Current upto 20A
Resistance upto 200MΩ
Audible Continuity
Diode Test
hFE Test (Transistor Test)
Data Hold
For more details refer datasheet

Digital Multimeter - 9A06 - MECO
Product Overview

3½ Digits 2000 Counts Autoranging DMM
Auto / Manual Ranging,DC Voltage upto 1000V
AC Voltage upto 750V,DC Current upto 10A
AC Current upto 10A
Resistance upto 20MΩ
Temperature
Diode Test
Audible Continuity
Data Hold
LCD Display
For more details refer datasheet

Digital Multimeter - 153B+TRMS - MECO
Product Overview

3 Digits 6000 Counts Autoranging DMM
DC Voltage upto 1000V,AC Voltage upto 750V
DC Current upto 20A,AC Current upto 20A
Resistance upto 60MΩ,Capacitance upto 9.999mF
Frequnecy 10.00MHz,Duty Cycle 0.1% ~ 99.9%
Diode Test
Audible Continuity
Data Hold
LCD with Backlight
Auto Power Off
For more details refer datasheet

Digital Multimeter - 801AUTO - MECO
Product Overview

3¾ Digits 4000 Counts Auto/Manualranging DMM
DC Voltage upto 1000V
AC Voltage upto 750V
DC Current upto 20A
AC Current upto 20A
Resistance upto 40MΩ
Capacitance upto 100µF
Frequency upto 9.999MHz
Duty Cyle 0.1% ~ 99.9%
Temperature
For more details refer datasheet

Digital Multimeter - 171B+TRMS - MECO
Product Overview

3 Digits 6000 Counts Autoranging DMM
DC Voltage upto 1000V
AC Voltage upto 750V
DC Current upto 20A
AC Current upto 20A
Resistance upto 60MΩ
Capacitance utpo 9.999mF
Frequency upto 10.00MHz
Duty Cycle 0.1% ~ 99.9%
LCD with Backlight
Auto Power Off
For more details refer datasheet

Digital Multimeter - 666TRMS - MECO
Product Overview

3 Digits 6600 Counts Autoranging DMM
Auto / Manual Ranging
DC Voltage upto 1000V
AC Voltage upto 750V
DC Current upto 20A
AC Current upto 20A
Resistance upto 60MΩ
Capacitance upto 9.999mF
Frequency upto 10.00MHz
Duty Cycle 0.1% ~ 99.9%
For more details refer datasheet

Digital Multimeter - 450B+TRMS - MECO
Product Overview

4½ Digits 20000 Counts Autoranging DMM
Auto / Manual Ranging
DC Voltage upto 1000.0V
AC Voltage upto 750.0V
DC Current upto 10.000A
AC Current upto 10.000A
Resistance upto 199.99MΩ
Capacitance upto 9.999mF
Frequency upto 9.999MHz
Duty Cycle 1% ~ 99%
Audible Continuity
For more details refer datasheet

Digital Multimeter - 45CF - MECO
Product Overview

4½ Digits 20000 Counts Manual DMM
DC Voltage upto 1000V
AC Voltage upto 750V
DC Current upto 20A
AC Current upto 20A
Resistance upto 20MΩ
Capacitance upto 200µF
Frequency upto 20kHz
hFE Test (Transistor Test)
Infrared Remote Control Check
For more details refer datasheet

Digital Multimeter - 6255 - MECO
Product Overview

Automatic Terminal Blocking Mechanism DMM
3½ Digits 2000 Counts 
DC Voltage upto 1000V
AC Voltage upto 700V
DC Current upto 20A
AC Current upto 20A
Resistance upto 2MΩ
Frequency upto 20KHz
Duty Cycle 1% ~ 99%
Pulse Width 0.1mS ~ 999.9mS
Rotational Speed (RPM)
LCD Display with Backlight
For more details refer datasheet

Clamp Meter - 27-AUTO BL - MECO
Product Overview

3½ Digits 2000 Counts Auto Ranging Clamp Meter
AC Current upto 600A
AC Voltage upto 600V
DC Voltage upto 600V
Resistance upto 20MΩ
Audible Continuity
Diode Test
Backlight Display
Torchlight for Clamp
NCV (LED, Buzzer, EF Strength)
For more details refer datasheet

Clamp Meter - 27T-AUTO BL - MECO
Product Overview

3½ Digits 2000 Counts Clamp Meter
AC Current upto 600A
AC Voltage upto 600V
DC Voltage upto 600V
Resistance upto 20MΩ
Audible Continuity
Backlight Display
Torchlight for Clamp
NCV (LED, Buzzer, EF Strength)
Low Battery Indication
Jaw Opening : Cable Dia. 25mm (max.)
For more details refer datasheet

Clamp Meter - 54+ - MECO
Product Overview

3¾ Digits 4000 Counts TRMS Clamp Meter
AC Current upto 600A
AC Voltage upto 600V
DC Voltage upto 600V
Capacitance upto 4mF
Resistance upto 40MΩ
Audible Continuity
Backlight Display
Torchlight for Clamp
NCV (LED, Buzzer, EF Strength)
Low Battery Indication
Jaw Opening: Cable Dia.30mm (max.)
For more details refer datasheet

Clamp Meter - 72-AUTO BL - MECO
Product Overview

3¾ Digits 4000 Counts TRMS Clamp Meter
AC Current upto 600A
AC Voltage upto 600V
DC Voltage upto 600V
Frequency upto 1MHz
Resistance upto 40MΩ
Audible Continuity
Backlight Display
Torchlight for Clamp
NCV (LED, Buzzer & EF Strength)
Low Battery Indication
Jaw Opening : Cable Dia. 25mm (max.)
For more details refer datasheet

Clamp Meter - 72T-AUTO BL - MECO
Product Overview

3¾ Digits 4000 Counts TRMS
AC Current upto 600A
AC Voltage upto 600V
DC Voltage upto 600V
Frequency upto 1MHz
Resistance upto 40MΩ
Audible Continuity
Backlight Display
Torchlight for Clamp
NCV (LED, Buzzer & EF Strength)
Low Battery Indication
Jaw Opening : Cable Dia. 25mm (max.)
For more details refer datasheet

Clamp Meter - 90+ - MECO
Product Overview

3¾ Digits 4000 Counts TRMS Clamp Meter
AC Current upto 600A
AC Voltage upto 600V
DC Voltage upto 600V
Capacitance upto 4mF
Frequency upto 4KHz
Resistance upto 40MΩ
Audible Continuity
Backlight Display
NCV (LED, Buzzer & EF Strength)
Low Battery Indication
Jaw Opening : Cable Dia. 30mm (max.)
For more details refer datasheet

Clamp Meter - 18 SMART - MECO
Product Overview

3½ Digits 2000 Counts Smart Digital clamp Meter
Auto Selection of ACA, ACV, DCV
AC Current upto 400A (Auto Ranging)
AC Voltge upto 600V (Auto Ranging)
DC Voltge upto 600V (Auto Ranging)
Resistance upto 20MΩ (Auto Ranging)
Data Hold for Resistance & Continuity
Hand Free Operation without Rotary Switch
Tool Kit Friendly Size
Low Battery Indication
Jaw Opening :Cable Dia. 25mm (max.)
For more details refer datasheet

Clamp Meter - DTT266 - MECO
Product Overview

3½ Digits 2000 Counts Digital Clamp Meter
Manual Ranging
AC Current upto 1000A (50Hz ~ 60Hz)
AC Voltage upto 750V (45Hz ~ 450Hz)
DC Voltage upto 1000V
Resistance upto 20KΩ
Over Load Protection
Over Volt Protection
Audible Continuity
Low Battery Indication
Jaw Opening: Cable Dia.53mm (max.)
For more details refer datasheet

Clamp Meter - 2502T-AUTO BL - MECO
Product Overview

3½ Digits 2000 Counts TRMS Digital Clamp Meter
Auto / Manual Ranging
AC Current upto 1000A
AC Voltage upto 750V
DC Voltage upto 1000V
Audible Continuity
Backlight Display
Torchlight for Clamp
NCV (LED, Buzzer & EF Strength)
Low Battery Indication
Jaw Opening : Cable Dia. 52mm (max.)
For more details refer datasheet

Clamp Meter - 2520THZ-AUTO BL - MECO
Product Overview

3 5/6 Digits 6000 Counts TRMS Clamp Meter
AC Current upto 1000A
AC Voltage upto 750V
DC Voltage upto 1000V
Capacitance upto 600µF
Frequency upto 10MHz
Duty Cycle 0.1% ~ 99%
Resistance upto 60MΩ
Backlight Display
Torchlight for Clamp
NCV (LED, Buzzer & EF Strength)
Jaw Opening : Cable Dia. 52mm (max.)
For more details refer datasheet

Clamp Meter - 1008-TRMS - MECO
Product Overview

3 5/6 Digits 6000 Counts TRMS Clamp Meter
AC Current upto 1000A
AC Voltage upto 750V
DC Voltage upto 1000V
Capacitance upto 600µF
Frequency upto 10MHz
Duty Cycle 0.1% ~ 99%
Resistance upto 60MΩ
Backlight Display
Torchlight for Clamp
NCV (LED, Buzzer & EF Strength)
Jaw Opening : Cable Dia. 52mm (max.)
For more details refer datasheet

Clamp Meter - 2250-HZ AUTO - MECO
Product Overview

3¾ Digits 4200 Counts Clamp Meter
AC Current upto 1000A
AC Voltage upto 750V
DC Voltage upto 1000V
Resistance upto 40MΩ
Frequency upto 9.999MHz
Duty Cycle 1% ~ 90%
Audible Continuity
Auto Power Off
Low Battery Indication
Jaw Opening : Cable Dia.55mm (max.)
For more details refer datasheet

Clamp Meter - 36-AUTO BL - MECO
Product Overview

3 5/6 Digits 6000 Counts TRMS clamp Meter
AC Current upto 600A
DC Current upto 600A
AC Voltage upto 600V
DC Voltage upto 600V
Capacitance upto 60mF
Frequency upto 1MHz
Duty Cycle 0.1% ~ 99.9%
Resistance upto 60MΩ
Torch Light for Clamp
NCV (LED, Buzzer & EF Strength)
Low Battery Indication
Jaw Opening : Cable Dia. 25mm (max.)
For more details refer datasheet

Clamp Meter - 99+ - MECO
Product Overview

3 5/6 Digits 6000 Counts TRMS Clamp Meter
AC Current upto 600A
DC Current upto 600A
AC Voltage upto 600V
DC Voltage upto 600V
Capacitance upto 100mF
Frequency upto 100KHz
Duty Cycle 0.1% ~ 99.9%
Resistance upto 60MΩ
Torch Light for Clamp
NCV (LED, Buzzer & EF Strength)
Jaw Opening : Cable Dia. 30mm (max.)
For more details refer datasheet

Clamp Meter - 3690 AUTO - MECO
Product Overview

3¾ Digits 4000 Counts Clamp Meter
Auto / Manual Ranging
AC Current upto 600A
DC Current upto 600A
AC Voltage upto 600V
DC Voltage upto 600V
Resistance upto 40MΩ
Frequency upto 500KHz
Duty Cycle 1% ~ 90%
Δ Zero Button (for DCA)
Low Battery Indication
Jaw Opening : Cable Dia. 30mm (max.)
For more details refer datasheet

Clamp Meter - 3600+ - MECO
Product Overview

3¾ Digits 4200 Counts Clamp Meter
DC Voltage upto 1000V
AC Voltage upto 750V
DC Current upto 1200A
AC Current upto 1000A
Resistance upto 40MΩ
Capacitance upto 40µF
Frequency upto 9.999MHz
Duty Cycle 10% ~ 90%
Audible Continuity
Auto Power Off
Low Battery Indication
Jaw Opening : Cable Dia. 55mm (max.)
For more details refer datasheet

Clamp Meter - 1080-TRMS - MECO
Product Overview

3-5/6 Digits 6000 Counts TRMS Clamp Meter
Auto / Manual Ranging
DC Voltage upto 1000V
AC Voltage upto 750V
DC Current upto 1200A
AC Current upto 1200A
Resistance upto 60MΩ
Capacitance upto 9.999mF
Frequency upto 10MHz
Duty Cycle 0.1% ~ 99.9%
Auto Power Off
Low Battery Indication
Jaw Opening : Cable Dia. 30mm (max.)
For more details refer datasheet

Clamp Meter - 2003A+ - MECO
Product Overview

3½ Digits 1999 Counts Clamp Meter
Auto & Manual Ranging
AC & DC Current upto 2000A
AC & DC Voltage upto 2000V
Resistance upto 20MΩ
Audible Continuity
Inrush Current
Backlight Display
Torchlight for Clamp
Auto Power Off
Low Battery Indication
Jaw Opening : Cable Dia. 55mm (max.)
For more details refer datasheet

Analog Insulation Tester - MC-900 SERIES / MC-900BA SERIES - MECO
Product Overview

Ideal for Insulation Resistance Measurement 
Single Person Push Button Operation
High Accuracy ± 5% of Indicated Value in Effective Range
Scale Length :80 mm (approx)
Terminal Voltage:> 85% of Rated Voltage for Insulation Resistance
Measurement from 10% to 100% of the Insulation Resistance Range
ABS Resin Yellow Case with Polycarbonate Meter Front Cover
Meets Requirement of IEC 61010, Installation Category II,
Designed to Generally Confirm to IS 10656-1983
7 Models with various Voltage to MOhm Ranges
Battery Adaptor (Optional) for MC-900BA Series
For more details refer datasheet

Digital Insulation Tester - DIT99BL SERIES / DIT99BL-BA SERIES - MECO
Product Overview

3½ Digit 15mm LCD Display with Backlight
High Voltage LED Indication
Provision for Using Battery Adaptor
High Accuracy (±3% rdg + 2 dgt)
5 Models with various Voltage and MOhm Ranges
Single Person Push Button Operation
Designed to Generally confirm to IS 10656 - 1983
Meets Requirements of IEC 61010, Installation Category II,
Terminal Voltage more than 85% of rated Voltage for 
Insulation Resistance Measurement from 10% to 100% 
of the Insulation Resistance Range
Battery Adaptor (Optional) for DIT99BL-BA Series
For more details refer datasheet

Digital Insulation Tester - DIT918 - MECO
Product Overview

2.5kV - 20G Digital Insulation Tester 
3½ Digit 1999 Count Large LCD Display
High Accuracy for Insulation Measurement
Range Selection & Single Person Push Button Operation
LCD with Indicator Switch
Data Holding Function, Function Icons on Display
Measurement of AC Voltage upto 600VAC
Auto Range (Insulation Test)
Red LED Indicator for HV (High Voltage)
As per Safety Standard IEC / EN 61010-1 & 61010-31
As per EMC Standard IEC 61326 Class B
For more details refer datasheet

Digital Insulation Tester - DIT 954 - MECO
Product Overview

5KV - 200GOHM Digital Insulation Tester 
3½ Digit 1999 Count Large LCD Display
Range Selection & Single Person Push Button Operation
LCD with Green Backlight Function with Indicator Switch
Data Holding Function
Display with Annunciators
Measurement of AC Voltage upto 600VAC
Auto Range (Insulation Test)
Red LED Indicator for HV (High Voltage)
Inbuilt Protection Circuit to prevent Reverse Voltage
Battery Operated with AC Adaptor
Suitable for Calculating PI & DAR (Manually)
For more details refer datasheet

Digital Insulation Tester - DIT 954-6R - MECO
Product Overview

3½ Digit 1999 Count Large LCD Display
6 Ranges : 100V,250V,500V,1000V,2500V,5000V DC
LCD with Green Backlight
Data Holding Function
Display with Annunciators
Auto Range (Insulation Test)
Red LED Indicator for HV (High Voltage)
Inbuilt Protection Circuit to prevent 
the harm of reverse Voltages
Battery Operated with AC Adaptor
For more details refer datasheet

LCR Meter - LCR 999A - MECO
Product Overview

Field maintenance test & external carrying test
Fixation point on production line or mobile checkout
Warehouse & real time spot or batch inspection
Basic measurement accuracy 0.1% & speed upto 10 meas / sec
Large LCD display with bright white backlight
Ultra low power consumption,
battery powered for 24 hours of continuous use
Automatic identification function (Ai).
Percentage display & 4 tolerance comparator:1%,5%,10% & 20%
9V battery & External power supply
For more details refer datasheet

Battery Capacity Tester/Battery Meter - ABM18 - MECO
Product Overview

MECO ABM18 is a portable Automobile Battery Tester 
which can check the capacity condition of different
types of Motorcycle and Motorcar batteries from 2 to 200Ah. 
The product consists of a Load Resistor and Testing Clip.
The state of the battery is indicated on the meter dial as 
'FULLUP' (White), 'NORMAL' (Green),'RECHARGE' (Yellow), 
'DISCHARGE' (Red) directly.
Rated Voltage of Battery to be Tested : 2, 6, 12V DC
Rated Capacity of Battery to be Tested : 2 - 200Ah
Dimensions : 225 x 124 x 68mm (approx)
For more details refer datasheet

Battery Capacity (Impedance) Tester - 6363 - MECO
Product Overview

Battery Capacity (Impedence) Tester for Batteries upto 500Ah
Memory & Read Function
Right Device to know the TRUE -LIFE of Battery Capacity
(Resistive / Voltage) Simultaneously Measure
On - Line Testing without shutting down battery
Built - in Comparator Function
Rates Conditions as PASS, WARNING or FAIL
Datalogging Memory Function
Compact and lightweight
RS-232 Interface & Software
Auto Power Off
For more details refer datasheet

Battery Capacity(Impedance) Tester - 6390 - MECO
Product Overview

Battery Capacity (Impedence) Tester with DC 
Current Adaptor for Batteries upto 1200Ah
Memory & Read Function
Right Device to know the TRUE -LIFE of Battery Capacity
(Resistive/Voltage/Current & Temperature) Simultaneously
On-Line Testing without shutting down battery
Built-in Comparator Function
Measure Battery Charge / Discharge Capacity (Ah)
Measure Battery State of Charge SOC (%)
Rates Conditions as PASS, WARNING or FAIL
Auto Datalogging Micro SD Card 4GB upto 99 Blocks
Compact and lightweight
USB Interface & Software
For more details refer datasheet

Vehicle Battery System Meter - VBSM6246 - MECO
Product Overview

Meco VBSM6246 is a Vehicle Battery System Meter 
Display of Battery Condition [Good/Ok/Pay Attention/Replace] 
Overload Protection to ensure Operator Safety
Loose Lead Detection 
Reverse Polarity Protection
Internal Unit Conversion CCA/IEC/EN/DIN
Battery Recharge Indicator, 
Detects and Display Bad Cell
CCA Range : 100 ~ 1700
IEC Range : 100 ~ 1000
EN Range : 100 ~ 1700
For more details refer datasheet

Leakage Current Tester - 4671 - MECO
Product Overview

Meco 4671 is a Leakage Current Tester 
10µA Ultra High Resolution
Large Conductor Diameter(30mm)
AC Current in 5 Ranges(40mA,400mA,4A,40A,60A)
Wide Frequency Response(40Hz-1KHz)
ACA, ACV, Ω and Continuity
Large 3¾ Digit LCD (4000 Count)
40 Segment Fast Bargraph Display (20 times/sec.)
Data Hold and Max / Min Hold
Relative Measurement
600 Vrms Overload Protection in Resistance Range
For more details refer datasheet

Leakage Current Tester - 4671A - MECO
Product Overview

Meco 4671A is a Leakage Current Tester 
10µA Ultra High Resolution
Large Conductor Diameter (30mm)
AC Current in 4 Ranges (20mA, 200mA, 2A, 60A)
Wide Frequency Response (40Hz-400Hz)
AC A, AC V, DC V
Large 3½ Digit LCD (1999 Count)
Data Hold
Low Battery Indication
Auto Power Off
For more details refer datasheet

Clamp On Earth Tester - 4680BL / 4680BLC - MECO
Product Overview

Meco 4680BL/4680BLC is a Clamp On Earth Tester
Non Contact Ground Resistance Measurement
No Auxiliary Electrodes Needed
Data Storing Memory
Data Hold, Noise Signal
Ground Resistance Measurement 0.01Ω ~ 1000Ω
Suitable for Earthing Strip of 65mm x 32mm
Leakage Current (0.5mA ~ 30.00A)(Model : 4680BLC)
Auto Ranging
Continuity Loop Test
For more details refer datasheet

Clamp On Earth Tester - 4680 / 4680B - MECO
Product Overview

Meco 4680/4680B is a Clamp On Earth Tester
Non Contact Ground Resistance Measurement
No Auxiliary Electrodes Needed
Recording 116 Sets of Memory
Ground Resistance Measurement 0.025Ω ~ 1500Ω
Suitable for Ground Wire upto ø23mm(Model :4680)
Suitable for Ground Wire upto ø34.5mm(Model :4680B)
Leakage Current (0.300mA ~ 30.00A)(Model :4680)
Leakage Current (0.300mA ~ 35.00A)(Model :4680B)
Programmable Data Logging
Continuity Loop Test
For more details refer datasheet

Transformer Turn Ratio Meter - TTR 8100 - MECO
Product Overview

TTR8100 ensures the Correct Turn Ratio and Quality of the Transformer.
Measurement of 1 Φ and 3 Φ Transformer/VT/CT Turns Ratio
VT/PT Ratio 0.8~2000,Ct Raio 0.8~2000
Ten Test Frquencies (50 ~ 400 Hz)
9 Types of 3 Φ Winding Connection pre - installed
Wireless Blue Tooth Communication with PC
Select Filter to Remove Field noise (Slow, Normal, Fast)
Record with Date and Time Stamp
Powerful Lithium Battery (3400mAH) with built-in Charging Circuit
PC Application Software Included
For more details refer datasheet

Digital Lux Meter - 930T - MECO
Product Overview

930T is a Digital LUX Meter with Flexible Sensor
Functions: MAX / MIN, Backlight, Auto Power Off
with Disable Feature, Data Hold
Range: 0.1 ~ 200,000 lux
Accuracy: ±3% + 30 dgt
Resolution: 0.1 lux or 0.1 fc
Power: 1.5V AAA x 2 Batteries
Dimensions: 157x54x34mm(approx.)
Weight: 70gms Including Battery(approx.)
Accessories: Carrying Case, Inst. Manual,
1.5V AAA x 2 Batteries (installed)
For more details refer datasheet

Digital Lux Meter - 930P - MECO
Product Overview

930P is a Digital LUX Meter 
Functions: MAX/MIN,Backlight,Auto Power Off
Range : 0~200,000 lux/0~20,000 fc
Accuracy : ±5% rdg + 10dgt 
(<10.000 lux / fc) ± 10% rdg + 10 dgt 
Resolution : 0.1 lux or 0.1 fc 
Selection : lux / fc
Power : 9 V Battery
Dimensions:190 x 56 x 39mm (approx.)
Weight: 135gms Including Battery (approx.)
Accessories: Carrying Case,Inst.Manual,
9V Battery (installed)
For more details refer datasheet

Digital Lux Meter - 930K - MECO
Product Overview

930K is a Digital LUX Meter 
Lux: 20.00K ~ 200.0K
Spectral Measurement Range: 320~730nm
Unit: Lux / Fc
Auto Ranging 
MIN/MAX, Data Hold
Backlight
Auto Power Off 
Low Battery Indicator 
Weight : 110gms Including Battery(approx.)
Dimension : 155 x 40 x 40mm (approx.)
For more details refer datasheet

Infrared Thermometer - FT3700, FT3701 - HIOKI
Product Overview

Non-contact Infrared Thermometer
Sharply Focus on Measurement Spots with 
Two-Beam Laser Marker,Ideal for HVAC Applications
Measurement temperature range:-60.0˚Cto550.0˚C,0.1˚C
Response time:1 sec (90%)
Measurement wavelength:8 to 14 µm
Thermal emissivity compensation:ε=0.10 to 1.00
Sighting:Two-beam laser marker Max 1 mW (class 2),Red
For more details refer datasheet.

Infrared (Body / Forehead) Thermometer - BT-99 - MECO
Product Overview

Precise non-contact measurements
Body Temperature Measuring Range
36°C ~ 42.9°C (97°F ~ 109°F)
Body Temperature Measuring Accuracy
± 0.3°C (± 0.6°F)
Surface Temperature Measuring Range
0~100°C (32 ~ 212°F)
Reduces risk of virus spread
Fast response (0.5 Sec.)
34 Measuring Data can be stored
For more details refer datasheet.

Infrared (Body / Forehead) Thermometer - MBT-99 - MECO
Product Overview

MBT-99 is a Infrared (Body/Forehead) Thermometer 
Handheld
Precise non-contact measurements
Measures temperature from distance
Reduces risk of virus spread
Body Temperature Measurements
Surface Temperature Measurements
Fast response (5 sec.)
32 Measuring Data can be stored
LCD display with Green,Orange and Red backlights 
For more details refer datasheet.

Industrial Infrared Thermometer - IRT1050P - MECO
Product Overview

IRT1050P Is A Industrial Infrared Thermometers 
Range: -50°c~1050°C/-58°F~1922°F
Distance Spot Ratio :50:1
Emissivity: 0.10~1.00(Adjustable)
C° / F° Selection
Auto Power Off
Low Battery Indication
Backlight Display
MAX,MIN,DIF,AVG Function
Data Storage
High/Low Temperature Alarm Setting
For more details refer datasheet.

Industrial Infrared Thermometer - IRT600TC - MECO
Product Overview

IRT600TC Is A Industrial Infrared Thermometers 
Range: -50°C ~ 600°C/-58°F ~ 1112°F
Distance Spot Ratio : 12:1
Emissivity : 0.1 ~ 1.0 (Adjustable)
°C / °F Selection
Laser Switch
Auto Power Off
Low Battery Indication
Backlight Colour Display
For more details refer datasheet.
 

Digital Multimeter - RISH Max 10 - RISHABH
Product Overview

RISH Max-10 digital multimeters are suited for 
universal, general applications in the electrical 
and electronics fields, as well as in radio and 
television service, training and education
Relative measurement (REL)
Automatic/manual measuring range selection 
Temperature Measurement: range 0°C to +1300°C. 
Overload warning
AC voltage>750V,DC Voltage>1000V, 
AC/DC mA current>400.0mA,AC/DC current>10.00A. 
Protective cover for rough operating conditions 
For more details refer datasheet.

Digital Multimeter - RISHABH 410 - RISHABH
Product Overview

RISHABH 410 digital multimeter is suited for universal, 
general applications in the electrical and electronics 
fields for training and education. 
Functionally Enhanced Dual Display
Digital Display with 3¾ Digit, 4000 Count
0.5% basic DC accuracy
Direct and alternating voltages from 100μV...1000V
Direct and alternating currents from 10μA...10.00A
Resistance from 1Ω...40.00MΩ 
Capacitance from 1pF...200.00 microF 
Diode measurement and continuity testing
Temperature measurement with K type Thermocouple
For more details refer datasheet.
 

Digital Multimeter - RISHABH 612 - RISHABH
Product Overview

RISHABH 612 digital multimeter is suited for universal, 
general applications in the electrical and electronics 
fields for training and education. 
Direct and alternating voltages from 100μV ... 1000V
Direct and alternating currents from 10μA ... 10.00A
Resistance from 1Ω... 60.00MΩ.
Capacitance from 1pF ... 40.00 mF with zero correction
Frequencies from 10.00Hz ... 10MHz
Diode measurement and continuity testing
Duty cycle (%) measurement
Temperature measurement with K type Thermocouple
For more details refer datasheet.

Digital Multimeter - RISHABH 613 - RISHABH
Product Overview

RISHABH 613 digital multimeter is suited for universal, 
general applications in the electrical and electronics 
fields for training and education. 
Direct and alternating voltages from 100μV ... 1000V
Direct and alternating currents from 10μA ... 10.00A
Resistance from 1Ω... 60.00MΩ.
Capacitance from 1pF ... 40.00 mF with zero correction
Frequencies from 10.00Hz ... 10MHz
Diode measurement and continuity testing
Duty cycle (%) measurement
Temperature measurement with K type Thermocouple
For more details refer datasheet.

Digital Multimeter - RISHABH 615 - RISHABH
Product Overview

RISHABH 615 digital multimeter is suited for universal, 
general applications in the electrical and electronics 
fields for training and education. 
Direct and alternating voltages from 100μV ... 1000V
Direct and alternating currents from 10μA ... 10.00A
Resistance from 1Ω... 60.00MΩ.
Capacitance from 1pF ... 40.00 mF with zero correction
Frequencies from 10.00Hz ... 10MHz
Diode measurement and continuity testing
Duty cycle (%) measurement
Temperature measurement with K type Thermocouple
For more details refer datasheet.
 

Digital Multimeter - RISHABH 616 - RISHABH
Product Overview

RISHABH 616 is a rugged,TRMS,Enhanced dual display, 
6600 count, portable multimeter, 
a perfect tool for wide range of applications.
Direct and alternating voltages from 100μV ... 1000V
Direct and alternating currents from 10μA ... 10.00A
Resistance from 1Ω... 60.00MΩ.
Capacitance from 1pF...40.00mF with zero correction
Frequencies from 10.00Hz ... 10MHz
Diode measurement and continuity testing
Temperature measurement with K type Thermocouple
Peak value measurement.
For more details refer datasheet.

Digital Multimeter - Rishmulti 14 S - RISHABH
Product Overview

Rishmulti 14 S is Analog Digital Multimeter 
which measures VAC, VDC,VAC+DC,Frequency,
mA DC, mA AC+DC,Resistance, continuity, 
Diode,Farad,AC current measurement.
Automatic Terminal Blocking System (ABS)
Interface and Software RISH com 100
MIN/MAX Value Storage
Indication Of Negative Values On The Analog Scale
Automatic Data Hold
Auto-ranging / Manual Range Selection
For more details refer datasheet.

Digital Multimeter - Rish MIT30 - RISHABH
Product Overview

RISH MIT 30 is Analog Digital Multimeter 
with insulation resistance measurement , 
which measures VAC, VDC, VAC+DC,Frequency,
mA DC, mA AC+DC,Resistance, continuity, 
Diode,Farad,AC current measurement with clip-on 
sensor and insulation resistance measurement.
Insulation resistance measurement up to 3G .
Route mean square value with distorted wave form.
AC Current measurement with clip-on sensor
This permits resting for short circuit and open circuit. 
AUTO and MANUALranging modes.
For more details refer datasheet.

Digital Multimeter - Rishmulti 12 S - RISHABH
Product Overview

Rishmulti 12 S is Analog Digital Multimeter  
which measures VAC, VDC,VAC+DC,Frequency,
mA DC, mA AC+DC,Resistance, continuity, 
Diode,Farad,AC current measurement.
Automatic Terminal Blocking System (ABS)
Interface and Software RISH com 100
MIN/MAX Value Storage
Indication Of Negative Values On The Analog Scale
Automatic Data Hold
Temprature Management
Auto-ranging / Manual Range Selection
For more details refer datasheet.

Digital Multimeter - Rishmulti 13 S - RISHABH
Product Overview

Rishmulti 13 S is Analog Digital Multimeter  
which measures VAC, VDC,VAC+DC,Frequency,
mA DC, mA AC+DC,Resistance, continuity, 
Diode,Farad,AC current measurement.
Automatic Terminal Blocking System (ABS)
Interface and Software RISH com 100
MIN/MAX Value Storage
Indication Of Negative Values On The Analog Scale
Automatic Data Hold
Temprature Management
Auto-ranging / Manual Range Selection
For more details refer datasheet.

Digital Multimeter - Rishmulti 15 S - RISHABH
Product Overview

Rishmulti 15 S is Analog Digital Multimeter  
which measures VAC, VDC,VAC+DC,Frequency,
mA DC, mA AC+DC,Resistance, continuity, 
Diode,Farad,AC current measurement.
Automatic Terminal Blocking System (ABS)
Interface and Software RISH com 100
MIN/MAX Value Storage
Indication Of Negative Values On The Analog Scale
Automatic Data Hold
Temprature Management
Auto-ranging / Manual Range Selection
For more details refer datasheet.

Digital Multimeter - Rishmulti 16 S - RISHABH
Product Overview

Rishmulti 16 S is Analog Digital Multimeter  
which measures VAC, VDC,VAC+DC,Frequency,
mA DC, mA AC+DC,Resistance, continuity, 
Diode,Farad,AC current measurement.
Automatic Terminal Blocking System (ABS)
Interface and Software RISH com 100
MIN/MAX Value Storage
Indication Of Negative Values On The Analog Scale
Automatic Data Hold
Temprature Management
Auto-ranging / Manual Range Selection
For more details refer datasheet.

Digital Multimeter - Rishmulti 20 - RISHABH
Product Overview

RISH Multi 20 Multimeter is 5 ¾ digit 
high performance precision instruments for 
laboratory use,as well as for service and training. 
Convenient Triple Display
High Resolution & Precision
RMS Value with Distorted Waveshape
Additional Functions
Overload Protection
Measuring Category
Automatic Blocking Sockets (ABS)
Backlit Display
For more details refer datasheet.

Digital Multimeter - Rishabh 6012/6013/6015/6016 Bluetooth - RISHABH
Product Overview

The new 6012/6013/6015/6016 Bluetooth multimeter 
is advanced instrument meeting the needs of today’s
technology with a Bluetooth communication and 
Android based application for mobile phones, 
so now all the data is made available on your mobile screen.  
Data logger & View function (up to 32000 readings–6016,6015) 
Bluetooth Connectivity with Mobile via android App & PC
Data logging facility in mobile and setting of 
parameters via mobile through App.
100kHz bandwidth for voltage measurement (6016)
1kHz Low Pass Filter mode (6013, 6015, 6016)
GO-NO-GO function
VAC with 1MOhm impedance 4-20mA/0-20mA scale type measurement
Single fuse for mA & A 
For more details refer datasheet.

Digital Multimeter - RISHABH 6012 - RISHABH
Product Overview

The Rishabh 6012 is a digital multimeter 
with an AC voltage range of 6V to 1000V. 
It's designed for professional use and offers safety,
high resolution, and reliability. 
True RMS Digital Multimeter
Plug and Play USB connectivity with PC
GO-NO-GO function
Temperature measurement with Pt100 & Pt1000 sensors
External power adapter for long hours of measurements
Current measurement through external Clamps
Conductance Measurement
For more details refer datasheet.
 

Digital Multimeter - RISHABH 6013 - RISHABH
Product Overview

The RISHABH 6013 new multimeter is made for
professional use that offers safety, high resolution, 
large range count,reliability, ruggedness, 
a complete tool for test automation and is 
equipped with Direct current measurement upto 16A  
True RMS Digital Multimeter
Plug and Play USB connectivity with PC
Temperature measurement with J, K sensors
External power adapter for long hours of measurements
Current measurement through external Clamps
Frequency / Time Period Measurement
Direct current measurement upto 16A
For more details refer datasheet.

Digital Multimeter - RISHABH 6015 - RISHABH
Product Overview

The RISHABH 6015 new multimeter is made 
for professional use that offers safety, 
high resolution,large range count,reliability,
ruggedness, a complete tool for test automation
and is equipped with more than 30 different
measuring functions alongwith data logging facility 
& plug and play USB for connection with PC 
Data logger & View function (up to 32000 readings)
Plug and Play USB connectivity with PC
VAC with 1MOhm impedance 4-20mA/0-20mA scale type
Temperature measurement with J,K,Pt100 & Pt1000 
External power adapter for long hours of measurements
For more details refer datasheet.

Digital Multimeter - RISHABH 6016 - RISHABH
Product Overview

The RISHABH 6016 new multimeter is made 
for professional use that offers safety, 
high resolution,large range count,reliability,
ruggedness, a complete tool for test automation
and is equipped with more than 30 different
measuring functions alongwith data logging facility 
& plug and play USB for connection with PC 
Data logger & View function (up to 32000 readings)
Plug and Play USB connectivity with PC
VAC with 1MOhm impedance 4-20mA/0-20mA scale type
Temperature measurement with J,K,Pt100 & Pt1000 
External power adapter for long hours of measurements
For more details refer datasheet.
 

Digital Multimeter - Rishabh Young / iYoung - RISHABH
Product Overview

The new Rishabh Young/iYoung Multimeter are compact,
Handy & Trendy multimeters specially targeted 
for applications of Electrical contractors,
Direct and alternating voltages from 100μV ... 1000V
Direct and alternating currents from 10μA ... 10.00A
Resistance from 1Ω... 60.00MΩ.
Capacitance from 1pF ... 40.00 mF with zero correction
Frequencies from 10.00Hz ... 10MHz
Diode measurement and continuity testing
Duty cycle (%) measurement
Temperature measurement with K type Thermocouple
Peak value measurement.
For more details refer datasheet.
 

Clamp Meter - RISH Clamp ES 400/1000 AC - RISHABH
Product Overview

RISH Clamp ES1000 AC/ES400 AC is a highly innovative design 
for features those increases safety and comfort of user.
Large Jaw Opening
Narrow Body
High Accuracy for low current measurement
User selectable Backlit
Temperature measurement
AUTO POWER OFF
Relative Measurement
Hold Function
Hz / Duty
NULL ZERO Correction for Resistance
For more details please refer datasheet.

Clamp Meter - Rish Clamp 300/1000A AC - RISHABH
Product Overview

Rish clamp 1000A/300A is a highly innovative design 
for features those increases safety and comfort of user.
Large Jaw Opening
Narrow Body
High Accuracy for low current measurement
User selectable Backlit
Temperature measurement
AUTO POWER OFF
Relative Measurement
Hold Function
Hz / Duty
NULL ZERO Correction for Resistance
For more details please refer datasheet.

Clamp Meter - RISH Clamp 1000A/300A AC/DC - RISHABH
Product Overview

RISH Clamp 1000A/300A AC/DC is a highly innovative design 
for features those increases safety and comfort of user.
Large Jaw Opening
Narrow Body
High Accuracy for low current measurement
User selectable Backlit
Temperature measurement
Auto Power Off
Continous On Mode
DATA Hold Function 
MIN,MAX Function
NULL ZERO Correction for Resistance
For more details please refer datasheet.

Clamp Meter - RISH Clamp Power 1000A/400A AC/DC - RISHABH
Product Overview

RISH Clamp POWER 1000A/400A measures, 
calculate and displays important electrical parameters
of single phase or three phase power system. It also 
features Resistance, continuity, diode 
and non contact voltage detection
AC&DC Voltageupto1000V
AC&DCCurrent upto 1000A/400 A
Inrush/Peak ValueMeasurement
Active,Reactive andApparentPower
Horse PowerMeasurement
Measure up to49thHarmonics
PhaseAngle
For more details please refer datasheet.

Smart Leakage Clamp Meter - ALCT 66A AC - RISHABH
Product Overview

Agam ALCT 66 A is a high-accuracy 
high sensitivity leakage current clamp meter 
Suitable for applications in Utilities,Railways, 
Communication industry,Oil fields,Building wiring Segment,
Processing industries, etc
Compact size leakage clamp meter  
Current measurement from 1µA to 60A 
Large jaw opening 
Data storage facility upto 99 records 
Complies with CE, CAT protection
Software facility for reportsrmonics
For more details please refer datasheet.

Smart Leakage Clamp Meter - ALCT 606A AC - RISHABH
Product Overview

Agam ALCT 606A AC is a high-accuracy 
high sensitivity leakage current clamp meter 
Suitable for applications in Utilities,Railways, 
Communication industry,Oil fields,Building wiring Segment,
Processing industries, etc
Compact size leakage clamp meter  
Current measurement from 0.1mA to 600A 
Large jaw opening 
Data storage facility upto 99 records 
Complies with CE, CAT protection
Software facility for reports
For more details please refer datasheet.

Smart Leakage Clamp Meter - ALCT 60A AC/DC - RISHABH
Product Overview

ALCT 60A is designed for on-line measurement 
of AC/DC leakage current, which adopts latest 
CT and digital integration technology.
Lean clamp is suitable for cables such as,
automation panels, control panels, electric metering system, 
high-speed rail system, automobile circuit maintenance . 
Compact size leakage clamp meter for easy portability
Current measurement from 1mA to 60A AC/DC
Data storage facility upto 99 records
Complies with CE, CAT protection
Software facility for online reports generation
For more details please refer datasheet.

Clamp Meter - Rish Clamp Solar - RISHABH
Product Overview

RISH Clamp SOLAR has DC voltage measurement upto 1500V DC, 
to measure inverter input voltage at solar power plants 
and current measurement upto 1500 A  AC/DC.
Measurement range upto 1500V DC to check solar inverter input voltage
Extended current range upto 1500A AC (Trms)/DC for 
measurement at high current carrying applications
Patented trigger at back side so as to keep a 
safe distance from loads and offer operational efficiency
Double mould casing to offer higher grip while holding the meter
Consists of AC voltage upto 1000V (Trms), resistance, continuity,
capacitance, frequency, diode, duty cycle, temperature, etc.
Complies with CE, IP 50, CAT IV 600V protection
For more details please refer datasheet.

Digital Insulation Tester - Rish HVT 5kV AC - RISHABH
Product Overview

The Rish HVT 5kV AC offers a 5kV test voltage to determine 
the withstand strength of electrical insulation for 
the normally occurring over voltage transients.
Voltage range up to 5kV AC for testing various devices
Selectable current range up to 50/100mA to offer testing
Safety features - Zero start interlock, Overload protection, 
L&N reversal protection, Earth Open protection, 
HT ON alarm to ensure user safety while testing
Rugged design to work well in harsh industrial environments
Compact size with unique design & good ergonomics, 
making it user-friendly like never before
For more details please refer datasheet.

High Voltage Digital Insulation Tester - ITHV Series - Polycarbonate Body - RISHABH
Product Overview

ITHV series is a high voltage portable Insulation Tester 
used to measure the insulation for cables, motors, electrical 
wiring and other devices capable of carrying the rated voltage.
Rugged design to withstand industrial environment
Polycarbonate body with collapsible handle
In-built hand-driven brushless AC generator 
and static rectifier to supply Stabilized DC voltage
Guard terminal to eliminate surface leakage current
Cross coil movement, sintered anti-friction bearings 
and delrin-moulded gears ensures trouble free operation
Option 1 : Single Voltage, single IR measurement range
Option 2 : Dual Voltage, dual IR measurement range
For more details please refer datasheet.

Low-Voltage Multi Range Insulation Tester - ITMR Series - Polycarbonate Body - RISHABH
Product Overview

ITMR series is a low voltage multi range portable 
Insulation Tester which offers the measurement of 
insulation in transformers,motors,generators,domestics appliances.
Housed with robust Polycarbonate material case 
which offers high ruggedness to instrument
In-built hand-driven brushless AC generator and 
static rectifier to supply Stabilized DC voltage 
Guard terminal to eliminate surface leakage current 
Cross-coil movement, sintered anti-friction bearings, 
and Delrin-moulded gears ensure trouble-free operation
66mm logarithmic scale confirms to IS 2992-1987   
World Class Aesthetics, for better user experience
For more details please refer datasheet.

Low-Voltage Insulation Tester - ITI Series-Polycarbonate Body - RISHABH
Product Overview

ITI series is a low voltage insulation tester 
which is best suited for Measurement of the 
insulation resistance on electrical equipment 
and system under test upto 1000V
For testing motors,transformers,generators,switch gears
For testing house hold appliances
Measurement of insulation of cables for on-site 
maintenance and service departments.
Rugged design to withstand industrial environment
Polycarbonate body with collapsible handle
Guard terminal to eliminate surface leakage current
66mm logarithmic scale confirms to IS 2992-1987
For more details please refer datasheet.

Digital Insulation Tester - Rish Insu 10Dx+ - RISHABH
Product Overview

Rish INSU 10Dx+ is designed to perform at power utilities 
where induction field is very high. Its high noise immunity
and user selectable digital filters makes it most robust and 
reliable instrument with user selectable test voltages.
Selectable short circuit current 1.2mA, 3mA and 6mA 
Test voltage can be selected in steps of 10V from 
100V to 1000V & in steps of 25V from 1000V to 10000V
Insulation resistance measurement upto 20T Ω
User selectable digital filters
Operates on rechargeable Li-ion battery and Mains as well 
Bluetooth connectivity for data logging
For more details please refer datasheet.

Digital Insulation Tester - RISH Insu 5Dt - RISHABH
Product Overview

Rish Insu 5Dt is a 5KV Digital Insulation Tester
with selectable test voltage upto 5KV and 
Insulation Resistance measurement upto 2 TΩ.
Selectable SC current i.e 1.2mA and 3mA
User selectable digital filters
Operates on rechargeable Li-ion battery and Mains as well 
Bluetooth  or USB connectivity for data logging
Touch screen TFT colour Display
Insulation leakage current measurement
PI, DAR, Step voltage & Ramp Test
Three programmable timers
For more details refer datasheet.

Digital Insulation Tester - RISH Insu 5Dx+ - RISHABH
Product Overview

Rish Insu 5Dx+ is a Digital Insulation Tester 
with selectable test voltage upto 5kV and 
Insulation Resistance measurement upto 10 TΩ.
Selectable short circuit current 1.2mA, 3mA and 6mA 
User selectable digital filters
Operates on rechargeable Li-ion battery and Mains as well 
Bluetooth connectivity for data logging
Touch screen TFT colour display
Test voltage can be selected in steps of 
10V from 100V~1000V & in steps of 25V from 1000V~5000V
Measurement of DC and AC voltages from 20V~600V
Insulation leakage current measurement
PI, DAR, DD, Step voltage & Ramp Test
For more details refer datasheet.
 

Low Voltage Polycarbonat Body Insulation Tester - ITS-Series - RISHABH
Product Overview

ITS series is a low voltage portable Insulation Tester. 
They are suitable for the measurement of
insulation resistance of LT Transformers,Motors, 
Generators,Domestics appliances,domestic,industrial wiring,cables.
Rated Voltages: 500V, 1000V; Insulation Resistance: 100MΩ, 200MΩ
Option ITC: Continuity measurement (0 to 5KΩ)
The compact instrument offers easy portability
Self-powered (hand crank generator) instrument
Easy to rotate generator with self-lubricating molded gears 
and oil impregnated bushes to eliminate mechanical maintenance
Product design and performance in compliance to IS:2992
World Class Aesthetics, for better user experience
For more details Please refer datasheet.

Smart Digital Insulation Tester - AIT 501 - RISHABH
Product Overview

Agam AIT 501 is the compact insulation resistance tester
with diagnostic features like PI, DAR. 
Robust unit : Ideal for portable testing
Test voltages of 500V,1000V,2500V and 5000V  
Insulation Resistance measurement upto 1 TOhm 
Automatic(PI),Dielectric Absorption Ratio (DAR)
DC/AC voltage measurements to 600V 
To check live voltages if any present in DUT
Autoranging insulation resistance tester 
Auto shut down when left idle & Optional Operation on Mains via adapter
Datalogging capabilities and USB interface 
Wide LCD with backlit screen, Analog bar graph (30 segment) 
For more details please refer datasheet.

Analog Insulation Tester - ITMR- Series - RISHABH
Product Overview

ITMR series is a low voltage multi range 
portable Insulation Tester which offers 
the measurement of insulation in transformers,
motors, generators,or domestics appliances.
Rugged design to withstand industrial environment
Metal body with collapsible Steel handle
In-built hand-driven brush less AC generator
and static rectifies to supply Stabilized DC voltage
Guard terminal to eliminate surface leakage current
Cross coil movement, sintered anti-frtiction bearings 
and delrin-moulded gears ensures trouble free operation
For more details please refer datasheet.

Low-Voltage Analog Insulation Tester - ITI Series - RISHABH
Product Overview

ITI Series is a low voltage insulation tester 
which is best suited for Measurement of the 
insulation resistance on electrical equipment 
and system under test upto 1000V, For testing motors, 
transformers, generators, switch gears
For testing house hold appliances
Measurement of insulation of cables for on-site 
maintenance and service departments.
Rugged design to withstand industrial environment
Metal body with collapsible Steel handle
In-built hand-driven brushless AC generator 
Guard terminal to eliminate surface leakage current
For more details refer datasheet.

High-Voltage Insulation Tester - ITHV_Series - RISHABH
Product Overview

ITHV Series is a high voltage portable Insulation Tester 
used to measure the insulation for cables, motors, electrical
wiring and other devices capable of carrying the rated voltage.
Rugged design to withstand industrial environment
Cross coil movement, sintered anti-friction bearings 
and delrin-moulded gears ensures trouble free operation
66mm logarithmic scale confirms to IS 2992-1987
Option 1 : Single Voltage, single IR measurement range
Option 2 : Dual Voltage, dual IR measurement rangeotors, t
Metal body with collapsible Steel handle
In-built hand-driven brushless AC generator 
Guard terminal to eliminate surface leakage current
For more details please refer datasheet.

Insulation Tester - RISH Insu 5000 A/AK/M/R - RISHABH
Product Overview

This instrument is suited for the non-destructive measurement of
insulation resistance in electrical systems, at machines and
transformers and in cables, as well as within the electrical
equipment of, for example, locomotives, tram systems and ocean
going vessels, with eight selectable test voltages up to 5kV.
Broad measuring range from 10KOhm to 1TOhm
Test voltages: 100V,250V,500V,1000V,1500V,2000V,2500V,5000v
Measurement to 2000V in accordance with DIN VDE 0413
Measuring range : 100kOhm to 100MOhm (1000V)
Voltage measurement to 2000V 
Guard Terminal eliminates surface current
For more details please refer datasheet.
 

Analog-Digital Insulation Tester - RISH Insu-20 - RISHABH
Product Overview

RISH Insu 20 Digital Insulation and Continuity Tester 
is suitable for following 
Measurement of the insulation resistance on electrically 
dead equipment and systems with test voltages up to 1000V.
For testing motors, transformers, generators, switchgears.
For testing of house hold appliances.
Measurement of the insulation resistance of cables.
Very useful for on-site maintenance and service departments.
Analog + Digital Display (Log scale for Insulation Measurement)
User Selectable Backlit Display 
Connector jack for External Mains Adapter (Optional)
Test Voltages 50V/100V/250V/500V/1000V
For more details please refer datasheet.

Analog-Digital Insulation Tester - Rish Insu-10 - RISHABH
Product Overview

RISH Insu10 Analog-Digital Insulation 
and Continuity Tester is suitable for following
Measurement of the insulation resistance on electrically dead 
equipment and systems with test voltages up to 1000V.
For testing motors, transformers, generators, switchgears.
Measurement of the insulation resistance of cables.
Very useful for on-site maintenance and service departments.
Analog + Digital Display (Log scale for Insulation Measurement)
User Selectable Backlit Display 
Battery Operated
Test Voltages 50V/ 100V/ 250V/ 500V/ 1000V
For more details please refer datasheet.
 

Smart Digital Earth Tester - AET 23 - RISHABH
Product Overview

The Agam earth tester, AET 23 is capable of 
performing measurements of both earth resistance
in ohms and also calculates AC earth voltage from 0-200V.
Earth resistance testing can be performed across three ranges
0-20 Ohms , 0-200 Ohms and 0-2000 Ohms.
AET 23 is equipped with limited built-in 
memory that can store up to 20 testing results. 
This earth resistance tester is also 
suitable for use on both 50Hz and 60Hz
Industrial Earth Resistance Testing
Substation Earth Resistance Testing 
Earth Voltage Testing
For more details please refer datasheet.

Smart Earth Clamp Tester - AECT 12 - RISHABH
Product Overview

AECT 12 Clamp Earth Resistance Tester is widely used
in the grounding resistance measurement of the
Ulies (Generaon, Transmission, Distribuon),
Telecommunicaons, Meteorology, the industrial and
electrical equipment, etc.
No need for auxiliary electrodes for measurement of 
earth resistance in grounding system with loop
Wide earth resistance measurement up to 1500Ω
Internal data logging up to 99 readings for analysis
Wide jaw size of 65x32mm to fit in different conductors/earthing strips
Alarm function with sound and light indication for pass/fail test
For more details please refer datasheet.

Analog Earth Tester - ET-Series - RISHABH
Product Overview

ET series are the portable Earth Testers 
for measurement of earth resistance and soil resistivity.
The compact design allows the use in
industrial as well as household application.
Confirms to IS 9223-1989
Sintered anti-friction bearing provide smooth
and maintenance free operation
Powered by built in hand operated generator
Direct reading of earth resistance in Ohms
Rugged and sturdy instruments suitable for field application
Housed with robust polycarbonate material case 
which offers high ruggedness to instrument
For more details please refer datasheet.
 

Digital Panel Meter - RISH EINE NX - RISHABH
Product Overview

The Digital meter PROGRAMMABLE RISH Eine NX have
been designed for industrial application ,which frequently
require precise and on-site adjustment of the display range. It
can be used in industrial automation and for laboratory uses.
Attractive look with two touch keys.
3 digit or 4 digit ultra bright 7 Segment LED display.
Fast & Easy Installation on panel with click fit arrangement
Ultra bright LED Display
On site programmable PT parameters
On site programmable CT parameters
Enclosure Protection for dust and water
For more details please refer datasheet.
 

Onsite programmable Digital Panel Meter - RISH DPM Hz - RISHABH
Product Overview

RISH DPM Hz measures important electrical parameters
like Frequency & RPM. 
True RMS measurement:
Measures distorted waveform up to 15th Harmonic.
RPM Measurement: 
The instrument display Rotation per minutes for 
generator applications. Number of poles can be set 
digits Ultra Bright LED display: 
Display range upto 9999.
Enclosure Protection for dust and water: 
Conforms to IP 50 (front face) as per IEC60529
For more details please refer datasheet.

Programmable DC Voltmeter - Rish Eine+ - RISHABH
Product Overview

RISH Eine+ has been designed for industrial applications,
which frequently require precise and on-site adjustment 
of the display range. It measures electrical DC parameters 
like DC voltage and DC current.
Low Back Depth
Rescalable Display range
Function keys
Bent Characteristics
Power Factor Display
Ambient Temperature Indication
Auxillary Supply
4 Full digits Ultra Bright LED display
For more details please refer datasheet.

Programmable Digital Panel Meter - Rish EINE - RISHABH
Product Overview

The digital panel meters RISH Eine DPM 
have been designed for industrial  applications, 
which  frequently  require  precise  and on-site  
adjustment  of  the  display  range.
we can used in industrial automation and for laboratory uses.
RISH Eine DPM measures important electrical parameters in 3 phase 
4 Wire,  3 phase  3 Wire and single phase Network & 
replaces the multiple analog panel meters.
Fast & Easy Installation on panel with the help of
external swivel screws.
User selectable CT/PT Secondary.
4 Digits ultra bright LED Display
For more details please refer datasheet.
 

Programmable DIgital Panel Meter - N30B - RISHABH
Product Overview

N30U is a 5-Digit 3 coloured LED display meter 
programmable as interval or limit in 3 ranges 
through PD14 programmer/ LPConfig software. 
Universal programmable input and outputs RS485, 
Analog & Relay output.
IP10 - from Terminal Side
IP65 - from Frontal Side,
3-colour display (14 mm height),programmable in 3
ranges of the displayed value.
21-point individual characterisƟc(indicaƟon rescaling)
For more details please refer datasheet.

Programmable Digital Meter - N32H - RISHABH
Product Overview

N32H meter is a Programmable digital meter 
of destined for DC Circuit parameters.
It has a modern and easy-to-read LCD display 
with universal measuring input and inbuilt RS-485 digital output
Voltage measurement ±600V (maximum range display ±1200 v), 
current measurement via shunt, power, 
energy and capacity measurement of d.c. circuits
Two-line LCD display with high contrast 
For more details please refer datasheet.

Advanced Universal Input Digital Meter - N30U - RISHABH
Product Overview

The N30U meter is destined for the measurement 
of temperature, resistance and standard signals
Resistance thermometers: PT100, PT500, PT1000
Thermocouples: J, K, N, E, R, S
Resistance: 400 ohm,4000 ohm
Current: ± 20 mA
Voltage: 0…10 V, -10…60 mV
Output: relay (4),analog (1),digital RS-485/MODBUS(1),
For more details please refer datasheet.

63A Direct Input Digital Meter - N27P - RISHABH
Product Overview

N27P fulfils the requirements for devices 
mounted in standard modular switchgears.
Universal measuring input:
1/5 A 100/400 V AC
32/63 A, 100/400 V AC
Direct measurement (up to 63A),
Output:
RS-485 interface with MODBUS protocol,
1 x relay + 1 x analog or 2 x relay,
Modern graphical display in OLED technology,
Programmable current and voltage transformer ratios,
Meter configuration using button or free eCon software
For more details please refer datasheet.

Advanced AC Input Digital Meter - N30P - RISHABH
Product Overview

N30P meter is designed to measure
AC voltage,AC current,active, reactive 
and apparent power, cos φ, tg φ, φ, 
frequency, active, reactive and apparent energy, 
15 min. active power, 10 min. voltage, 10 sec. 
frequency in single-phase power network.
Highlighted measuring units
4 alarm outputs with signalling by LED diodes, 
For more details please refer datasheet.

Advanced DC Input Digital Meter - N30H - RISHABH
Product Overview

The N30H meter is destined for the measurement 
of DC current and DC voltage up to 5 A and 600 V.
The device fulfils the requirements of installation's
category III for the product designed.
Parameters which can be reprogrammed:
Display colour, individually in three intervals,
Thresholds of displayed overflows,
Precision of displayed results (decimal point),
For more details please refer datasheet.

Digital Panel Meter - N25 Series - RISHABH
Product Overview

The N25 Series Designed for measurement of d.c.voltage 
or d.c. current,temperature through Pt100 
resistance thermometers,J, K thermocouples, 
a.c. voltage and a.c. current.
5 LED digit displays with 14 mm digit high.
Parameters programmable by PD14 programmer:
precision of displayed results (decimal point),
measurement averaging time,
recounting of indications (individual characteristic),
automatic or manual compensation: cold junction 
temperature for measurement with thermocouples or 
wire resistance for measurement with Pt100 (N25T).
For more details please refer datasheet.

Digital Meter with Bargraph - NA5PLUS - RISHABH
Product Overview

NA5PLUS comes with Single Channel input 
and NA6PLUS comes with dual Channel. 
These Bar-graph meters ensure high measurement 
accuracy and clear visualization of the measurements done
3 or 7-colour bargraph with programmable colour switching over.
Logging of the measured signal in porgramed time intervals 
Universal measuring input.
Programmable indication characteristic and bargraph magnifier.
Up to 8 programmable alarm outputs.
Arithmetical functions x2, √x.
Communication in Scada systems (rS485/modbus interfaces).
For more details please refer datasheet.

Advanced Pulse / Rotation / Period Input Digital Meter - N30O - RISHABH
Product Overview

The N30O meter is destined for the measurement of pulses, 
frequency, rotational speed, period and worktime. 
The meter has 2 counter inputs to co-operate with an encoder. 
The meter counts also the actual and total value.
Input:
Number of pulses
Rotational speed
Output:relay(4),analog(1),digital RS-485/MODBUS(1)
For more details please refer datasheet.
 

63A Direct Input Digital Meter - N27D - RISHABH
Product Overview

The  N27D fulfils the requirements for devices 
mounted in standard modular switchgears. 
Designed for measurement of RMS current and voltage (AC), 
active power and frequency. Thanks to modern design,
Direct measurement up to 63A,
Switched measured value,
4-digit display in yellow colour,
Backlighted indicator of measured value,
Modern design allows for installation of the meter 
in modular switchgear in accordance with EN 62208
(meter has a width of 3 modules) on 35 mm rail.
External dimensions: 53 x 110 x 60mm.
For more details please refer datasheet.
 

OLED Display Digital Meter - N21 - RISHABH
Product Overview

N21 is an ideal solution for visualisation of industrial processes.
Universal input, universal supply and modern 
OLED display allow to apply meter in many applications.
Relay alarm output.
Universal supply voltage from 24 V up to 230 V AC/DC
Supply of object transducers 24 V DC
Meter configuration through mini-USB 
connector with free eCon software.
For more details please refer datasheet.

Digital Meter for DC Parameters - N20 - RISHABH
Product Overview

The N20 meter is a digital programmable panel instrument
designed for measurements of DC voltages, 
DC currents or temperature. 
Parameters of the N20 meter:
DC current: 0/4...20mA; ±20mA
DC voltage: 0...60mV; 0...10V; ±10V
Protection level ensured by the housing: IP65,
Readout field: 5 three-colour LED displays of 14 mm height,
For more details please refer datasheet.

Digital Panel Meter - N24 Series - RISHABH
Product Overview

Indicators of N24 series are designed for measurement 
of DC voltage or DC current, temperature from PT100 sensors 
and J, K thermocouples, AC voltage and AC current.
4-digit LED display, digits of 20 mm high,
Possible configuration of parameters through 
the PD14 programmer and the free delivered eCon Software
Precision of displayed results (decimal point),
Measurement averaging time,
Recounting of indications (individual characteristic),
Automatic or manual compensation: temperature of 
cold junction for measurements with thermocouples 
or wire resistance for Pt100 sensors (N24T),
For more details please refer datasheet.

4½ Digit DC Ammeter/Volt Meter (72 X 144mm) - RISH DPM - RISHABH
Product Overview

The digital panel meters RISH DPM 72 x 144 4½ Digit 
have been designed for industrial applications, 
which frequently require precise and on-site adjustment
of the display range. It can be used in industrial 
automation and for laboratory uses.
Highly adaptable DPMs suitable for a wide
range of measuring applications.
For more details please refer datasheet.

4 1/2 Digit DC Ammeter/Volt Meter - Rish DPM xDC (48x96/96x96) - RISHABH
Product Overview

The Digital panel meters RISH DPM 96 x 96 & 48 x 96 
4½ Digit have been designed for industrial applications,
which frequently require precise and 
on-site adjustment of the display range.
Industrial automation and for laboratory uses.
Auxiliary power supply :
AC: 1) 230V (+10% / -15%).
    2) 110V (+10% / -15%).
DC: 1) 110V (+10% / -15%).
    2) 24V (+/- 15%).
Highly adaptable DPMs suitable for a 
wide range of measuring applications.
For more details please refer datasheet.

4 1/2 digit 1 - Rish DPM ACx (72x144) - RISHABH
Product Overview

The digital panel meters RISH DPM 72 X 144 1 PH. 
4½ ACI/ACV have been designed for industrial applications, 
which frequently require precise and on-site adjustment 
of the display range. It can be used in 
Industrial automation and for laboratory uses.
AC Current ranges and AC Voltage ranges available.
4 ½ Digit ultra bright Display with 26mm digit height.
For more details please refer datasheet.
 

Digital Panel Meter - RISH DPM Power / Power Factor - RISHABH
Product Overview

RISH DPM 72X144 series measures system active Power 
(Import / Export),Reactive Power (Import / Export),
Apparent Power &Power Factor of Three phase and 
Single phase Network. It has 4 digit single line 
auto ranging LED display with polarity indication.
On site programmable PT/CT ratios
For more details please refer datasheet.

Digital Panel Meter - RISH DPM Power / Power Factor(96x96) - RISHABH
Product Overview

RISH DPM Power 96x96 series measures system active Power
(Import / Export), Reactive Power (Import / Export),
Apparent Power & Power Factor of Three phase and 
Single phase Network. It has 4 digit single 
line auto ranging LED display with polarity indication
Product Range
Active Power (kW) DPM.
Reactive Power (kVAr) DPM.
Apparent Power (kVA) DPM.
Power Factor (PF) meter.
On Site Programmable PT/CT Ratios 
User Selectable CT Secondary 5A/1A
For more details please refer datasheet.

Compact VAF Meter - RISH CD30/60 - RISHABH
Product Overview

RISH CD30/60 Compact VAF Meter measures electrical
parameters in 1 Phase Network for AC direct current
measurement application. 
% THD measurement upto 15th Harmon
True RMS measurement.
2 Line 4 digits ultra bright LED display
Direct current measurement upto 30/60 A depending on model
Fast & Easy Installation on housing with self clicking
For more details please refer datasheet.
 

Multi-Function Digital Panel Meter - RISH OPTIMA VAF - RISHABH
Product Overview

RISH OPTIMA VAF measures important electrical parameters 
in 3 phase 4 Wire, 3 phase 3 Wire and 1 phase Network 
& replaces the multiple analog panel meters. 
It measures electrical parameters like AC Voltage, 
AC Current, Frequency & many more. 
The instrument also has an optional limit switch
True RMS measurement
Onsite programmable
Limit Switch (Optional)
3 line 3 digits Ultra Bright LED display
Run Hour, ON Hour, Number of Interruptions
Storage of Parameters possible
Parameter Screen recall
For more details please refer datasheet.

Programmable Digital Panel Meter - Rish Delta VAF NX - RISHABH
Product Overview

RISH Delta VAF measures important electrical parameters 
in 3 phase 4 wire, 3 phase 3 wire, 1 phase 2 wire 
and 1 phase 3 wire (split-phase) network. I
True RMS Measurement
3 Line, 4 Digit Ultra-bright LED display
Reliable and accurate measurement
Wide-range AC / DC auxiliary power supply  
On site programmable PT/CT ratios
Limit Output (Optional)
MODBUS (RS485) Output (Optional)
Display of minimum and maximum values
Password-protected setup mode
Low back depth-27mm
For more details please refer datasheet.

Multi Channel DC Energy Meter - Rish EM DC 6001 / 6002 - RISHABH
Product Overview

Single meter measures energy consumption of four
independent loads connected to one Voltage source
Event Logging
Data Logging
Load Profile Analysis
Direct Remote Access (optional)
Parameter Screen recall
4 - line 8 digit Ultra-bright LED Display
Reverse Locking
Onsite Configuration
Relay Functions
Enclosure Protection for dust and water
Compliance to International Safety standards
For more details please refer datasheet.

Programmable Energy Meter - RISH EM 1320/30/40 - RISHABH
Product Overview

RISH EM series measures important electrical parameters 
in 3 phase and single phase Network & replaces 
the multiple analog panel meters. It measures electrical 
parameters like Active/Reactive/Apparent energy,power  
Energy billing
Electrical load monitoring
Sub-metering
Genset, Test Benches and Laboratories
True RMS measurement:
Measures distorted waveform up to 15th Harmonic.
For more details please refer datasheet.

Programmable Dual Source Energy Meter - RISH EM 2340DS - RISHABH
Product Overview

RISH EM 2340DS is Dual Source Energy Meter 
which measures important electrical parameters 
of Utility and Generator in 3 phase and single phase 
network & replaces the multiple analog panel meters. 
This energy meter is on-site programmable and can 
measure more than 65 parameters including 
Active/Reactive/Apparent energy,Power,Total 
Harmonic Distortion (THD) measurement among others. 
True RMS measurement 
Energy as per IEC 62053
Onsite programmable
Direct remote access(Optional)
Limit (Alarm) or Pulse Relay Output(Optional) 
Configurable Error Diagnosis Mode 
For more details please refer datasheet.

Multifunction Meter - RISH LM 1340 - MECO
Product Overview

RISH LM1340 measures important electrical parameters 
in 3 phase 4wire,3 phase 3wire and 1phase 2wire Network. 
It displays many parameters at a glance. 
It measures electrical parameters like 
Active/Reactive/ Apparent energy and all basic parameter. 
The instrument has two optional digital outputs available 
as pulse or alarm with programmable pulse duration and width.
This instrument also has two optional digital inputs for 
monitoring the external contact status, pulse counting 
and/or energy accumulation according to tariff.
Complaince of IEC 61557-12
Energy Measurement as per IEC 62053-22 / 23
Load Health Monitoring OV,UV,OC,UF,Unb. V/I, PF, PR
For more details please refer datasheet.

Multifunction Power Meter - RISH ML 1400 / ML 1410 - RISHABH
Product Overview

The RISH ML 1400 is a multifunction power meter
that can monitor and measure electrical parameters. 
It has an accuracy class of 0.5 and can be used 
for Class 1 or Class 0.5s applications.
Multiple circuit monitoring
Plug and play current transformer
Health monitoring of three phase load
Residual current monitoring and tripping
Prepaid tariff based tripping
Quick, easy, and error free current connections
Measures real time electrical parameters
Pulse output which can be used to drive an external
For more details please refer datasheet.

Energy Meter - Rish ED1100 - RISHABH
Product Overview

RISH ED1100 is a modern Energy Meter 
designed for intended use in residential, 
commercial and light industrial Electrical Energy Metering.
DIN Mounted Energy meter-Energy measurement
as per IEC 62053-21,23,IEC 61557-12,EN 50470-3 Class B
Direct Connected Energy meter with self powered
On display indication-Digital Input/Output 
Pulse outputs configurable for 
Import/Export Energy measurement 
Digital Inputs–Tariff Energy Accumulation· 
Optional SO Pulse output for energy
application along with 1 Digital Input 
For more details please refer datasheet.

Current/Voltage Transducer - Con I/Con V - RISHABH
Product Overview

The RISH CON-V/RISH CON-I is used to measure 
and convert AC Voltage or Current input into 
an proportional DC current or voltage output signal. 
Output signal generated is proportional to the root
mean square value of the input Current or Voltage.
Analog Output (Single or dual)
Isolated analog output which can be set onsite 
to either voltage or current output. 
Programmable Input/Output
Onsite transducer can be programmed using front key 
& display or through programming port or through RS 485.
For more details please refer datasheet.

Frequency Transducer - Rish Con Hz - RISHABH
Product Overview

The Rish CON-Hz transducer is used for frequency measurement. 
The output signal is proportional to measured frequency 
and is either load independent DC Current 
or load independent DC Voltage
Fully onsite programmable input range
Available in Single or Dual output type
Onsite selectable output type.(DC current/DC voltage) 
Accuracy class 0.2 ( IEC / EN 60688)
l RS 485(Modbus) Communication (Optional)
l Connection Terminal : Conventional Screw type
l Seven Segment LCD Display (Optional)
For more details please refer datasheet.

Power Transducer - Rish Con P - RISHABH
Product Overview

The Rish CON-P transducer is used to measure
and convert active,reactive,apparent power,Phase 
angle & Power Factor of a Single-phase or 
Three-phase AC system with balanced or unbalanced 
load into a proportional load independent DC current
or voltage output signal.
Onsite selectable output type(DC current / DC voltage)
Accuracy Class 0.2 (IEC / EN 60688) for Power
On Site Configurable as Active/Reactive/Apparent Transducer
/Phase Angle/Power Factor
Seven Segment LCD Display (Optional)
For more details please refer datasheet.

Programmable Multi-function Transducer - Rish CON M+ - RISHABH
Product Overview

RISH CON-M+ transducer is used to measure 
and convert parameters of a single-phase or 
three-phase AC system with unbalanced or 
balanced load into a proportional load 
independent DC current or DC voltage
output signal.
4-in-1 programmable transducer
Fully onsite programmable Input: 
PT&CT ratio,Output: DC Current/Voltage
Upto 4 Isolated Analog & 2 Relay Output
True RMS and THD measurement upto 31st Harmonics
For more details please refer datasheet.

Programable Multifunction Transducer - Mxx Series - RISHABH
Product Overview

The RISH Ducer MXX series of multi-transducers 
simultaneously measure several variables of an 
electric power system and process them to produce 
2 or 3 or 4 analogue output signals. 2 or 4 digital
outputs are available for signaling limits or power
metering. For two of the limit outputs up to 3 
measurands can be logically combined.
For all heavy-current power system variables
Up to 6 outputs (2A + 4D or 4A + 2D or 2A or 3A
Input voltage up to 693 V (phase-to-phase)
Universal analogue outputs (programmable)
Provision for either snapping the transducer onto top
hat rails or securing it with screws to a wall or pan
For more details please refer datasheet.

Multi Transducer - Rish CON M-40/ M-04/ M-22 - RISHABH
Product Overview

The RISH CON-M transducer is used to measure 
and convert parameter of Three-phase 3W/4W 
AC power network with balanced/unbalanced system.
True RMS measurement.
4-in-1 programmable transducer
Programmable parameters through the RS-485 interface
or USB when using the free eCon configuration software
Fast and easy installation on DIN RAIL or onto a wall or 
ina panel using optional screw hole bracket
Connection Terminal: Conventional Screw type
Detection and signaling of incorrect phase sequence.
For more details please refer datasheet.

Dual Output Transducer - Rish CON CA /CON CV - RISHABH
Product Overview

The transducer RISH CON-CA/CV converts a sinusoidal  
AC Current or AC Voltage into a load independent 
DC Current or a load independent DC Voltage 
proportional to the measured value.
AC Voltage/ Current input signal,sine wave.
Auxiliary Power Supply
Accept any input between 40...300 V AC/DC
Analog Output
Isolated analog output, which can be Voltage or Current.
LED Indication
LED indication for power ON.
For more details please refer datasheet.
 

Current Transformers with Transducer - Rish CT Ducer - RISHABH
Product Overview

Current Transformers With Transducer 
for the measurement of AC current. 
Rish CT Ducer a very reliable, efficient 
and robust current transformer for measurement 
of AC current. It provides 4 to 20 mA
Single device serves functionality of both current
transformer as well as transducer
Measurement of AC current for frequency 50/60Hz 
,Provides proportional 4 - 20 mA or 0-20 mA DC output
High output load resistance up to 1000 ohm
True RMS and Average type models
For more details please refer datasheet.
 

Programmable Single output DC Isolator - RISH PI-101 - RISHABH
Product Overview

The purpose of the RISH PI-101 is to electrically 
isolate input, output and power supply. 
The isolator fulfills all requirements 
and regulation concerning electromagnetic 
compatibility EMC and safety.
User programmable using DIP Switches
Response time < 50 msec
Accuracy Class - 0.2
Auxiliary Supply - 60-300 V AC/DC
                 - 20-40 V AC /20-60 V DC
LED  provided for status indication
For more details please refer datasheet.

Isolating Amplifier Unipolar/Bipolar - Rish ducer TV808 - RISHABH
Product Overview

The purpose of the RISH Ducer TV 808  is to 
electrically insulate input and output signals, 
respectively to amplify and/or change the signal 
level or type (current or voltage) of the input signals.
252 standard input and output combinations 
selected by soldered jumpers
User - specific input and /or output ranges
Isolating amplifier with one input two 
electrically insulated outputs.
Power supply 24 ... 60 V DC/AC or 85 ... 230 V DC/AC
please request our data sheet TV 808 - 11 Le 
For more details please refer datasheet.

Programmable Tap Position Transducer - RISH CON TPT - RISHABH
Product Overview

Tap position transducer RISH CON TPT 
coverts resistance to proportional 
analogue output signal. The purpose of the 
Tap position transducer is to convert tap position
of transformers to equivalent analogue output. 
Outputs can be given as input to either 
RTU or indicator or recording instrument.
Input measuring range can be programmed using 
PC/Simplifies project planning and engineering 
(the final range can be determined during commissioning).
Electrically isolated Dual out puts.
Tap number is programmable from 1 to 101 using software.
For more details please refer datasheet.

Programmable Universal Transmitter - Rish Ducer V604 - RISHABH
Product Overview

The universal transmitter RISH Ducer V 604 
converts the input variable–a DC current or voltage, 
or a signal from a thermocouple,resistance thermometer, 
remote sensor or potentiometer – to a 
proportional analogue output signal.
Input variable (temperature, variation of resistance,DC
signal) and measuring range programmed using PC /
Simplifies project planning and engineering (the final
measuring range can be determined during commissioning).
Short delivery times and low stocking levels
Electric insulation between measured variable,analogue output
signal and power supply / Safe isolation acc. to EN 61 010
For more details please refer datasheet.

Configurable Transmitter - Rish ducer PT602 - RISHABH
Product Overview

The Transmitter RISH Ducer PT 602 
Converts the input variable-a signal from 
a resistance thermometer Pt 100- to a 
temperature linear output signal.
The analogue output signal is either an impressed
current or superimposed voltage which is processed 
by other devices for purposes of displaying, 
recording and / or regulating a constant.
Non - Standard user - specific ranges available
Red LED's indicator : an open or short - circuit.
Electric isolation between input & output 2.3 kV and 
power supply & all other circuits 3.7kV-Fulfils EN 61 010.
For more details please refer datasheet.

Challenger Series Panel Meters - 361, 362, 363 and 364 - RISHABH
Product Overview

The Challenger range of Analog Panel meters 
offer accurate measurement and indication 
of most electrical and electronic parameters 
in industry standard 1½”, 2½”, 3½” and 4½”case sizes. 
This innovative design features a detachable lower 
fascia plate which allows the flexibility of 
either surface or window mounting. 
Surface or window mounting.
Rear zero adjuster on moving coil meters.
High torque pivot and jewel movement.
True RMS measurement meters.
For more details please refer datasheet.

Moving - Iron Meter - AC ammeters and voltmeters 90deg (EQ) - RISHABH
Product Overview

The moving iron-panel meters,EQ 48/72/96/144 housed 
in moulded polycarbonate cases are suitable 
for the measurement of AC currents and voltages 
in the usual frequency range of 15...100Hz.
Scale interchangeability.
Near linear scale.
Glass filled polycarbonate housing. (UL 94 V-0)
Easy installation with swivel screws.
Knife edge pointer.
Easily replaceable glass and bezel
For more details please refer datasheet.

Moving Coil Meter - DC Ammeters and Voltmeters 90deg(PQ) - RISHABH
Product Overview

All Rishabh meters are housed in robust 
case with classical finish. 
The case is made of polycarbonate, 
which is flame retardant and non-drip 
and confirms to international regulations 
UL 94 V-0. Polycarbonate is a very tough 
and light weight engineering plastic material 
which has got the best mechanical properties 
very close to a metallic housing. 
Easy installation with swivel screws.
For more details please refer datasheet.

Moving Coil Meter - AC ammeters and voltmeters with rectifier 90deg (VQ) - RISHABH
Product Overview

All Rishabh meters are housed in robust 
case with classical finish. 
The case is made of polycarbonate, 
which is flame retardant and non-drip 
and confirms to international regulations 
UL 94 V-0. Polycarbonate is a very tough 
and light weight engineering plastic material 
which has got the best mechanical properties 
very close to a metallic housing. 
Easy installation with swivel screws.
Easily replaceable glass and bezel
For more details please refer datasheet.

Analogue Pointer - Frequency meter 90deg (ZQ) - RISHABH
Product Overview

All Rishabh meters are housed in robust 
case with classical finish. 
The case is made of polycarbonate, 
which is flame retardant and non-drip 
and confirms to international regulations 
UL 94 V-0. Polycarbonate is a very tough 
and light weight engineering plastic material 
which has got the best mechanical properties 
very close to a metallic housing. 
Easy installation with swivel screws.
Easily replaceable glass and bezel
For more details please refer datasheet.

Analog Panel Meter - Vibrating Reed frequency meter (FQ) - RISHABH
Product Overview

The reed type frequency meters,FQ 72/96 housed 
in moulded polycarbonate cases are suitable 
for the measurement of frequencies 
in the range of 45 to 65 Hz. 
These instruments offer several advantages 
in switchboard and Generating Set Panels. 
Number of meters can be mounted in a 
single Cut out (Mosaic mounting). 
Front glass, Bezel & Dial can be easily replaced.
Easy installation with swivel screws.
Glass filled polycarbonate housing(UL 94 V-0)
For more details please refer datasheet.

Power Factor meter 90deg - CQ 72/96/144 - RISHABH
Product Overview

The moving coil indicators CQ 72/96/144 
and a phase angle adjuster are used to
monitor changing power factor conditions 
on ir-reversible balanced load systems
&amp; Unbalanced System.
These instruments offer several advantages 
in switchboard and Generating Set Panels. 
Number of meters can be mounted in a 
single Cut out (Mosaic mounting). 
Front glass, Bezel & Dial can be easily replaced.
Easy installation with swivel screws.
For more details please refer datasheet.
 

Power Meter 90deg - WQ 96/144 - RISHABH
Product Overview

The Watt meters, WQ96/144 are offered for the AC systems
-single phase
-3 phase balanced load 3 or 4 wire
-3 phase unbalanced load 3 or 4 wire
These instruments are suitable to indicate forward(export/
out going) and reverse (import/in coming) power flow.They
can be used both on sinusoidal and non-sinusoidal current
These meters offer several advantages in Switchboard and
Generating Set panels. Number of meters can be mounted in
a single Cut out (Mosaic Mounting).The Bezel, Front window
glass and Dial can be easily replaced
For more details please refer datasheet.

Maximum Demand Ammeters - BIQ 48/72/96 / BIEQ 72/96 - RISHABH
Product Overview

The maximum demand ammeters BIQ 48/72/96/BIEQ 72/96
housed in moulded polycarbonate cases,monitor 
the most economic use of transformer stations 
& LT distribution feeders by indicating
the thermal/ time characteristics of the load.
Knife edge pointers.
Terminal protection with click-fitting back cover
Easily replaceable glass and bezel.
Near linear scale for MI scale in BIEQ.
User accessable reset Knob. 
For more details please refer datasheet.
 

Moving Coil meter - DC ammeters and voltmeters 240deg(PL) - RISHABH
Product Overview

The moving coil panel meters, PL 48/72/96/144 
housed in moulded polycarbonate cases 
are suitable for the measurement of DC
Glass filled polycarbonate housing (UL 94-V-0)
Terminal protection with click-fitting back cover
Easily replaceable glass and bezel.
Near linear scale for MI scale in BIEQ.
Better resolution.
Knife edge pointer.
User accessable reset Knob. 
For more details please refer datasheet.
 

Moving Coil Meter - AC ammeters and voltmeters with rectifier 240deg (VL) - RISHABH
Product Overview

The moving coil,rectifier panel meters,VL 72/96/144 
housedin moulded polycarbonate cases are suitable 
for the measurement of AC currents and voltages.
Terminal protection with click-fitting back cover.
Better resolution.
Knife edge pointer.
Mounting arrangement
Linear scale.
Less VA burden.
Easily replaceble glass and bezel.
Glass filled polycarbonate housing (UL 94-V-0)
For more details please refer datasheet.

Frequency meter 240deg - ZL 96/144 - RISHABH
Product Overview

The pointer type frequency meters,ZL 96/144 
housed in moulded polycarbonate cases 
are used for the measurement of frequencies
in the range of 45 to 450 Hz.
For maximum accuracy,the essential
measuring range is obtained
by supressing the unwanted frequency span.
Terminal protection with click-fitting back cover.
Easily replaceble glass and bezel.
Glass filled polycarbonate housing (UL 94-V-0)
For more details please refer datasheet.

Power Factor Meter 240deg - CL 96/144 - RISHABH
Product Overview

The moving coil indicators CL 96/144 
and a phase angle adjuster are used 
to monitor changing power factor conditions 
on ir-reversible balanced load systems.
These meters offer several advantages 
in Switchboard and Generating Set panels. 
Number of meters can be mounted in
a single Cut out (Mosaic Mounting). 
Terminal protection with click-fitting back cover.
Easily replaceble glass and bezel.
Glass filled polycarbonate housing (UL 94-V-0)
For more details please refer datasheet.

Power meter 240deg - WL 96 /144 - RISHABH
Product Overview

The Watt and Var meters, WL 96/144 
are offered for the following AC systems
- single phase
- 3 phase balanced load 3 or 4 wire
- 3 phase unbalanced load 3 or 4 wire
These instruments are suitable to indicate 
forward (export/out-going) andreverse 
(import/incoming) power flow as well as 
inductive and capacitive reactive power. 
They can be used both on sinusoidal 
and non-sinusoidal current.
For more details please refer datasheet.
 

Analog Panel Meters - Anush Series - RISHABH
Product Overview

The 011 and 012 Anush Series 
are analog panel meters that measure AC/DC
voltage or current and frequency. 
They are available in industry standard 
sizes and have a detachable lower fascia 
that allows for surface or window mounting.
The Anush Series also has a rear zero 
adjuster screw for tamperproof installation.
Measuring and indication of AC amps, volts, 
frequency and DC signals.
Surface of window mounting.
For more details please refer datasheet.
 

Dual Moving Iron AC meters - EQ 2 in 1 - RISHABH
Product Overview

The moving iron panel meters, 2-in-1 
housed in moulded polycarbonate cases are
suitable for the measurement of AC 
currents for frequency range of 15...400Hz
and voltages in the frequency range of 15...100Hz.
Two different meters in one case.
Near linear scale.
Glass filled polycarbonate housing(UL 94 V-0).
Easily replacable glass & bezel.
Knife edge pointe
Terminal screws and clamps
Terminal protection with click-fitting back cover
For more details please refer datasheet.

Dual Moving Coil DC Meters - PQ 96/144 2 in 1 - RISHABH
Product Overview

The moving coil panel meters, 2 in 1 PQ 
housed in moulded polycarbonate cases 
are suitable for the measurement 
of DC currents and voltages
These instruments offer several advantages
in switchboards and Generating Set Panels.
Two different meters in one case.
Linear scale.
Glass ¿lled polycarbonate housing(UL 94 V-0).
Easily replacable glass & bezel.
Knife edge pointe
For more details please refer datasheet.
 

Elapsed Time Meter (Hours Run Meter) - ETM 72/96 - RISHABH
Product Overview

Elapsed Time Meters ETM 72/96 housed 
in moulded polycarbonate cases are suitable 
for the measurement of run time of machines, 
equipments and other devices.
Applications:- Business Machines,Control Panels,
Compressors,Generators,Pumps,Air Conditioning.
Elapsed Time Meters (Hours Run Meters) are used 
to monitor ON/RUN time of plant/equipment which 
allows the user to check functions such as Production
Efficiency, Cost and service period monitoring.
The time is measured in increments of 0.01 to 99999.99 hour.
Non resettable to prevent accidental resetting.
For more details please refer datasheet.
 

Analog Panel Meter - RISH VISTA - RISHABH
Product Overview

The RISH VISTA range of analog panel meters 
offers accurate measurement and indication 
of most electrical and electronic parameters 
in industry as per industrial standard case size
Measuring and indication of AC amps, volts and DC signals.
Panel mounting.
High torque pivot and jewel movement.
True RMS measurement meters.
AC and DC inputs.
Up to 50A DC direct connected.
Up to 50A AC direct connected.
For more details please refer datasheet.

Cam Switch - RISH Cam Spring Return Series - RISHABH
Product Overview

Spring Return Switches provide contacts 
that are held closed only when the switch is 
turned against the mechanism spring. 
The mechanism returning the contacts to their 
original state upon release of the actuator.
This type of switches are known as 
''Momentary switches''.
Compact Design
60 & 90 Degree Angle of Throw
Flag Type Knob Handle
Spring Loaded Mechanism
For more details please refer datasheet.

Cam Switch - RISH Cam TNC Series - RISHABH
Product Overview

TNC switch is a three position switch 
when it is in close position it put 
the circuit breaker in operation by e
nergizing the closing coil and when it 
is in a trip position it will trip the 
circuit by energizing the trip coil in 
the circuit breaker.
The switch return to neutral position after 
any operation (either close or trip). 
Spring Loaded Mechanism
Standard Mounting Plate
For more details please refer datasheet.
 

Cam Switch - DB Switch with LED indication - RISHABH
Product Overview

Rishabh's new 'DB Switch with LED Indication' 
offers a wide application of Phase Changeover 
in Distribution Box panels. 
It switches from one phase to another phase 
in case of the failure of the selected phase.
Three Phase indication
Output indication
Wiring Routing
Compact Size
Reliable Design
Quick & Easy Installation
Protection Class
For more details please refer datasheet.

Cam Switch - Rish Cam Reverse Forward Switch - RISHABH
Product Overview

Rishabh’s new RISH Cam Reverse Forward Switch 
offers a wide application in motor controlling 
with maximizing benefits. These switches have 
wide application in motor control for changing 
the direction of rotation in Forward and Reverse
way with 2 pole and 3 pole options. 
Reverse Forward Switches have 3 different 
operating position–REV,OFF and FOR.
100,000 operations at 300 cycles / hour
IP50 Protection to front facia
Self-lifting terminal clamp assembly
For more details please refer datasheet.
 

Cam Switch - Rish Cam I,C,M &INS - RISHABH
Product Overview

Rishabh's New Rish Cam I,C,M &INS 
rotary cam Switches offer a complete 
range of cam switches for control,
Instrumentation and motor starting 
applications , maximizing the benefits 
and optimizing your use of asset.
Multi-step Switches
Volt-Ammeter Switches
Selector Switches
Mains Switching
Coolant Pumps
For more details please refer datasheet.

Current Transformer - Nano 3 phase CT - RISHABH
Product Overview

Rish Nano 3 Phase CT is a very reliable, efficient 
and robust current transformer for measurement of AC current.
It provides 100 mA AC output. 
It can be used in Circuit breakers,Earth Leakage Protection.
Measurement of AC current for frequency 50/60Hz.
High electric isolation between primary conductor and output.
Easy and safe electrical connection.
Primary rated current 63A,125A and 250A AC.
1500 mm long Secondary Cable for 63 A,125 A & 250 A product.
For more details please refer datasheet.

Current Transformer - Single phase RJ 12 CT - RISHABH
Product Overview

Rish 1 Phase RJ 12 CTs are Square encapsulated 
with UL94V-0 approved polycarbonate. 
It has RJ12 100mA secondary output with RJ12 
interface cable, Available from 50A-800A 
primary current in 4 different sizes
Transmission of measuring signal to the measuring 
unit via RJ12 connection cable
Primary Current 50A to 800A.
RJ12 socket for fast connection eliminate wiring errors.
Various mounting options like bus bar mounting, 
wall mounting, Universal din-rail mounting
Sealing cap for tamper-proof connection
For more details please refer datasheet.

3 Phase Current Transformer - RISH XMER 3PH Series - RISHABH
Product Overview

RISH XMER 3PH Series has Compact size.
Wide range of system current Ratings.
Insulation class :-E(120°C max)
Test voltage:- 3KV 50 Hz for 1 minute.
Operating frequency:- 50Hz/60Hz
Rated Primary current :- 40Ato 800A
Rated secondary current :- 5Astandard
Continuous current :-1.2X Rated current
Rated system voltage :- 0.72/3KV
Ambient temperature range:- -25°C to +40°C
Storage temperature range:- -50 to +80°C
For more details please refer datasheet.

RISH Resin Cast Metering CT - LTRC SERIES - RISHABH
Product Overview

Rish resin cast CTs are square type 
and molded with epoxy resin. 
Metering CTs feature with transparent 
terminal cover &amp; wide range 
of primary current ratings,case widths. 
Wall or foot mounting options available.
Features:
Compact size.
Wide range of system current Ratings.
Transparent terminal cover.
Wall mounting.
Terminal with self lifting screw
For more details please refer datasheet.
 

Current Transformer - RISH RESIN CAST PROTECTION CT - RISHABH
Product Overview

Rish resin cast protection CTs are square 
type and molded with epoxy resin. 
Protection CTs feature with transparent terminal 
cover & wide range of primary current ratings,case widths.  
Wall or foot mounting options available.
Transparent cover with IP 20 protection to terminals
Wide range of system current Ratings
Terminal mark ing engraving
Wall mounting
Terminal self lifting clamp assembly
For more details please refer datasheet.
 

Round CTs - RISH TW Series - RISHABH
Product Overview

Product

Data Sheet
Not Found

Rish TW series round type CTs are housed 
in robust case with classical finish.
The case is made of polycarbonate, 
which is flame retardant and non-drip and
confirms to international regulations UL 94 V-0. 
Polycarbonate is a very tough and light weight
engineering plastic material which has got 
the best mechanical properties very 
close to a metallic housing.
Comprehensive measurement of class accuracy.
Cost effective moulded case current transformer.
For more details please refer datasheet.
 

Rish Summation CT - RISH XMER Sigma - RISHABH
Product Overview

RISH XMER Sigma Summation current transformers 
are designed to summarize several synchronous 
Alternating Currents of equal phase relation 
with any angle of phase difference, 
They are used to add secondary currents of 
several mainc.t.’s in order to 
measure with one CT only.
Nickel Plated Secondary Terminals with +/- Screws
Terminal Protection IP10
Rated Short Time Thermal Current-60 X In
Dynamic Short circuit Current 2.5 X Ith
Highest Voltage of Equipment 720V
For more details please refer datasheet.

Core Balance Current Transformer - Rish CBCT - RISHABH
Product Overview

Rish CBCT is a Core Balance Current Transformer 
used to detect & measure leakage current 
passing through the electrical system.
Further the secondary output of the CBCT 
is connected to protection device such as 
Earth Leakage Relay to protect the 
installation & operating personnel 
from possible hazards.
Turns Ratio : 600:1
Leakage current measurement : 30mA to 30A
Cable tie Clips: Cable tie clips are located on 
the CT to ensure that busbar is centrally 
aligned so as to get absolute output.
For more details please refer datasheet.
 

Square Type Current Transformer - RISH X'mer Series - RISHABH
Product Overview

There are two main types of Rish X’mer CTs. 
The first one is Rish X’mer wound primary series 
CTs which consists of both primary and secondary windings. 
This type has two sizes 62/W (40) and 74/W (40).
The second type is Rish X’mer series window type CTs 
which consists of secondary winding and primary 
has to be wound through the hole provided. 
Comprehensive measurement of class accuracy.
Cost effective moulded case current transformer.
Various mounting options like wall mounting, 
cable mounting, bus bar mounting, DIN rail mounting.
Wire sealable terminal covers.
For more details please refer datasheet.

Split Core CT's - RISH Xmer - RISHABH
Product Overview

Rish Split core type CTs are housed in 
robust case with classical finish. 
The case is made of polycarbonate, 
which is flame retardant and non-drip
onfirms to international regulations UL 94 V-0. 
Polycarbonate is a very tough and light weight 
engineering plastic material which has got the 
mechanical properties close to a metallic housing. 
Comprehensive measurement of class accuracy.
Wide range of system current ratings and bus bar sizes.
Cts manufactured as per IEC 60044-1 & IS 2705-1
Operation free installation is possible.
For more details please refer datasheet.

Round Current Transformer - RISH TW-E SERIES - RISHABH
Product Overview

Rish TW-E series round type CTs are housed 
in robust case with classical finish.
The case is made of polycarbonate, 
which is flame retardant and non-drip and
confirms to international regulations UL 94 V-0. 
Polycarbonate is a very tough and light weight 
engineering plastic material which has got the best 
mechanical properties very close to a metallic housing. 
Test voltage 3KV 50Hz for 1minute.
System voltage 720V max.
Ratio ratings from 50/5A to 5000/5A.
For more details please refer datasheet.
 

Split Core CT - RISH Compact - RISHABH
Product Overview

Rish Compact Split core CTs are compact 
in size as compared to earlier Split core
CTs and encapsulated with UL94V-0 approved 
polycarbonate having an openable jaw which 
has special kind of locking profile 
to avoid accidental opening.
Two options for Bus Bar Mounting
Cable Tie provision for faster installation
Safety Plug in shorting link
Available with M4 Size Terminals
Wide range of system current ratings
Assured Core contact with Latching Type Snap fitment
For more details please refer datasheet.
 

Shunts - Rish Shunts - RISHABH
Product Overview

Product

Data Sheet
  Shunts pdf

The RISH Shunts are available from 1A upto 3000A 
with an accuracy of 0.5% &amp; 1%.
Standard voltage drop is 50mV,60mV,75mV &amp 150mV. 
Intermediate current ratings,other voltage outputs, 
better accuracy and purpose built shunts can be supplied.
Rating 1A to 15000A
Riveted and brazed construction
In-line bus bar mounting
Very low temperature coefficient
high overload withstand
Shock and vibration proof
DIN shunts of 1...25 A with base.
IS shunts of 1...30 A with base.
For more details please refer datasheet.
 

Power Supply Single Phase - Rish Flex 48024A - RISHABH
Product Overview

The Rish Flex 48024A is a Power Supply of Single Phase.
This features allows the use of a smaller size unit to 
power demanding loads such as motors, solenoid valves, 
lamps and other loads with transient overload behavior
which would otherwise required an oversize power supply.
input: single-phase: 115 – 230 Vac
Frequency: 47 – 63 Hz 6%
Output: 24 Vdc 60°C
Efficiency up to 92%
Strong overload without switch-off, up to 50%
Flexible Power continuity : from 384 to 480W
For more details please refer datasheet.

Power Supply Single Phase - Rish Flex 24024A - RISHABH
Product Overview

The Rish Flex 24024A is a Power Supply of Single Phase.
This features allows the use of a smaller size unit to 
power demanding loads such as motors, solenoid valves, 
lamps and other loads with transient overload behavior
which would otherwise required an oversize power supply.
Short-circuit protection
Input: 115 – 230 Vac
Output: 24 Vdc 60°C
Efficiency up to 91%
Strong overload without switch-off, up to 50%
Flexible Power continuity : from 192 to 240 W
For more details please refer datasheet.
 

Power Supply 1-Phase - Rish Flex 15048A - RISHABH
Product Overview

The Rish Flex 15048A is a Power Supply of Single Phase.
This features allows the use of a smaller size unit to 
power demanding loads such as motors, solenoid valves, 
lamps and other loads with transient overload behavior
which would otherwise required an oversize power supply.
nput: single-phase: 115 – 230 Vac
Output: 48 Vdc 60°C
Efficiency up to 91%
DIN Rail Mountable
Flexible Power continuity :from 120 to 150 W
Strong overload without switch-off, up to 50%
For more details please refer datasheet.
 

Single Phase Power Supply - Rish Flex 15024A - RISHABH
Product Overview

The Rish Flex 15024A is a Power Supply of Single Phase.
This features allows the use of a smaller size unit to 
power demanding loads such as motors, solenoid valves, 
lamps and other loads with transient overload behavior
which would otherwise required an oversize power supply.
Input: single-phase: 115 – 230 Vac
Output: 24 Vdc 60°C
DIN Rail Mountable
Efficiency up to 91%
Flexible Power continuity :from 120 to 150 W
Strong overload without switch-off, up to 50%
For more details please refer datasheet.

Single Phase Power Supply - Rish Flex 15012A - RISHABH
Product Overview

The Rish Flex 15012A is a Power Supply of Single Phase.
This features allows the use of a smaller size unit to 
power demanding loads such as motors, solenoid valves, 
lamps and other loads with transient overload behavior
which would otherwise required an oversize power supply.
Input: single-phase: 115 – 230 Vac
Output: 12 Vdc 60°C
Efficiency up to 91%
DIN Rail Mountable
Flexible Power continuity :from 120 to 150 W
Strong overload without switch-off, up to 50%
For more details please refer datasheet.

Single Phase Power Supply - Rish Flex 9012A - RISHABH
Product Overview

The Rish Flex 9012A is a Power Supply of Single Phase.
This features allows the use of a smaller size unit to 
power demanding loads such as motors, solenoid valves, 
lamps and other loads with transient overload behavior
which would otherwise required an oversize power supply.
Input: single-phase: 115 – 230 Vac
Output: 12 Vdc 60°C
Efficiency up to 91%
DIN Rail Mountable
Flexible Power continuity :from 95 to 120 W
Strong overload without switch-off, up to 50%
For more details please refer datasheet.

Single Phase Power Supply - Rish Flex-e 17024A - RISHABH
Product Overview

The Rish Flex-e 17024A is a 1-phase power supply
from Rishabh Instruments. 
It has following features:
Input: 115–230 Vac single-phase
Output: 24 Vdc 60°C
Power continuity: 120–180 W
Operating temperature: -25°C to 70°C with derating
Features: Can power demanding loads like motors, 
solenoid valves, lamps, and others
For more details please refer datasheet.

2 Phase Power Supply - Rish Flex-e 17024B - RISHABH
Product Overview

The Rish Flex-e 17024B is a 1-phase power supply
from Rishabh Instruments. 
It has following features:
Input: 200 – 500 Vac
Output: 24 Vdc 60°C
Efficiency up to 87%
Strong overload withstand capability
Flexible Power continuity :from 120 to 180 W
DIN Rail Mountable
Extremely small size
3 Year warranty
For more details please refer datasheet.

2-Phase Power Supply - Rish Flex-e 9024B - RISHABH
Product Overview

The Rish Flex-e 9024B 2-Phase power supply
from Rishabh Instruments. 
It has following features:
Input: 200 – 500 Vac
Output: 24 Vdc 60°C
Efficiency up to 87%
Strong overload withstand capability
Flexible Power continuity:from 95 to 120W
DIN Rail Mountable
Extremely small size
3 Year warranty
For more details please refer datasheet.

Single Phase Power Supply - Rish Flex-e 60xxA - RISHABH
Product Overview

The Rish Flex - e 60xxA 1-Phase power supply
from Rishabh Instruments. 
It has following features:
Input: single-phase:85-264 VAC,124-370 VDC
Output: 24 Vdc +/- 3% (2.5A)
Nominal output voltage See Table 1
Adjustment range See Table 1
Rated current See Table 1
Efficiency greater than 87%
DIN Rail Mountable
3 Year warranty
For more details please refer datasheet.

Single Phase Power Supply - Rish Flex-e 45xxA - RISHABH
Product Overview

The Rish Flex-e 45xxA 1-Phase power supply
from Rishabh Instruments. 
It has following features:
Input: single-phase:85-264 VAC,124-370 VDC
Output: 24 Vdc +/- 3% (2.5A)
Nominal output voltage See Table 1
Adjustment range See Table 1
Rated current See Table 1
Efficiency greater than 87%
DIN Rail Mountable
Extremely small size
3 Year warranty
For more details please refer datasheet.

3-Phase Power Supply - Rish PST 2430B - RISHABH
Product Overview

The Rish PST 2430B 3-Phase power supply
from Rishabh Instruments. 
It has following features:
Input: three-phase 400 - 480 Vac
Output: One output 30 A - 24 Vdc
Strong overload without switch-off
Short-circuit protection
Over-voltage protection
Degree of protection: IP20
DIN Rail Mountable
Extremely small siz
For more details please refer datasheet.

3-Phase Power Supply - Rish Flex 50024B - RISHABH
Product Overview

The Rish Flex 50024B 3-Phase power supply
from Rishabh Instruments. 
It has following features:
Input: 3-phase: 400 – 500 Vac
Output: 24 Vdc 60°C
Efficiency up to 91%
Strong overload without switch-off, 
upto50%Flexible Power continuity : 
from480to600W“Power Good” Relay
DIN Rail Mountable
Extremely small size
For more details please refer datasheet.

3-Phase Power Supply - Rish PST 2440B - RISHABH
Product Overview

The Rish PST 2440B 3-Phase power supply
 is extremely small size from Rishabh Instruments. 
It has following features:
Input: three-phase 400 - 480 Vac
Output: One output 40 A - 24 Vdc
Strong overload without switch-off
Short-circuit protection
Over-voltage protection
Degree of protection : IP20
DIN Rail Mountable
Extremely small size
For more details please refer datasheet.

1-Phase Power Supply - Rish Flex 6005A - RISHABH
Product Overview

The Rish Flex 6005A is a 1-Phase power supply
from Rishabh Instruments. 
It has following features:
Input: single-phase: 115 – 230 Vac
Output: 5 Vdc 60°C
Efficiency up to 82%
Strong overload without switch-off
Flexible Power continuity : 
up to 35WDIN Rail Mountable
Extremely small size
3 Year warranty
For more details please refer datasheet.
 

Motorised Impact Testing Machine - FIT-300/400-ASTM / FIT-300/400-ASTM-D - FINE
Product Overview

A motorized impact testing machine is used 
to test the resistance of a material or 
component to a rapid load under varying 
temperature conditions. 
It has a motorized lift,an electromagnetic brake, 
and an auto release for the pendulum hammer. 
The machine also has a motorized system for 
reloading the pendulum via a pushbutton.
Hence there is no strain & fatigue to operator 
while lifting the pendulum hammer frequently.
For more details please refer datasheet.

Digital ASTM Charpy Impact Testing Machine - FIT-300/400-ASTM, FIT-300/400-ASTM-D - FINE
Product Overview

The ASTM Charpy Impact Testing Machine that can
perform Charpy tests on various materials. 
It has a capacity of 300 or 400 joules
and conforms to the current ASTM-E-23 standard.
Capacity: Charpy: 300 / 400 Joule.
Suitable only for Charpy tests on various material.
Machine conforms to ASTM-E-23- current standard.
Pendulum release lever with safety lock for operator safety.
New modified Brake drum unit is provided to stop the 
pendulum swing instantly after test.
Large safety guards are provided either side of machine.
For more details please refer datasheet.

Digital Impact Testing Machine - FIT-300EN (ISO 148) - FINE
Product Overview

The Digital Impact Testing Machine FIT-300EN 
is a low-cost impact testing machine. 
It has a capacity of 300 joules for Charpy 
and 170 joules for Izod. It also has a pendulum 
preparing angle of 150 degrees and a speed of 5.2m/s
This is low cost Impact testing machine & it is 
specially designed for engineering colleges.
This is simple & maintenance free machine.
New modified Brake drum unit is provided to 
stop the pendulum swing instantly after test.
Safety guard is provided for operator safety.
For more details please refer datasheet.

Combined Impact Testing Machine - FIT -300-EN-ASTM - FINE
Product Overview

The Combined Impact Testing Machine 
is a low-cost impact testing machine. 
For Indirect verification NIST/ ERM 
Charpy samples can be arranged.
According to test, user can select Charpy 
strikers(Radius R 2 mm or R8 mm) or Izod 
strikers (Radius R 0.75 mm).
To prevent accident from pendulum swing, 
safety guards are provided to either side of machine.
New modified Brake drum unit is provided to stop 
the pendulum swing instantly after test.
Optional Digital display unit can also be supplied.
Total Maintenance free machine
For more details please refer datasheet.

Front Open Hydraulic Grips - Computerized Universal Testing Machine with Servo System - FINE
Product Overview

This is hydraulically controlled 
servo Universal Testing Machine. 
The main advantage of this sero system is
a test can be conducted by giving a 
specific load rate or elongation rate. 
The oil flow is controlled by the close 
loop feedback from the load elongation 
system. Test with specific load 
steps can also be conducted.
Menu driven form system with colour 
graphs to compare sample test results
For more details please refer datasheet.

Front Open With Hydraulic Grips - Computerized Universal Testing Machine - RISHABH
Product Overview

This is Front Open With Hydraulic Grips 
Computerized Universal Testing Machine. 
The main advantage of this sero system is
The main advantage of this sero system is
a test can be conducted by giving a 
specific load rate or elongation rate. 
The oil flow is controlled by the close 
loop feedback from the load elongation 
system. Test with specific load 
steps can also be conducted.
Menu driven form system with colour 
graphs to compare sample test results
For more details please refer datasheet.

Computerized Universal Testing Machine - Servo Controlled - FINE
Product Overview

This is hydraulically controlled servo Universal Testing Machine. 
All other specifications are as per TFUC model.
The main advantage of this servo system is a test 
can be conducted by giving a specific load rate or 
elongation rate. The oil flow is controlled by the 
close loop feedback from the load elongation system. 
Test with specific load steps can also be conducted
The oil flow is controlled by the close 
loop feedback from the load elongation system. 
Test with specific load steps can also be conducted.
User programmable master test templates
For more details please refer datasheet.

Tensile Testing Machine - Electro-Mechanical Computerized - FINE
Product Overview

Electro-Mechanical Computerized Tensile Testing Machine
These models are suitable for testing metals and iron, 
Plastics,Rubber,Ceramics,Fabrics,Composites,Cables and wires. 
Load is measured through a strain gauge based 
Load Cell and elongation is through rotary encoder. 
Depending upon the customers requirement a 
suitable type of grips are available. 
Extra Load cell can be offered 
suitable for low load samples. 
For more details please refer datasheet.

Fully Automatic Computerized Brinell Hardness Testing Machine - OPFB-A, A-3000 PC - FINE
Product Overview

Machine designed with fully automatic loading, 
measuring and unloading cycle. 
A compact hydraulic power pack and control circuit
with built in optical device with 14X magnification 
provided in front to project diameter of ball 
impression on glass screen with micrometer 
measuring system with 0.01 mm least count.
Highly efficient yet low cost.
For more details please refer datasheet.

Computerized Brinell Hardness Testing Machine - B-3000-PC / B-3000-TPC - FINE
Product Overview

B-3000-PC / B-3000-TPCComputerized Brinell Hardness tester 
has a C type load frame. The job is positioned on the test 
table and lifted by the hand wheel to touch the support plate. 
Required load is applied on the job and removed by operating Load 
/ unload knob provided on machine at the bottom side of load frame.
The timely indexing of indentors is automatic.
Highly efficient yet low cost.
For more details please refer datasheet.

Digital Optical Brinell Hardness Testing Machine - OPFB 3000 D - FINE
Product Overview

Digital Optical Brinell Hardness Testing Machine
For average option, up to 9 previous 
readings displayed while measurement
Batch Facility – User can decide no. of samples in batch
Batch wise reports and statistical reports 
on display as well as on printer
User can scroll report on display with UP/DOWN key
All Results reports are displayed and Printed on Printer.
All Reports are transferred on Serial Port.
For more details please refer datasheet.

Optical Brinell Hardness Testing Machine - OPFB-3000 - FINE
Product Overview

FMI has developed Brinell Hardness Testing 
Machine with optical device. 
Basic machine design and operation is similar 
to TKB-3000, with built in optical device with 
14X magnification provided in front to project 
diameter of ball impression on glass screen with a 
micrometer measuring system with 0.01 mm least count. 
In this machine the indentor swivels and projects 
diameter of ball impression immediately after ...
For more details please refer datasheet.

Brinell Hardness Testing Machine - TKB-3000 - FINE
Product Overview

The TKB-3000 (M) Brinell Hardness Tester is a precision 
engineered Hardness Testing Machine conforming to 
IS 2281-2005 & BS 240 and ASTM-E-10. 
This simple mechanical machine features 
loading/unloading through a manually operated lever. 
It is most suitable for me asuring the hardness 
of steel and other metals of various shapes
A separate hydraulic power pack placed at the bottom, 
makes the design more stable and easy serviceable.. 
For more details please refer datasheet.

Deep Throat Brinell Hardness Testing machine - DT-3000-series - FINE
Product Overview

Deep Throat Brinell Hardness Testing Machines 
are designed with hydraulic Power pack and control 
circuit for effortless testing of heavy duty jobs. 
The machines are suitable for production testing. 
These machines are designed to measure Brinell 
hardness of castings, forgings, other metals & 
alloys of all kinds, hard or soft, whether flat, 
round or irregular shape.
For more details please refer datasheet.

Digital Motorized Rockwell Hardness Testing Machine - TRSN-D, TRSN-TD, TRSN-BD, TRSN-CD - FINE
Product Overview

Rockwell Cum Superficial Cum Brinell Hardness Testing Machine 
is manufactured under strict quality control 
at all manufacturing stages. 
This model is suitable for testing hardness 
of metals and alloys of all kinds, hard or soft, 
whether flat or round etc. or of irregular shape. 
This model is having superior design to that of 
existing conventional Rockwell Hardness Testers 
For more details please refer datasheet.

Export Rockwell Hardness Tester series - TRSN, TRSN-B, TRSN-C - FINE
Product Overview

Rockwell Hardness Testing Machine is manufactured
under strict quality control at all manufacturing stages. 
This model is suitable for testing hardness of 
metals and alloys of all kinds, hard or soft, 
whether flat or round etc. or of irregular shape. 
This model is having superior design to that of
existing conventional Rockwell Hardness Testers 
&easy to operate still quite sensitive &accurate.
For more details please refer datasheet.

Analogue Rockwell Hardness Testers - IRS, TRS-150_ TRB, TRB-250 ,TSM - FINE
Product Overview

Fine make hardness testers model 
IRS, TRS-150_ TRB, TRB-250 and TSM 
are manually operated These models 
are designed and developed after years 
of experience in this field. 
All the models are manufactured under 
strict quality at all manufacturing stages.
For more details please refer datasheet.

Computerised Vickers Hardness Testing Machine - TV-50-PC, TV-50-TPC, TV-250-PC, TV-250-TPC - FINE
Product Overview

Fine make Computerised Vickers Hardness Testing Machine
is a sophisticated piece of equipment
used for precise hardness measurements. 
It combines cutting-edge technology with robust 
mechanics to evaluate the hardness of materials,
including metals, ceramics, and composites.
Fully Computerized System:
The machine employs an inbuilt industrial 
PC with a touch screen interface.
For more details please refer datasheet.

Vickers, Vickers cum Brinell Hardness Testing Machine - TV-50, TV-50 (SPL), TV-250, TV-250 (SPL.) - FINE
Product Overview

Fine make Vickers Hardness Testing Machine
is a sophisticated piece of equipment
used for precise hardness measurements. 
It combines cutting-edge technology with robust mechanics 
Four model are available :
TV-50 With Loads 5 to 50 Kgf
TV-250 With loads 5 to 250 Kgf
TV-50 (SPL.) With Loads 1 to 50 Kgf
TV250 (SPL.) With loads 1 to 250 Kgf
For more details please refer datasheet.

Portable Leeb Hardness Tester Machine - THL-280 PLUS - FINE
Product Overview

Fine Make Portable Leeb Hardness Tester Machine 
is a sophisticated piece of equipment
used for precise hardness measurements. 
LCD display of 128×64 matrix with back-light, 
showing all functions and parameters.
Converts to all common hardness scales(HV,HB,HRC,HRB,HRA,HS).
English displaying and easy and 
convenient menu operation.
For more details please refer datasheet.

Portable Hardness Tester - TRP-1 - FINE
Product Overview

Product

Data Sheet
Not Found

Portable Rockwell Hardness Tester, Model: TRP-1 
is able to test parts where bench type model not useful. 
This machine is quite handy for product testing 
of crank shafts, cylindrical blocks, liner and assemblies. 
This can be used for testing the hardness of both inside 
and outside of surface testing of pipes, bushing, 
ball bearings rings or other complicated parts. 
This model can be used for testing the hardness 
For more details please refer datasheet.

Portable Handheld Barcol Hardness Tester - ALP-1 - FINE
Product Overview

The ALP-1 is a small portable Hardness Tester 
having weight around 1 kg., suitable for testing 
the hardness of aluminum, aluminum alloys, copper, 
brass & other materials having hardness from 
25 to 150 BHN (10 mm ball / 500 kg. Load)
No experience required, can be used in any position. 
The hardness readings is indicated on the dial 
gauge which is divided into hundred graduations.
For more details please refer datasheet.

Computerized Fatigue Testing Machine - FTG-8 - FINE
Product Overview

This machine is used to test the Fatigue strength 
of materials and to draw S-N Diagram by research 
institutes, Laboratories, material manufacturers 
and various industries. This is a rotating beam 
type machine in which load is applied in reversed 
bending fashion. The standard 8 mm dia specimen 
is held in special holders at its ends and loaded 
such that it experiences a uniform bending moment. 
The specimen is rotated at 4200 rpm by a motor. 
For more details please refer datasheet.
 

Digital Motorised Coil Spring Testing Machine - FSTM-2500 N, FSTM-5000 N - FINE
Product Overview

The Digital Motorized Coil Spring Testing Machine 
is a sophisticated piece of equipment 
used for precise spring testing. 
It combines cutting-edge technology 
with robust mechanics to evaluate the 
performance of coil springs,including 
compression,tension and torsion springs.
Measuring Capacity(N): 2500,5000
Measuring Range(N):    0-2500, 0-5000
Least Count(N): 0.1,0.2
For more details please refer datasheet.
 

ELECTRONIC SPRING TESTING MAHCINE - FSTM200 - FINE
Product Overview

FMI makes range of spring tasting machines 
are used for quick and accurate testing of 
tension and compression spring. 
The machine comprises of two
hardcrome plated column with fine cut 
single screw with hand wheel for
manual loading and unloading arrangement .
Microprocessor based electronic with tare facility
Force measurement Accuracy +/-1 % of indicated load
For more details please refer datasheet.

Digital Torsion Testing Machine - FTT-100, 200, 500, 1000, 2000-NM -D - FINE
Product Overview

FMI makes range of Digital Torsion Testing Machine
are used for quick and accurate testing of 
tension and compression spring. 
Suitable for Torsion and Twist tests on 
various meta rods and flats.
Torque measurement by Torque cell & angle of 
twist on LCS display provided on Data Acquisition System
Torque resolution 0.01% of machine capacity for entire range
Angle of twist resolution is 0.1 degree
Accuracy of Torque measurement ± 1% 
For more details please refer datasheet.

Clamp Meter and Thermal Imaging Camera - FLIR CM276 - FLIR
Product Overview

The FLIR CM276 clamp Meter Combines thermal imaging 
with electrical measurement for inspecting 
and troubleshooting electrical systems,
solar panels, pumps, and motors. 
Through IGM™ (Infrared Guided Measurement), 
the CM276 provides a reliable way to identify h
ot spots and overloaded circuits from a safe distance. 
IR Resolution:160 × 120 (19,200 pixels)
Display Size:2.4 in, TFT screen
Jaw Opening    :35 mm (1.37 in)
For more details please refer datasheet.

Industrial Thermal Imaging Multimeter - FLIR DM286 - FLIR
Product Overview

The FLIR DM286 industrial imaging multimeter 
is the ultimate tool for electrical inspectors 
seeking a safe,accurate and efficient way to identify, 
document, and share findings. With IGM™ 
(Infrared Guided Measurement) and 
MSX® (Multi-Spectral Dynamic Imaging),you can safely 
identify where hazards might be before contact is ever made. 
The powerful multimeter can capture and store up to 
30,000 images and 100 log files, with the ability 
to record thermal and visual video clips. 
For more details please refer datasheet.

Insulation Tester and Digital Multimeter - FLIR IM75-2 - FLIR
Product Overview

The FLIR IM75-2 is both an advanced 
multifunction digital multimeter and 
a premier handheld insulation tester 
with functions for installation, 
troubleshooting and maintenance for professionals. 
The FLIR IM75-2 includes several specialty 
insulation modes such as polarization index, 
dielectric absorption, and earth bond resistance. 
Insulation tests can be performed instantly,continuously, 
and over a timed duration to allow for in-depth assessment. 
For more details please refer datasheet.

Industrial Digital Multimeter - FLIR DM93-2 - FLIR
Product Overview

The FLIR DM93-2 is a digital multimeter 
with advanced variable-frequency drive (VFD) 
filtering to help you accurately analyze 
non-traditional sine waves and noisy signals 
found in VFD-controlled equipment. 
AC Current    10.000 A ± 1.0%
AC Voltage    1000.0 V ± 0.5%
Capacitance    40.00 mF ± 0.9%
Continuity Threshold:30 Ω ± 0.2%
DC Current    10.000 A ± 0.2%
DC Voltage    1000.0 V ± 0.05%
For more details please refer datasheet.

20:1 Spot IR Thermometer - FLIR TG54-2 - FLIR
Product Overview

The FLIR TG54-2 provides non-contact temperature readings 
so you can swiftly and effortlessly take 
measurements without compromising on safety. 
Providing a distance-to-spot ratio of 20:1, the TG54-2 
can measure smaller targets from a safer distance. 
Achieve pinpoint precision with infrared technology, 
Class II laser sighting, and a maximum IR 
temperature of 850°C (1562°F). 
For reliable performance in demanding applications, 
the thermometer is built to withstand a drop 
of 3 m (9.8 ft) and is IP65 rated.
DC Current    10.000 A ± 0.2%
For more details please refer datasheet.

30:1 Spot IR Thermometer - FLIR TG56-2 - FLIR
Product Overview

The FLIR TG56-2 provides safer temperature readings 
where high temperature readings are required. 
Providing a distance-to-spot ratio of 30:1, 
the TG56-2 can measure smaller 
targets from a safer distance. 
Pinpoint precision is driven by infrared technology, 
Class II laser sighting, and a maximum 
IR temperature of 1300°C (2372°F). 
The color display screen is designed for you to 
easily view current and selected reference 
temperature readings simultaneously. 
Basic Accuracy:0°C to 100°C(32°F to 212°F):±1.0°C (±1.8°F)
For more details please refer datasheet.

Flexible Clamp Meter - CM57-2 - FLIR
Product Overview

The FLIR CM57-2 is a flexible clamp meter 
designed for difficult current measurements. 
With its 18-inch (45.72 cm) flexible coil clamp, 
the CM57-2 allows you to take measurements in tight 
spots, making it ideal for multiple-conductor 
measurements and double-wrap requirements. 
The meter also features dual LED work lights 
for better visibility, and AC current 
ranges from 30.00 A to 3000 A.
Basic AC current accuracy (of reading):±3.0% + 5 digits
Display Rate:2 times per second
Flex Coil Length:45 cm (18 in)
Flex Coil Tip Diameter:13 mm (0.5 in)
Inrush Current  Minimum :0.5 A, 100 mS
For more details please refer datasheet.

True RMS Power Clamp Meter (Wireless) - FLIR CM85-2 - FLIR
Product Overview

The FLIR CM85-2 is an industrial power clamp meter 
with advanced power analysis and variable frequency
drive (VFD) filtering functions required by 
electrical troubleshooters for full-scale equipment.
Accurately analyze voltage in complex machinery by 
including harmonics, inrush, current, and 
phase rotation testing with a wide 
AC/DC voltage range and base accuracy of ±1%. 
Capacitanc:
3.999 μF, ±(1.9% + 8 digits)
39.99 μF, ±(1.9% + 8 digits)
For more details please refer datasheet.

Clamp Meter with Datalogging (Wireless) - FLIR CM275 - FLIR
Product Overview

The FLIR CM275 clamp meter combines thermal imaging 
with electrical measurement into powerful inspection,
troubleshooting, and diagnostic tools. 
Through Infrared Guided Measurement (IGM), 
the CM275 provides a reliable way to identify 
hot spots and overloaded circuits from a safe distance. 
Confirm your findings with the clamp meter’s wide range 
of functions plus temperature readings.
IR Resolution:160 × 120 (19,200 pixels)
Display Size:2.4 in TFT screen
AC/DC Voltage:Range 1000V / Basic Accuracy ±1.0%
AC Current:Range 600.0A / Basic Accuracy ±2.0%
For more details please refer datasheet.

True RMS Clamp Meter - FLIR CM44 - FLIR
Product Overview

The FLIR CM4X Clamp Meter Family includes 
three professional and affordable True RMS 
meters designed for commercial and residential 
electricians. The CM42 and CM44 feature AC clamp 
measurement, and the CM46 offers both AC/DC measurement 
to meet your unique needs. Each meter is equipped with a 
bright backlit display for use inside electrical panels. 
Accu-Tip™ technology delivers amperage 
measurements on smaller-gauged wires more accurately — 
to a tenth of a digit.  
Capacitance    2500 µF (Basic Accuracy ±2.0%)
For more details please refer datasheet.

TRMS Multimeter with VFD Mode - FLIR DM66 - FLIR
Product Overview

The DM66 digital multimeter is ideal for 
automation field service or electronics technicians, 
providing a comprehensive feature set including 
low impedance (LoZ) mode,frequency,diode,capacitance, 
and a Type K thermocouple input for temperature measurement. 
The multimeter combines rich features, precise measurements, 
and quality construction into a tool of exceptional value. 
Easy to use and built to last, the DM66 offers 
long-term stability for everyday use.
AC/DC Voltage:Range: 
600.0 V Basic Accuracy: ±1.0% / ±0.4%
AC/DC microAmps    Range: 
6000 µA Basic Accuracy: ±1.5% / ±1.0%
For more details please refer datasheet.

Voltage, Continuity, and Current Tester - FLIR VT8-Series - FLIR
Product Overview

The FLIR VT8-Series are high-quality voltage,
continuity, and current testers. 
They feature an optimized, open-jaw design that 
can fit into tight spaces and reliably measure 
large-diameter cables. 
The VT8-600 carries a CAT III-600 V/CAT IV-300V 
safety rating and a 100 A/600 V measuring range, 
while the VT8-1000 carries a CAT III-1000 V/
CAT IV-600V safety rating and a 200A/1000V measuring range.
AC/DC Current Range: 200 A
AC/DC Volts Accuracy: ±1.5%, ±1.0% (56 to 66 Hz)
AC/DC Volts Range: 1000 V
For more details please refer datasheet.

IGM™ Moisture Meter with Replaceable Hygrometer - FLIR MR176 - FLIR
Product Overview

Featuring Infrared Guided Measurement (IGM) technology
powered by a built-in FLIR Lepton® 80 x 60 thermal 
imaging sensor, the MR176 visually guides you to 
the precise spot that moisture may be hiding. 
Use the integrated laser and crosshair to help 
pinpoint the surface location of the issue found with IGM.
An integrated pinless sensor and an external pin probe 
provide the flexibility to take either non-intrusive 
or intrusive measurements. 
Thermal image palettes:Iron, Rainbow, Ice, Greyscale
Pin Moisture: Range 7% to 30% / Basic Accuracy ±1.5% 
MC/Range 30% to 100% / Basic Accuracy Reference only
Pin Moisture Groups: 9 Material Groups
For more details please refer datasheet.

IGM™ Moisture Meter - FLIR MR160 - FLIR
Product Overview

Featuring Infrared Guided Measurement (IGM), 
the MR160 helps you quickly target moisture issues, 
visually guiding you to the spot where you can 
confidently take measurements and analyze readings. 
An integrated pinless sensor and an external pin 
probe provide the flexibility to take either 
intrusive or non-intrusive measurements. 
The MR160 can serve as your go-to troubleshooting 
tool right out of the box — or as the perfect 
complement to any high resolution 
thermal camera you already own.
For more details please refer datasheet.
 

5-in-1 Moisture Meter with METERLiNK® - FLIR MR77 - FLIR
Product Overview

The FLIR MR77 has everything you need 
for moisture remediation or HVAC: 
a pinless moisture sensor and pin probe, 
a temperature and relative humidity sensor, 
and an IR thermometer. 
The meter includes Bluetooth® for remote 
viewing and sharing, as well as METERLiNK® 
technology to wirelessly embed readings 
into radiometric infrared images on 
compatible FLIR thermal cameras. 
Made with field-replaceable sensors, 
the MR77 is engineered to help you 
get more done in less time.
For more details please refer datasheet.
 

Moisture Meter Pro - FLIR MR60 - FLIR
Product Overview

The FLIR MR60 Moisture Meter Pro is an easy-to-use 
pin and pinless moisture meter with advanced functionality.
An integrated pinless sensor and an external pin probe 
provide the flexibility to take destructive or 
non-destructive measurements. 
Select one of the eleven material groups for pin moisture, 
or set a reference point for pinless moisture scanning. 
Then conveniently save screenshots of your measurements 
as a CSV file with the date, time, and settings.
Pinless Moisture Depth:1.9cm (0.75") maximum
Pinless Moisture Range:0–100 relative measurement
Response Time Pin Mode:750 ms
Response Time Pinless:100 ms
For more details please refer datasheet.
 

Ball Probe Moisture Meter with Bluetooth® - FLIR MR59 - FLIR
Product Overview

The FLIR MR59 is a pinless meter 
with wireless connectivity, which 
offers the convenience to view live 
readings from a mobile device via 
the FLIR METERLINK® App. 
Thanks to the ball-shaped sensor, 
users can cover a large area in a short
time without making a mark; measure into 
corners and around baseboards easily; 
and detect problems below the surface.
Measurement Principle:Capacitive (non-invasive)
For more details please refer datasheet.

Pin Moisture Meter with Bluetooth® - FLIR MR55 - FLIR
Product Overview

The FLIR MR55 is a pin-based meter 
with wireless connectivity, which offers 
the convenience to view readings from a 
mobile device via the METERLiNK® app. 
Thanks to a built-in library of 11 material groups, 
users can tune the meter to the appropriate test
material to improve measurement accuracy. 
This library is easy to access on the FLIR.com 
website by scanning a QR code on the back
of the meter with a mobile device.
Measurement Principle:Electrical resistance using pins
For more details please refer datasheet.

Moisture Pen + Flashlight - FLIR MR40 - FLIR
Product Overview

The FLIR MR40 is a pocket-portable, rugged 2-pin, 
single-scale moisture meter with an integrated 
flashlight for wood and common building materials—ideal
for builders, building inspectors, remodelers, 
moisture remediation technicians, pest 
control professionals, and residential 
roofing and flooring contractors. 
Providing reliable and accurate measurements
offered at a highly affordable price point, 
MR40 is a quick and easy-to-use tool to 
find and quantify moisture content.
For more details please refer datasheet.

HVAC/R Environmental Meter - FLIR EM54 - FLIR
Product Overview

Product

Data Sheet
Not Found

The FLIR EM54 is ideal for inspecting and troubleshooting 
HVAC/R ducting systems within residential,
commercial, and industrial facilities. 
This meter can help you verify that duct inlets and 
outlets have the specified volumetric flow–a 
prerequisite to an efficient functional system. 
Featuring humidity, wet bulb, and dew point functions, 
the EM54 can measure deviations from 
proper relative humidity levels.
Plus, the included Type-K contact temperature 
probe is useful to check electric motors 
and thermal equipment components for 
proper operating temperatures.
For more details please refer datasheet.

Anemometer with Connectivity to ExView® App - Extech AN250W - EXTECH
Product Overview

The AN250W is a compact airflow meter with Bluetooth®
connectivity, which allows building, HVAC, and 
maintenance professionals to view and share 
air velocity and temperature data directly from a 
mobile device using the free ExView app. 
With the capability to capture data, display trends,
set visual and audio alarms, and create and send reports,
users can gain deeper insights on environmental 
conditions and building health. 
The AN250W is part of the Extech 250W Connected 
Series of products that can improve your ability 
to evaluate problems and report on them from the field.
This allows you to improve the speed and quality of 
decisions to address critical issues immediately.
For more details please refer datasheet.
 

Light Meter with Connectivity to ExView® App - Extech LT250W - EXTECH
Product Overview

The LT250W is a compact light meter with Bluetooth® 
connectivity, which allows building and maintenance 
professionals to view and share light intensity data 
directly from a mobile device using the free ExView app. 
With the capability to capture data, display trends, 
set visual and audio alarms, and create and send reports,
users can gain deeper insights on workplace comfort 
and building health. 
The LT250W is part of the Extech 250W Connected Series 
of products that can improve your ability to evaluate 
problems and report on them from the field. 
This allows you to improve the speed and quality 
of decisions to address critical issues immediately.
For more details please refer datasheet.

Hygro-Thermometer with Connectivity to ExView® App - Extech RH250W - EXTECH
Product Overview

The Extech RH250W is a compact Hygro-Thermometer 
with Bluetooth® connectivity, which allows building 
and maintenance professionalsn to view and 
share relative humidity and temperature data directly
from a mobile device using the free ExView app. 
With the capability to capture data, display trends, 
set visual and audio alarms, and send reports, users 
can gain deeper insights on equipment and building health.
Relative Humidity:0 to 100% RH
Relative Humidity Basic Accuracy:±5% RH
Relative Humidity Max Resolution:0.1% RH
Response Time:1 sec
For more details please refer datasheet.

Laser Tachometer with Connectivity to ExView® App - Extech RPM250W - EXTECH
Product Overview

The Extech RPM250W is a compact Laser Tachometer 
with Bluetooth® connectivity, which allows 
building and maintenance professionals to view 
and share revolutions per minute (RPM) data of 
rotating objects directly from a mobile device 
using the free ExView® app. With the capability 
to capture data, display trends, set visual 
and audio alarms, and send reports, users can 
gain deeper insights on equipment health.
Measurement Angle:±30° from perpendicular
Measurement Distance:50 to 500 mm
Revolution Count (Photo):0 to 99999
For more details please refer datasheet.

Sound Meter with Connectivity to ExView® App - Extech SL250W - EXTECH
Product Overview

The Extech SL250W is a compact Sound Meter 
with Bluetooth® connectivity, which allows 
building and maintenance professionals to 
view and share sound level data directly from 
a mobile device using the free ExView® app. 
With the capability to capture data, display trends,
set visual and audio alarms, and send reports, 
users can gain deeper insights on 
workplace comfort and public health.
Frequency Bandwidth    31.5 Hz to 8 kHz
Response Time:Fast/Slow
For more details please refer datasheet.
 

Passive Component LCR Meter - Extech LCR200 - EXTECH
Product Overview

The LCR200 is a passive component LCR meter. 
Discover the tremendous value with a range of 
features that help this meter provide the precise 
measurements you need. 
See simultaneous 20,000/2,000 count display of the 
primary parameter on the high contrast backlit display. 
You can set Hi/Lo limits using absolute values or percentages.
Open and Short Zero removes unwanted stray impedances 
from the measurement. 
Use the built-in test fixture or external test leads (included).
The LCR200 has an Auto Power Off function that can also 
be disabled and a low battery indicator to alert 
you when to replace the batteries.
For more details please refer datasheet.

9 Function Pen Multimeter + NCV - Extech 381676A - EXTECH
Product Overview

The Extech 381676A is a Pen Styled Multimeter 
with a Built in NCV detector. 
The 381676A features nine functions including
AC/DC voltage to 600V, AC/DC Current to 200mA, 
Resistance, as well as Logic, Diode and 
Continuity tests. 
This meter has an easy to use rotary dial
with alligator clips for one handed operation.
Its convenient built in non-contact voltage 
detector allows for quick detection of live voltage. 
The 381676 comes complete with test leads, 
alligator clips, batteries and manual.
For more details please refer datasheet.

Mini Pocket MultiMeter with Non-Contact Voltage Detector - Extech DM220 - EXTECH
Product Overview

This Mini Pocket MultiMeter has a large high 
contrast 4000 count LCD display, Non-Contact 
Voltage detection for identifying live circuits, 
and a built-in Flashlight. 
It measures AC/DC Voltage, AC/DC Current, Resistance,
Frequency, Duty Cycle, Diode Test and has a 
Continuity Beeper. 
Additional features include: built-in storage clips for 
integrated test leads, double molded housing to provide 
extra protection, over-range and low battery indication.
Complete with test leads and 2 AAA batteries.
For more details please refer datasheet.
 

9 Function Mini MultiMeter - Extech EX310 - EXTECH
Product Overview

The Extech EX310 is a compact manual ranging 
multi meter which features an extra-large 2000 
count display and built-in non-contact 
AC voltage detector (NCV). 
AC/DC Voltage & Current, Resistance,
Diode/Continuity measurements. 
Includes a battery test function (1.5V and 9V). 
The rubber holster protects the meter. 
UL listed Cat III – 600 Volt safety rating. 
Includes test leads, 9 Volt battery, and tilt stand.
AC Current:0.1mA to 10A
AC Voltage:0.1V to 600V
For more details please refer datasheet.

12 Function Mini MultiMeter+Non-Contact Voltage Detector - Extech EX330 - EXTECH
Product Overview

The EX330 is a compact autoranging multimeter 
which features extra large 4000 count display
and a built-in non-contact AC voltage detector.
Advanced function include Frequency, Duty Cycle, 
Capacitance and Temperature, Diode test and continuity. 
Rubber holster protects meter. Includes test leads, 
Type K temperature probe, two AAA batteries and tilt stand.
AC Current:0.1µA to 10A
AC Voltage:0.1mV to 600V
Capacitance:0.001nF to 200µF
Continuity :Yes
For more details please refer datasheet.

11 Function True RMS Multimeter + NCV - Extech EX350 - EXTECH
Product Overview

The EX350 is a professional DMM loaded 
with advanced features and functions. 
Low Impedance (LoZ) mode eliminates false 
readings caused by ghost voltages. Low Pass 
Filter (LPF)attenuates high frequencies to 
reduce noise for accurate readings. 
True RMS provides accurate readings when 
measuring distorted or noisy waveforms. 
Built-in Non-Contact AC Voltage Detector 
quickly checks for the presence of AC Voltage 
before testing. 
Features a 4000 count LCD display, data hold..
For more details please refer datasheet.
 

12 Function True RMS Multimeter + NCV - EX355 - EXTECH
Product Overview

The EX355 is a professional DMM loaded with 
advanced features and functions. 
Low Impedance (LoZ) mode eliminates false 
readings caused by ghost voltages. 
Low Pass Filter (LPF)attenuates high frequencies 
to reduce noise for accurate readings. 
True RMS provides accurate readings when measuring 
distorted or noisy waveforms.
Built-in Non-Contact AC Voltage Detector quickly 
checks for the presence of AC Voltage before testing.
Features a 6000 count LCD display, data hold, min-max,
relative mode, capacitance zero, auto power off, 
continuity and diode test.
For more details please refer datasheet.

10 Function True RMS Multimeter - Extech EX365 - EXTECH
Product Overview

Extech EX365 is a industrial True RMS Multimeter 
with a built in non-contact voltage detector. 
It features highly accurate True RMS measurements, 
LoZ for the prevention of false readings caused by 
ghost voltages, .5 % basic accuracy, a 1000V AC/DC 
volt range, and resistance up to 40 MΩ. 
It also has a continuity beeper with visual alert,
smart data hold, peak hold, auto power off with disable, 
relative mode for capacitance zero, and offset adjustment. 
Additionally, the EX365 excels in frequency and capacitance 
measurements as well as commercial applications that require 
AC/DC current measurements from 1 mA to 10 A. 
For more details please refer datasheet.

8 Function Professional MultiMeter - EX410A - EXTECH
Product Overview

Extech EX410A Eight-Function True RMS Professional
MultiMeter provides the versatility of multiple meters
in one convenient device. The EX410A measures AC/DC 
voltage and current, resistance, diode, and temperance.
A large, backlit display and 1-inch high digits allow for
easy reading, while the ergonomically designed housing 
offers comfortable, one-handed operation. 
Comes with Multimeter, CAT III test leads, stand, 
hanging strap, holster with built-in test lead storage, 
Type K bead wire temperature probe, and battery.
AC Current    0.1mA to 10A
AC Voltage    1mV to 600V
For more details please refer datasheet.

8 Function True RMS Professional MultiMeter - EX411A - EXTECH
Product Overview

The Extech EX411A offers multiple functions 
so you can carry one meter into the field 
instead of several. 
The manual-ranging EX411A measures AC/DC voltage 
and current, resistance, diode, and continuity,
all with ±0.5% basic accuracy. 
The unit has low current capability, measuring down
to 0.1 µA, and features input fuse protection and 
mis-connection warnings.
Comes with CAT III test leads, stand, hanging strap, 
holster with built-in test lead storage, 
Type K bead wire temperature probe, and one 9 V battery.
For more details please refer datasheet.

11 Function True RMS Professional MultiMeter - EX430A - EXTECH
Product Overview

The Extech EX430A True RMS autoranging Multimeter 
(with K Type,capacitance,frequency and duty cycle) 
is a professional-grade multimeter capable of 
performing a wide range of measurements.
Functions include AC and DC voltage to 600 V, 
AC and DC current to 10 A, resistance to 40 MOhm, 
continuity, and diode test. 
It also includes a Type K thermometer function for
contact or air temperature measurements from 
-20°C to 750°C (-4°F to 1832°F).
Advanced functions include capacitance, 
frequency, and duty cycle. 
For more details please refer datasheet.

12 Function True RMS Professional MultiMeter + InfraRed Thermometer - EX470A - EXTECH
Product Overview

The Extech EX470A True RMS Multimeter 
and Infrared Thermometer with capacitance, 
frequency, and duty cycle measurements and 
2 Type K remote probes is the perfect meter 
for HVAC or plant maintenance. 
The IR thermometer measures surface temperature 
from -20°C to 270°C (-4°F to 518°F) without contact. 
The built-in laser pointer centers the measuring area. 
Its functions include AC and DC Voltage to 600 V, 
AC and DC current to 10 A, resistance to 40 MOhm,
continuity,and diode test. 
For more details please refer datasheet.

10 Function Heavy Duty Industrial MultiMeter - EX503 - EXTECH
Product Overview

Extech EX503 offers an array of must-have multimeter
measurements including capacitance, frequency
(dual sensitivity for electrical and electronic
applications),diode test,and continuity. 
Other features include data hold and relative hold, 
and manual or auto-ranging modes. 
\The latter automatically adjusts the measurement 
range based on the detected source such as electrical 
components and electronic equipment.
The meter features 0.5 percent accuracy and a 
CAT IV-600-volt safety rating, protecting users
even on outdoor wiring. 
For more details please refer datasheet.

Heavy Duty True RMS Industrial Multimeter - EX505A - EXTECH
Product Overview

The EX505A heavy duty true RMS industrial multimeter
measures AC/DC voltage, current, resistance, capacitance, 
dual sensitivity frequency(electric 1 kHz/electronic 10 MHz),
type K thermocouple -20°C to 760°C (-4°F to 1400°F), and 
bead wire temperature probe -20°C to 250°C (-4°F to 482°F). 
It features a 6000 count backlit LCD screen, 0.5% basic accuracy,
relative/data hold, and an auto power function.
With a CAT IV-600 V safety rating and an IP67 rating for water
and dust, the EX505A is an ideal tool for electricians, 
HVAC technicians and benchtop technicians who require accuracy, d
urability, and safety in their electrical testing equipment. 
For more details please refer datasheet.

11 Function Heavy Duty True RMS Industrial MultiMeter - EX520 - EXTECH
Product Overview

Designed to withstand harsh environments and usage, 
the meter's rugged, double-molded housing is IP67-rated 
(waterproof and dustproof) and drop-tested to 6 ft. 
The large, illuminated LCD displays 4-digit readout 
(to 6,000 counts). 
The EX520 offers various must-have measurements. 
The meter features 0.09 percent accuracy and a 
CAT IV 600-volt safety rating, protecting users
even on outdoor wiring. Product includes a 
3 year warranty, double molded test leads, 
9V battery, magnetic hanging strap, 
temperature probe and carrying case.
For more details please refer datasheet.
 

Heavy Duty True RMS Industrial Multimeter - EX520A - EXTECH
Product Overview

The EX520A heavy duty true RMS industrial multimeter 
measures AC/DC voltage, current, resistance, 
capacitance, dual sensitivity frequency 
(electric 1 kHz/electronic 10 MHz), 
type K thermocouple -45°C to 760°C 
(-50°F to 1400°F),and bead wire temperature probe
-20°C to 250°C (-4°F to 482°F). 
It features a 6000 count backlit LCD screen, 
0.09% basic accuracy, relative/data hold, and auto 
an auto power function. 
With a CAT IV-600 V safety rating and an IP67 
rating for water and dust resistance.
For more details please refer datasheet.

11 Function Heavy Duty True RMS Industrial MultiMeter - EX530 - EXTECH
Product Overview

The EX530 is ideal for use in the outdoors, 
on boats, and in any harsh industrial environment.
It has a double molded housing and is drop-proof 
up to six feet with a safety rating of CAT IV 
600 Volt and CAT III 1000 Volt. 
It measures AC/DC voltage and current, resistance, 
capacitance, electronic and electrical frequency, 
temperature, 4 to 20 mA, and duty cycle. 
Additional features include: 0.06% basic accuracy, 
continuity beeper, diode test (2.8 Volt open circuit voltage), 
40000 count resolutions, backlit LCD with barograph, peak hold,
data hold and 1000 Volt input protection for all functions. 
For more details please refer datasheet.
 

Heavy Duty True RMS Industrial Multimeter - EX530A - EXTECH
Product Overview

The EX530A multimeter is ideal for use 
in the outdoors, on boats, and in any 
harsh industrial environment. 
Waterproof to IP67 standards, it has a 
double molded housing and is drop-proof 
up to 2 m (6.5 ft) with a safety rating 
of CAT IV-600 V. 
It measures AC/DC voltage and current, 
resistance, capacitance, electronic and 
electrical frequency, temperature, 4 mA 
to 20 mA, and duty cycle.
Basic accuracy: ±0.06% 
For more details please refer datasheet.

Wireless Datalogging CAT IV True RMS Multimeter - MM750W - EXTECH
Product Overview

Extech’s MM750W is a fully loaded, rugged,
Datalogging Multimeter with 14 functions. 
It includes non-contact AC voltage detection 
and Type-K temperature measurement.
Using the wireless feature and the free ExView® 
W-Series App, you can transmit readings in 
real-time to your smart devices, store over 15K
readings for wireless transfer to generate a 
report/data analysis, add notes and readings to
photos taken from your smart device camera, 
and use your smart device as a 2nd display for 
easy viewing or sharing. 
For more details please refer datasheet.

Digital Mini MultiMeter - MN35 - EXTECH
Product Overview

The MN35 is a convenient mini size multimeter 
with protective rubber holster and tilt stand.
Manual ranging, measures AC and DC Voltage to 600V, 
Resistance with Continuity and Diode functions, 
DC Current to 10A,Temperature and 9V/1.5V Battery test.
Includes protective rubber holster, 9V battery, 
test leads and Type K thermocouple probe. 
AC Voltage:600V
AC Voltage Basic Accuracy:±1.2%
AC Voltage Max Resolution:0.1V
Battery Test:9V and 1.5V
DC Current:10A
For more details please refer datasheet.

Digital MIni Multimeter - MN36 - EXTECH
Product Overview

The Extech MN36 digital multimeter 
is compact but still packed with features. 
Capable of measuring AC and DC voltage 
up to 600 volts, the MN36 is autoranging, 
which means it automatically displays 
readings with the proper decimal place 
location and maximum resolution. 
Comes with protective rubber holster,
2xAAA batteries, bead wire Type K temp. 
probe and test leads.
AC Voltage Basic Accuracy: ±1.2%
AC Voltage Max Resolution: 0.1V
For more details please refer datasheet.

2000A True RMS AC/DC Clamp Meter - Extech 380926 - EXTECH
Product Overview

The Extech 380926 is a category IV, 2000-Amp,
TRMS AC/DC clamp meter with a rugged 2 in. 
jaw to accommodate two 500 MCM cables. 
A built-in full-function DMM can measure 
AC/DC voltage and current, resistance, 
capacitance, frequency, duty cycle, 
diode and continuity.
Measurements are displayed on the 
large 4000 count backlit display for
easy viewing in dimly lit areas. 
Additional features include DCA push 
button zero, Data Hold and Relative function.
For more details please refer datasheet.

200A AC/DC Mini Clamp Meter - 380941 - EXTECH
Product Overview

The compact Extech 380941 is a 200 Amp 
mini AC/DC clamp meter with a small diameter 
jaw designed to reach in small areas while 
providing 10mA resolution (DC) and very 
low-current sensitivity. 
This mini clamp meter is useful for 
troubleshooting tasks in plant maintenance, 
electrical, HVAC, and telecom work, as well as
home electrical, fleet maintenance, marine, 
and motorcycle repairs. The 380941 has a CAT III 
300-Volt safety rating and a one year warranty.
Comes with batteries and manual.
For more details please refer datasheet.

30A True RMS AC/DC Mini Clamp Meter - 380942 - EXTECH
Product Overview

Extech 380942 is a 30 Amp mini AC/DC clamp meter. 
The clamp meter has a remarkable 0.1mA resolution (AC), 
very low-current sensitivity, and a small diameter 
jaw designed to reach into small areas. 
The 30 Amp range with 0.1mA (AC) and 1mA (DC) resolution
is optimized for finding problems where very low current
variances would be missed by standard clamp meters.
This mini clamp meter is useful for troubleshooting tasks
in plant maintenance, electrical, HVAC, and telecom work, 
as well as residential electrical, fleet maintenance, 
marine, and motorcycle repairs. 
This CAT III-rated True RMS mini clamp meter comes 
with test leads, 2 AA batteries and user manual.
For more details please refer datasheet.

80A Mini AC/DC Clamp Meter - 380950 - EXTECH
Product Overview

Extech 380950 is a mini AC/DC clamp meter. 
The 380950 has an extra-small diameter 
jaw designed to reach into very small areas 
while providing a 1 mA resolution and very 
\low-current sensitivity. 
This amp clamp performs essential troubleshooting
tasks in plant maintenance, electrical, HVAC, 
and telecom work as well as residential, 
automotive, fleet maintenance, marine, 
and motorcycle electrical repair. 
Complete with test leads, two 1.5V AAA
batteries and carrying case.
For more details please refer datasheet.

400A Dual Input AC/DC Clamp Meter, NCV, IR Thermometer - EX623 - EXTECH
Product Overview

This TRMS AC/DC Clamp Meter has dual 
thermocouple inputs for T1, T2, T1-T2
Differential Temperature measurement
plus a built-in Infrared Thermometer 
with laser pointer for locating hot 
spots and NCV Detector. 
Additional features include: 
DC micro-amp function for flame rod 
measurements, Diode open circuit voltage 
of 2.8 Volt, Data Hold plus fast Peak Hold 
for capturing current surges at motor startup, 
and capacitance measurement to 40mF.
For more details please refer datasheet.

600 A Dual Input Clamp Meter with IR Thermometer & NCV - EX623A - EXTECH
Product Overview

The EX623A True RMS AC/DC clamp meter combines
dual thermocouple inputs for T1, T2, and T1-T2
differential temperature measurement.
It comes with a built-in infrared 
thermometer and a laser pointer for 
pinpointing hot spots and a Non-Contact 
Voltage (NCV) detector,so you can safely 
check for live electrical current. 
It features a DC micro-amp function that 
is ideal for flame rod measurements in 
HVAC systems, and its capacitance measurement
capability extends up to 40 mF. 
For more details please refer datasheet.

600A True RMS AC/DC Clamp Meter + NCV - EX655 - EXTECH
Product Overview

The EX655 is a 600A True RMS AC/DC Clamp meter. 
This clamp meter also measures AC/DC voltage, 
resistence, capacitance, frequency, temperature, 
continuity/diode test and has an NCV detector. 
The EX655 has a 1.18" jaw size which accomodates
conductors up to 350 MCM. 
This meter also features a 6000 count backlit
LCD display, data hold, min/max, relative function,
low pass filter, inrush mode, DC zero function, 
LCD trending bargraph, auto power off and a 
convenient LED worklight. 
For more details please refer datasheet.

1000A AC Clamp Meter with IR Thermometer - EX810 - EXTECH
Product Overview

The EX810 Clamp meter features a built-in 
IR thermometer with laser pointer for 
non-contact surface measurements from 
-58 to 518 degrees Fahrenheit 
(-50 to 270 degrees Celsius). 
Clamp measures AC current up to 1000 Amp 
with a maximum resolution of 0.1 Amp. 
The 1.7 in. jaw fits around conductors up to 750MCM.
Peak hold captures motor inrush currents and other surges. 
Data hold and auto power off functions.
Include AC/DC voltage, resistance, capacitance and frequency. 
Complete with test leads, 9 Volt battery and case.
For more details please refer datasheet.

1000 A True RMS AC Clamp Meter with IR - EX820A - EXTECH
Product Overview

The EX820A clamp meter features a unique, built-in,
non-contact infrared thermometer with laser pointer
to monitor temperature and locate hot spots on motors
and electrical devices. 
A large 6000 count LCD display with bright back lighting 
allows you to easily see readings in dim light. 
Its ergonomically designed double-molded housing offers 
a better grip for one-handed operation and the 
43 mm (1.7 in) diameter jaw opening is large enough for 
conductors up to 750 MCM or two 500 MCM.
With 1000 A True RMS measurements and a CAT IV-600V 
safety rating, the EX820A is ideal for electricians,
and plant maintenance professionals.
For more details please refer datasheet.

1000A True RMS AC/DC Clamp Meter - EX830 - EXTECH
Product Overview

The EX830 clamp meter features a unique, 
built-in, non-contact Infrared thermometer 
with laser pointer to monitor temperature 
and locate hot spots on motors and electrical 
devices. A large 4000 count LCD display with 
bright back lighting allows you to see 
the reading in dim light. 
The 1.7" (43 mm) diameter jaw opening is large 
enough for conductors up to 750MCM. In addition 
to AC/DC current, it measures AC/DC voltage, 
resistance, temperature, capacitance, and frequency.
For more details please refer datasheet.

1000A AC/DC True RMS Clamp/DMM - EX840 - EXTECH
Product Overview

This CAT IV True RMS clamp meter features
a built-in IR thermometer with laser pointer
for non-contact surface measurements from -58 
to 518 °F (-50 to 270 °C). 
Clamp measures AC current up to 1000 Amp with 
a maximum resolution of 0.1 Amp. The 1.7-inch 
jaw fits around conductors up to 750MCM. 
Peak hold captures motor inrush currents 
and other surges. 
Data hold and auto power off functions. 
Other functions include AC/DC Voltage, resistance, 
Type K thermometer, capacitance and frequency. 
For more details please refer datasheet.

1000 A Clamp Meter with IR Thermometer - EX840A - EXTECH
Product Overview

The EX840A clamp meter features a unique, 
built-in, non-contact infrared thermometer 
with laser pointer to monitor temperature and 
locate hot spots on motors and electrical devices. 
A large 6000 count LCD display with bright back 
lighting allows you to see the reading in dim light.  
With 1000 A True RMS measurements, measurement of
AC/DC current, and a CAT IV-600 V safety rating, 
the EX840A is ideal for electricians, electrical 
contractors, and plant maintenance professionals.
For more details please refer datasheet.

200A AC/DC Mini Clamp Meter+Voltage Detector - MA120 - EXTECH
Product Overview

The MA120 is a 200 Amp AC/DC mini clamp meter 
with built-in AC voltage detector and built 
in LED flashlight. 
The meter measures Frequency up to 1 kHz with 
0.01Hz resolution, auto ranges with auto power
off and data hold functions. Complete with a 
year warranty, 2 AAA batteries and soft case.
AC Current Basic Accuracy: ±3.0%
AC Current Max Resolution: 100mA
DC Current: 200A
DC Current Basic Accuracy: ±3%
For more details please refer datasheet.

1500A True RMS AC/DC Clamp Meter + NCV - MA1500 - EXTECH
Product Overview

The MA1500 is a 1500A True RMS AC/DC Clamp Meter. 
2.0 in. (52mm) jaw size for conductors up to 500MCM 
with True RMS for accurate readings of 
non-sinusoidal waveforms. Additional features include: 
Relative Mode for Capacitance Zero and Offset Adjustment,
Data Hold, Peak Hold, MIN/MAX, Auto Power Off, and 
Inrush function to capture transients during motor startup. 
Complete with test leads, Type K bead wire temperature 
probe, 9V battery and carrying case.
Capacitance Max Resolution    0.01nF
DC Current: 400.00A, 1500.0A
DC Current Max Resolution: 0.01A
For more details please refer datasheet.

3000A True RMS AC Flex Clamp Meter - MA3018 - EXTECH
Product Overview

The Extech MA3018 is a 3000 A True RMS AC Flex Clamp Meter. 
The MA3018 features an 45.7 cm (18 in) flexible 
clamp with LCD monitor. The True RMS measurements 
are for accurate readings of noisy, distorted, 
or non-sinusoidal waveforms. 
Complete with two AAA batteries. 
UL listed and CAT IV 600V safety rating.
AC Current: 0 to 30.00A,30.00 to 300.0A,300.0 to 3000A
AC Current Basic Accuracy: ±(3% of reading + 5 digits)
AC Current Max Resolution: 0.01A
Jaw Size:18" (45.7cm)
True RMS: Yes
For more details please refer datasheet.

400A AC Clamp Meter + NCV - MA440 - EXTECH
Product Overview

Three models to choose from, with or without 
True RMS and AC or AC/DC Current functions. 
Choose True RMS model for accurate readings 
of non-sinusoidal waveforms, model with 
DC Current function for automotive applications,
or model with Type K function when applications
require Temperature measurements.
The MA440 Series meters are fully loaded 
with multimeter functions and built-in non-contact 
voltage (NCV) detector to meet your application needs!
Diode Test: Yes
Frequency: 1MHz
For more details please refer datasheet.

400A True RMS AC Clamp Meter + NCV - MA443 - EXTECH
Product Overview

Three models to choose from, with or without 
True RMS and AC or AC/DC Current functions. 
Choose True RMS model for accurate readings 
of non-sinusoidal waveforms, model with 
DC Current function for automotive applications,
or model with Type K function when applications
require Temperature measurements.
The MA440 Series meters are fully loaded 
with multimeter functions and built-in non-contact 
voltage (NCV) detector to meet your application needs!
Diode Test: Yes
Frequency: 1MHz
For more details please refer datasheet.

400A True RMS AC/DC Clamp Meter + NCV - MA445 - EXTECH
Product Overview

Three models to choose from, with or without 
True RMS and AC or AC/DC Current functions. 
Choose True RMS model for accurate readings 
of non-sinusoidal waveforms, model with 
DC Current function for automotive applications,
or model with Type K function when applications
require Temperature measurements.
The MA445 Series meters are fully loaded 
with multimeter functions and built-in non-contact 
voltage (NCV) detector to meet your application needs!
Diode Test: Yes
Frequency: 1MHz
For more details please refer datasheet.

60A True RMS AC/DC Clamp Meter + NCV - MA63 - EXTECH
Product Overview

The MA63 is an AC/DC current clamp with NCV 
voltage detector and full overload protection. 
The 6000mA range allows for low current
measurements that may be used in the 
automotive industry.
Unique VFC (variable frequency control) mode helps
troubleshoot and diagnose HVAC applications that
are variable frequency driven. 
The MA63 also features resistance, capacitance, 
frequency, diode and continuity measurements 
as well as data hold low battery indicator, 
and auto power off functions. 
For more details please refer datasheet.

Autoranging Digital Megohmmeter - 380260 - EXTECH
Product Overview

The Extech 380260 measures resistance up to 2000MΩ. 
Choice of 250, 500 or 1000VDC test voltages. 
The large backlit dual display indicates test 
voltage output and insulation resistance.
Low resistance, continuity and AC/DC v
oltage measurement functions. 
Other features include automatic discharge at the 
end of test, protective holster with stand, 
power lock on feature and data hold. 
Complete with test leads,
carrying case and 6 AA batteries.
For more details please refer datasheet.

Analog Insulation Tester - 380320 - EXTECH
Product Overview

The Extech 380320 is an Analog Insulation Tester 
with a large, easy to read analog display. 
It features a live circuit warning which displays 
the actual AC voltage measurement. 
It also includes an automatic discharge circuit, 
lock power on feature for extended test times, 
and insulation resistance up to 400 MΩ. 
Complete with heavy duty test leads, 
alligator clip test lead, 6 AA batteries, 
hanging strap, and hard carrying case.
AC Voltage: 0 to 600V
AC Voltage Basic Accuracy: ±5% of scale    
For more details please refer datasheet.

High Voltage Digital Insulation Tester (110V) - 380395 - EXTECH
Product Overview

With the Extech 380395,measure insulation resistance up 
to 60 GΩ with test voltages of 500V,1000V,2500V and 5000V. 
Its features include polarization index measurement (PI), 
dielectric absorption ratio measurement (DAR), AC/DC voltage 
measurement up to 600 V, peak and relative functions, 
and a 1 min to 15 min timer function for IR measurements. 
Comes with test leads, eight C batteries, 120 V AC adaptor,
heavy duty carrying case, and a user manual.
Insulation Resistance Basic Accuracy: ±2.5% of reading
Insulation Test Voltage    500V, 1000V, 2500V, 5000V
Resistance: 0 to 600Ω
DC Voltage Basic Accuracy: ±1% of reading
For more details please refer datasheet.

High Voltage Digital Insulation Tester (220V) - 380396 - EXTECH
Product Overview

With the Extech 380395,measure insulation resistance up 
to 60 GΩ with test voltages of 500V,1000V,2500V and 5000V. 
Its features include polarization index measurement (PI), 
dielectric absorption ratio measurement (DAR), AC/DC voltage 
measurement up to 600 V, peak and relative functions, 
and a 1 min to 15 min timer function for IR measurements. 
Comes with test leads, eight C batteries, 120 V AC adaptor,
heavy duty carrying case, and a user manual.
Insulation Resistance Basic Accuracy: ±2.5% of reading
Insulation Test Voltage    500V, 1000V, 2500V, 5000V
Resistance: 0 to 600Ω
DC Voltage Basic Accuracy: ±1% of reading
For more details please refer datasheet.

Precision Milliohm Meter (110V) - 380460 - EXTECH
Product Overview

380460 is a Precision Milliohm Meter. 
High accuracy and performance for low resistance 
measurements. Portable milliohm meter provides 
resolution to 0.1mΩ. 
Compact, durable field service housing 
with protective cover.
Manual zero display adjust and overrange indication.
Complete with 4-wire cables with Kelvin clip connectors.
Overrange indication
Compact,durable field service housing with protective cover
Complete with 4-wire cables with Kelvin clip connectors
For more details please refer datasheet.

Precision Milliohm Meter (220V) - 380462 - EXTECH
Product Overview

The Extech 380462 is a Precision Milliohm Meter (220 V). 
Performance for low resistance measurements. 
Equipped with a large 18 mm, 1999 count LCD screen. 
Featuring manual, zero display adjust and overrange indication.
CE certified. 
Complete with 4-wire cables with Kelvin clip connectors.
Overrange indication
Compact, durable field service housing with protective cover
Complete with 4-wire cables with Kelvin clip connectors
High accuracy and performance for low resistance measurements
For more details please refer datasheet.

High Resolution Precision Milliohm Meter (110VAC) - 380560 - EXTECH
Product Overview

The 380560 benchtop meter provides resolution 
down to 0.01mΩ using 4-wire Kelvin clip test leads.
Featuring 7 ranges for wide low resistance 
measurements, 1999 count display with 0.8" digits,
automatic zero function.
Built-in comparator for Hi/Lo/Go
resistance testing or selection. 
Complete with 4-wire cables with Kelvin 
clip connectors and power cord.
For more details please refer datasheet.

Extech 380562 High Resolution Precision Milliohm Meter (220 VAC) - 380562 - EXTECH
Product Overview

The Extech 380562 Milliohm Meter has 7 ranges
and measures down to 0.01 mΩ using 
4-wire Kelvin clip test leads. 
Measurements are displayed on the unit's 
large 20.3 mm (0.8 in), 1999-count LCD. 
It comes with a built-in comparator for 
Hi/Lo/Go resistance testing or selection. 
Complete with 4-wire cables with Kelvin
clip connectors and power cord.
7 ranges for wide low resistance measurements
Built-in comparator for Hi/Lo/Go
resistance testing or selection
For more details please refer datasheet.

Battery Powered Milliohm Meter - 380580 - EXTECH
Product Overview

The 380580 is a Battery Powered Milliohm Meter. 
This milliohm meter features a high accuracy,
a high resolution, portable milliohm meter 
battery operated for field use, four terminal 
Kelvin measurements, and Over-temperature and
over-voltage protection. CE certified. 
Complete with 8AA batteries, and 2 sets of test leads 
(4 wire with 4 alligator clips and 4 wire with 
2 Kelvin alligator clips).
Four terminal Kelvin measurements
Over-temperature and over-voltage protection
5 ranges with 100μ max resolution 
For more details please refer datasheet.
 

Earth Ground Resistance Tester Kit - 382252 - EXTECH
Product Overview

The 382252 is an Earth Ground Resistance Tester
Kit which includes all hardware necessary to 
measure earth ground in 3 ranges from 20 to 2000 Ohms. 
Also tests AC/DC Voltage, resistance and continuity. 
Featuring Automatic zero adjustment and three earth
ground resistance ranges 20Ω/200Ω/2000Ω. 
Complete with test leads, 2 auxiliary earth bars,
carrying case, protective rubber holster 
and six 1.5V AA batteries.
AC Voltage: 0 to 750V
AC Voltage Basic Accuracy: 1V
DC Voltage: 0 to 1000V
For more details please refer datasheet.

Clamp-on Ground Resistance Tester - 382357 - EXTECH
Product Overview

The 382357 is a Clamp-On Ground Resistance Tester that 
enables non-contact measurements of ground conductors. 
True RMS AC Leakage current range of 0.2mA to 30A 
with 1.000mA resolution. 
Programmable Datalogging with 116 data points. 
Performs without the need for auxiliary spikes. 
Complete with 9V battery,
Resistance check plate and durable metal storage case.
Programmable Hi/Lo alarm
0.9" (23mm) Jaw size for large ground rods
9999 Count LCD display with Data Hold
0.9" (23mm) Jaw size for large ground rod
For more details please refer datasheet.

4-Wire Earth Ground Resistance Tester - GRT300 - EXTECH
Product Overview

The GRT300 measures earth ground in 4 ranges 
from 2 to 2000 Ohm. 
4-wire, 3-wire, and 2-wire testing. 
Large dual line LCD. 
Automatic I (current) and P (potential) spike check. 
Test Hold function for easy operation. Autoranging
Automatic Zero adjustment,Data Hold and Auto Power off. 
AC Earth Voltage. 
Overrange and low battery indication. 
Complete with test leads with alligator clips, 
4 auxiliary earth bars, hard carrying case,
and eight 1.5V AA batteries.
For more details please refer datasheet.

Digital Insulation Tester - MG310 - EXTECH
Product Overview

The MG310 is a Compact Insulation Resistance Tester 
which allows quick and easy testing/troubleshooting 
of motors, transducers, and other industrial appliances.
Wide range measurement up to 1000V with Insulation 
Resistance to 5.5GΩ. 
Includes an easy snap on protective hard cover and 
soft pouch to conveniently transport your meter and
accessories to the next job site or to safely store away.
Featuring Low Resistance measurement with Zero function,
Continuity beeper, Large 2000 count dual display with 
backlight, High voltage and overload indication, 
For more details please refer datasheet.

CAT IV Insulation Tester/True RMS MultiMeter - MG320 - EXTECH
Product Overview

Combines a portable 20GΩ/1000V Insulation Tester 
with a True RMS MultiMeter.
Insulation tester includes PI/DAR modes,
programmable timer, and a comparator for custom
test configurations and quick results. 
Multimeter functions include AC/DC Voltage, 
Resistance, and Continuity Test. 
Manually store/recall up to 99 readings. 
Designed with rugged housing and large backlit 
6,000 count LCD display with analog bargraph. 
Complete with test leads, alligator clip, 
6 x AA batteries, and soft cas
For more details please refer datasheet.

Digital High Voltage Insulation Tester - MG500 - EXTECH
Product Overview

The MG500 is a digital high voltage insulation tester
that tests voltage up to 10kV and measures 
insulation resistance to 500GOhm.
The MG500 has a CAT III 300 Volt safety rating. 
This product is complete with a year warranty, 
built-in heavy duty carrying case with cover, 
test leads, alligator clips, and 8 x C batteries.
Resolution: 1kΩ
Basic Accuracy: ±5%
Test Voltages:500VDC to 10kVDC(adjustable in 500V steps)
Preset Buttons : 1kV, 2.5kV, 5kV, 10kV
For more details please refer datasheet.

High Resolution Micro-Ohm Meter - UM200 - EXTECH
Product Overview

The Extech UM200 is a precision Micro-Ohm Meter 
which features a resolution down to 1 µΩ. 
The UM200 has 6 ranges with 3 sub-ranges
in each current range.
It features a 5-Digit backlit LCD, PC interface, 
auto or manual ranging, and a 10A 
maximum test current.
Store/Recall up to 3000 measurements. 
Complete with 4-wire cables with Kelvin clip 
connectors, rechargeable Li-Polymer battery,
AC adapter/charger, software and USB cable,
and soft carrying case.
For more details please refer datasheet.

Flat Surface Stem Dial Thermometer - 392052 - EXTECH
Product Overview

The Extech 392052 is a Flat Surface Stem Dial Thermometer
with a temperature range of -50°C to 300°C ±2°C 
(-58°F to 572°F ±2°F). 
Ideal for measuring high temperatures on motors 
and other flat surfaces. 
The thermometer features a 12.7 cm (5 in) stainless 
steel shaft with a 5.1 cm (2 in) dial, an on/off switch, 
and auto power off function after one hour.
Product includes 1.5 V battery button.
Temperature: -58 to 572°F(-50 to 300°C)
Temperature Max Resolution:
0.1°C/F to 199.9°C/F, 1°C/F > 199.9°C/F
For more details please refer datasheet.

Waterproof Stem Thermometer - 39240 - EXTECH
Product Overview

Extech's 39240 is a waterproof stem thermometer. 
This stem thermometer is pocket sized with a 
digital display featuring 0.1° resolution 
and min/max recording. 
It measures temperature in frozen solids 
and liquids using the 2.75 in. 
(70 mm) stainless steel stem. 
Temperature measurements from -40 to 392°c.
MAX/MIN recall of high and low temperatures as 
well as Data Hold and Auto power Off features. 
Complete with one LR44 button battery
and protective cover.
For more details please refer datasheet.
 

Pocket Fold up Thermometer with Adjustable Probe - 39272 - EXTECH
Product Overview

The Extech 39272 is a Pocket Fold up Thermometer
with Adjustable Probe. 
It includes a 11.4 cm (4.5 in) stainless 
steel probe that adjusts at detents in 4 positions 
(45, 90, 135, and 180 Degrees). 
It measures temperature -50°C to 300°C 
(-58°F to 572°F) ± 1°C (± 1.8°F).
Features data hold, min/max and an 
auto power off.
Comes complete with wrist strap and AAA battery.
Temperature (Contact):-58 to 572°F (-50 to 300°C)
For more details please refer datasheet.

Wide Range Mini IR Thermometer - 42510A - EXTECH
Product Overview

The Extech 42510A Wide Range Mini IR Thermometer 
measures temperature from -50°C to 650°C 
(-58°F to 1200°F) with 0.1 degree resolution for
readings up to 999.9 degrees. The adjustable 
high/low set points with audible alarm alerts users 
when temperatures exceed the programmed set points. 
It features adjustable emissivity for better accuracy 
on a variety of surfaces. Its built-in laser pointer 
can help identify target areas.
Complete with 9 V battery and pouch case.
For more details please refer datasheet.
 

Dual Laser InfraRed Thermometer - 42512 - EXTECH
Product Overview

The Extech 42512 is a Dual Laser InfraRed Thermometer. 
This thermometer features dual lasers for accurate 
targeting with a fast (0.15 s) response time, 
and it has a backlit dual LCD display. 
Temperature range from -50°C to 1000°C 
(-58°F to 1832°F). 
Complete with pouch case and 9 V battery.
Distance to Target Ratio: 30:1
Emissivity: 0.10 to 1.00, adjustable
Repeatability: ±0.5% or 1.8 °F/1 °C
Targeting: dual laser
For more details please refer datasheet.

High Temperature IR Thermometer - 42545 - EXTECH
Product Overview

The 42545 is a High Temperature IR Thermometer
which measures up to 1832°F (-50 to 1000°C) 
with 50:1 distance to target ratio and laser 
pointer that identifies target area. High 50:1 
distance to target ratio measures smaller surface 
areas at greater distances for safe and accurate readings. 
Large backlit LCD display. Adjustable emissivity. 
Complete with 9V battery and carrying case.
Distance to Target Ratio: 50:1
Emissivity: 0.1 to 1.00, adjustable
Targeting : single laser
For more details please refer datasheet.

Pocket Humidity/Temperature Pen - 44550 - EXTECH
Product Overview

The Extech 44550 is a humidity and temperature meter.
It features a dual LCD for simultaneous display of 
relative humidity and temperature (°C/°F switchable).
This temperature pen measures humidity from 20% RH 
to 90% RH ± 5% RH and temperature from 
-10°C to 50°C ± 1°C (14°F to 122°F ± 2°F). 
It is pocket sized for quick and reliable measurements
at any location. 
The max/min memory functions for display of highest 
and lowest readings for both measurements. 
Complete with pocket clip and one LR44 button battery
For more details please refer datasheet.

Humidity/Temperature Pen - 445580 - EXTECH
Product Overview

Take this this handy humidity and temperature 
gauge on the go and rely on a long-lasting 3V 
lithium battery for maximum usage time.
The slim Extech 445580 humidity/temperature 
pen will capture humidity readings from 
10 to 90% RH and register temperatures from 
-10°C to 50°C (14°F to 122°F). 
This utility tool is ideal for field work, 
storing maximum and minimum readings until 
the memory is cleared and includes a data-hold
button for rapidly fluctuating measurements. 
For more details please refer datasheet.
 

Hygro-Thermometer Clock - 445702 - EXTECH
Product Overview

The Extech 445702 combines 3 displays for time, 
temperature and humidity.
The clock displays both 12 and 24 hour time. 
Includes a maximum/minimum with reset function. 
Humidity measures 10% RH to 85% RH ± 6% RH,
and temperature measures -10°C to 60°C ± 1°C 
(14°F to 140°F ± 1.8°F). 
Complete with built-in tilt stand, wall 
mounting bracket, and AAA battery.
Relative Humidity: 10 to 85%
Relative Humidity Basic Accuracy: ±6%
For more details please refer datasheet.

Big Digit Indoor/Outdoor Hygro-Thermometer - 445713 - EXTECH
Product Overview

The Extech Big Digit Hygro-Thermometer 
simultaneously displays indoor and outdoor 
temperature and humidity. 
It measures humidity from 10% RH to 99% RH 
± 5% RH and temperature from -10°C to 60°C 
± 1°C (14°F to 140°F ± 1.8°F). 
A max/min with reset function stores and 
recalls high and low measurements for 
all 4 parameters. 
Complete with built-in stand, wall mounting 
bracket, outdoor sensor with 89 cm (35 in) 
cable, and 1.5 V AAA battery.
For more details please refer datasheet.

Big Digit Hygro-Thermometer with Remote Probe - 445715 - EXTECH
Product Overview

This Extech Big Digit Hygro-Thermometer has an 
extendable probe with a 45.7 cm (18 in) cable. 
It measures humidity from 10% RH to 99% RH ± 4% RH 
and temperature from -10°C to 60°C ± 1°C 
(14°F to 140°F ± 1.8°F). 
This meter also includes maximum/minimum and rest
functions, as well as having a rear calibration 
adjustment post with optional RH calibration bottles. 
Comes complete with built-in stand, mounting bracket,
sensor, and 1 AAA battery.
Temperature (Air) Basic Accuracy:±1.8°F/1.0°C 
For more details please refer datasheet.

Hygro-Thermometer Humidity Alert with Dew Point - 445814 - EXTECH
Product Overview

The Extech 445814 Humidity Alert Hygro-Thermometer 
has a programmable % RH audible and visual alarm 
that alerts you when humidity exceeds the set limit. 
A large LCD simultaneously displays temperature, 
humidity, and dew point. 
This product measures humidity from 10% RH to 
99% RH ± 4% RH and temperature from -10°C to 60°C 
± 1°C (14°F to 140°F ± 1.8°F). 
Rear calibration pot for humidity and temperature.
Featuring maximum/minimum with reset functions that 
store and recall the highest and lowest readings recorded.
For more details please refer datasheet.

1/4 DIN Temperature PID Controller with 4-20mA Output - 96VFL13 - EXTECH
Product Overview

The Extech 96VFL13 Temperature PID Controller 
offers fuzzy logic enhanced PID and a soft-start
feature which protects heaters from cold-starts. 
PID plus fuzzy logic tackles even the most 
demanding applications, eliminating over-shoot,
unwanted process fluctuations, and drift. 
The soft start feature is ideally suited for
processes such as those employed in the 
thermoplastics industry: where careful, exact, 
and slow heating of different products is required. 
Accepts thermocouple and RTD inputs. 
Also available with 2 relay outputs (96VFL11).
For more details please refer datasheet.

Psychrometer with InfraRed Thermometer - HD500 - EXTECH
Product Overview

The HD500 Psychrometer with Infrared Thermometer 
combines 3 in 1 with humidity meter, type K 
thermometer and infrared thermometer functions. 
The HD500 features a large triple LCD backlit display, 
built in USB port, minimum/maximum, data hold and 
auto power off functions. 
Built-in InfraRed Thermometer for non-contact 
temperature measurement to 932°F (500°C). 
Includes a 3 year warranty, Windows compatible 
software with USB cable, Type K bead wire probe,
carrying case and 9-volt battery.
For more details please refer datasheet.

Mini IR Thermometer with Type-K Input - IR267 - EXTECH
Product Overview

Compact non-contact InfraRed (IR) Thermometer 
measures up to 1112°F (600°C) with built-in laser
pointer to identify target area and improve aim. 
Type K input allows for high temperature measurements
up to 1832°F (1000°C). 
Builtin temperature sensor also measures Air Temperature.
Adjustable emissivity feature allows for a higher accuracy
when measuring temperature on various surfaces.
Distance to Target Ratio: 12:1
Emissivity: 0.05 to 1.00, adjustable
Targeting: single laser
For more details please refer datasheet.
 

IR Thermometer with Color Alert - IR270 - EXTECH
Product Overview

Fast response with high accuracy, the Extech IR270
is ideal for quick checks of multiple spots in a 
process or for catching spikes in temperature. 
Easy programmable High/Low Alarm with tri-color 
display and audible alarm measures non-contact 
temperature up to 1202°F (650°C).
Distance to Target Ratio:12:1
Emissivity: 0.1 to 1.00, adjustable
Targeting: single laser
Temperature (IR) Basic Accuracy: 
-4 to 1202 °F (-20 to 650 °C)
For more details please refer datasheet.

Dual Laser IR Thermometer - IR320 - EXTECH
Product Overview

Rugged design with Waterproof (IP65) and 9.8ft 
(3m) drop-proof protection, Extech IR320 provides 
fast and accurate temperature measurements 
up to 1202°F (650°C). 
Its dual guided laser shows the target area between
the two points at a 12:1 distance to target ratio. 
It has programmable High and Low Alarms with Red 
(HI) and Blue (LOW) visual LED alert. 
The Lock function allows for continuous measurement.
Distance to Target Ratio: 12:1
Emissivity: 0.10 to 1.00, adjustable
Temperature (Air) Max Resolution: 0.1 °F/ °C
For more details please refer datasheet.

Mini IR Thermometer - IR400 - EXTECH
Product Overview

The IR400 is a Compact thermometer capable of 
measurements up to 630°F (332°C) with the 
built-in laser pointer that identifies target 
area and improves aim. 
Backlighting illuminates display for taking 
measurements at night or in areas with low 
background light levels. 
Fixed 0.95 emissivity covers 90% of 
surface applications. 
Complete with 9-Volt battery and case.
Emissivity: 0.95, fixed
Targeting: single laser
For more details please refer datasheet.

Hygro-Thermometer + InfraRed Thermometer - RH101 - EXTECH
Product Overview

This Combination Humidity meter plus 
Infrared Thermometer features a large backlit 
LCD with Primary and Secondary displays. 
Primary display is user selectable for IR or
Humidity; Secondary always displays ambient 
temperature. 
Infrared thermometer has built-in laser pointer
and an 8:1 distance to target ratio. 
Data Hold and MAX, Auto power off. 
Complete with 9V battery and carrying case.
Emissivity: 0.95, fixed
Relative Humidity: 10% to 95%
For more details please refer datasheet.

Type K/J Single Input Thermometer - TM100 - EXTECH
Product Overview

The Extech TM100 Type J/K Single Input Thermometer 
has a wide temperature range of -200°C to 1372°C 
(-328°F to 2501°F) for Type K measurements 
and -210°C to 1100°C (-346°F to 2012°F) for
Type J measurements. 
It has a high 1°C/0.1°F resolution, as well as 
a large backlit LCD display with readouts in 
°C, °F, or Kelvin. 
The data hold function freezes the reading on 
the display and the screen displays the max/min/avg. 
Readings capture a relative time stamp.  
Comes with anuto power off with a disable feature. 
For more details please refer datasheet.

Compact Temperature Indicator - TM20 - EXTECH
Product Overview

The Extech TM20 is a Temperature Indicator
which is compact and waterproof with a 
stainless steel probe. 
It includes 20 mm (0.78 in) stainless steel probe 
with 2.9 m (9.6 ft) cable. 
The TM20 measures temperature from -40°C to 70°C 
(-40°F to 158°F). Complete with foot stand, 
temperature sensor, and a CR2032 3 V button battery.
Audible and visual alarm alerts when temperature
level is higher or lower than the user programmed
High/Low set points
For more details please refer datasheet.

Dual Laser IR Video Thermometer - VIR50 - EXTECH
Product Overview

The Extech VIR50 is a 2200°C (3992°F) Dual Laser
Video IR Thermometer which features a 5.6 cm (2.2 in)
color TFT LCD display and built-in VGA (640 x 480) camera.
It includes a MicroSD card for capturing images (JPEG)
and video (3GP) for viewing on your PC.
Dual lasers indicate the ideal measuring distance
(approximately 127 cm) where the two laser points 
converge to a 2.5 cm (1 in) target spot. 
Comes with microSD card, general-purpose 
Type-K bead wire probe, USB cable, rechargeable 
3.7 V battery, carrying case, and user manual.
For more details please refer datasheet.

Heavy Duty Light Meter with PC Interface - 407026 - EXTECH
Product Overview

This 407026 Heavy Duty Light Meter 
has 4 lighting type settings for enhanced 
accuracy (Tungsten/Daylight, Fluorescent,
Sodium, Mercury). 
Additional features include Data Hold, 
Min/Max/Average, Auto power off and a % reading
of the differential from a reference point. 
Built-in RS-232 interface with optional Data 
Acquisition Software and Data logger. 
Complete with 9V battery, light sensor with 
45" (1.1m) cable, protective cover, and 
holster with stand.
For more details please refer datasheet.

Foot Candle/Lux Light Meter - 401025 - EXTECH
Product Overview

401025 is a Foot Candle/Lux Meter 
which measures light level to 5000FC 
(foot-candles)and 50,000 Lux with a 
5% accuracy using a precision photo 
diode and color correction filter. 
Meter features fast/slow response time 
and an analog output (1mV per count) for 
capturing readings to a recorder. 
Comes complete with 9-Volt battery.
Analog Output: Yes
Cosine and Color Corrected: Yes
Fast Response: 0.2s
For more details please refer datasheet.

Digital Sound Level Meter - 407730 - EXTECH
Product Overview

The 407730 sound level meter measures
from 40 to 130dB with an accuracy of 2dB. 
The digital display offers a 0.1dB resolution 
and features a fast responding analog bar graph.
User can choose A or C weighting. 
Max Hold captures highest reading. 
Includes microphone wind screen and four AAA batteries.
Analog Output: AC
Microphone Condenser, 0.5” (12.7mm)
Response Time: Fast/Slow
Sound Range (dB): 40 to 130dB
For more details please refer datasheet.

Low/High Range Sound Level Meter - 407732 - EXTECH
Product Overview

This type 2 sound level meter meets ANSI 
and IEC 651 Type 2 standards. 
Ideal for noise surveys in the workplace, 
installing fire alarms and speaker systems 
and enforcing noise ordinances. 
Measures from 35 to 130dB in 2-ranges with 
accuracy of plus or minus 1.5dB. 
Data hold and Max hold functions. 
Backlit display allows use in dimly lit areas. 
Complete with microphone wind screen and 9V battery.
For more details please refer datasheet.

Sound Level Meter with PC Interface - 407750 - EXTECH
Product Overview

The 407750 Sound Level Meter with PC Interface
has a large backlit display, PC Interface and 
background sound absorber for noise measurements
with high ambient noise levels. 
It features A/C Weighting, fast/slow response time,
Min/Max, and analog AC/DC outputs for connection 
to a recorder. 
Complete with microphone wind screen,9V battery and case.
Sound Range (dB): 30 to 130dB
Sound Range (dB)Basic Accuracy: ±1.5dB (Type 2)
Sound Range (dB) Max Resolution: 0.1dB
For more details please refer datasheet.

Integrating Sound Level Meter with USB - 407780A - EXTECH
Product Overview

The 407780A is an integrating sound level meter 
with USB. 
The meter takes Leq and SEL measurements with 
A and C frequency weighting options. 
The meter has a built in datalogger that 
records up to 32,000 records and PC interface 
to easily access your logged information.
Its 4 digit multifunction LCD has an analog 
bargraph and digital reading. 
With the 407780A you can program integration times,
utilize impulse, fast or slow response settings and
benefit from alarm features.
For more details please refer datasheet.

Real Time Octave Band Analyzer - 407790A - EXTECH
Product Overview

Extech’s Type 2 Integrating Sound Level Meter 
with Octave and 1/3 Octave Band Real Time is 
displayed on a large 3.5" 320x240 TFT color
backlit LCD.
Frequency Bandwidth: 25Hz ~ 10kHz
Memory: microSD card (included)
Microphone: Condenser,0.52" (13.2mm)
Response Time: Fast, Slow, 10ms (t), I
Sound Range (dB): 20 to 90dB, 20 to 100dB,
20 to 110dB, and 30 to 120dB, 40 to 130dB
Sound Range: Basic Accuracy    ±1.5dB (ref 94dB @ 1kHz)
For more details please refer datasheet.
 

4-in-1 Environmental Meter - 45170 - EXTECH
Product Overview

This 4-in-1 meter measures Humidity, Temperature,
Air Velocity and Light. 
The dual LCD simultaneously displays Temperature 
and Air Velocity or Relative Humidity. 
High Temperature air or surface measurements can 
be made using the built-in Type K input. 
Comes complete with built-in Humidity sensor, 
Light sensor and Vane wheel, 
wrist strap, and 9-Volt battery.
Air Velocity (ft/min): 80 to 5910 ft/min
Air Velocity (ft/min) Basic Accuracy: ±3%
Air Velocity (ft/min) Max Resolution: 10ft/min
For more details please refer datasheet.
 

Triple Axis EMF Tester - 480826 - EXTECH
Product Overview

480826 Triple Axis EMF Tester is designed 
to provide a quick, reliable and easy way
to measure electromagnetic field radiation 
levels around power lines, electrical appliances
and industrial devices. 
Provides Three axis (X, Y, Z direction) 
electromagnetic field measurement. 
Calibrated to measure EMF radiation at wide 
bandwidths from 30 Hz to 300 Hz. 
Complete with sensor with 3 ft. 
(930 mm) cable, 9V battery, and hard carrying case.
For more details please refer datasheet.

RF EMF Strength Meter - 480836 - EXTECH
Product Overview

This RF EMF Strength Meter monitors high frequency
radiation in the 50MHz to 3.5GHz range.
Ideal for mobile phones, cell phones, base stations,
locating RF hotspots, wireless network (Wi-Fi) 
RF detection, RF"Electrosmog" detection, and 
microwave leakage. 
It features non-directional measurement with
3-channel (triaxial) measurement probe, 
Max Hold and Average functions, and manual 
store/recall of up to 99 data sets. 
In addition, there is an audible alarm with a 
user-selectable threshold. 
For more details please refer datasheet.
 

8GHz RF Electromagnetic Field Strength Meter - 480846 - EXTECH
Product Overview

The Extech 480846 RF EMF Strength Meter
monitors high frequency radiation in the 
10 MHz to 8 GHz range. 
Ideal for mobile phones, cell phones, 
base stations, locating RF hotspots, 
wireless network (Wi-Fi) RF detection, 
RF "electrosmog" detection, microwave leakage, 
and wireless communication applications 
(CW, TDMA, GSM, DECT). 
This meter features non-directional measurement
with a 3-channel (triaxial) measurement probe,
max hold and average functions, and manual 
store/recall of up to 99 data sets. 
For more details please refer datasheet.
 

CFM/CMM Mini Thermo-Anemometer - AN100 - EXTECH
Product Overview

The AN100 CFM/CMM Thermo-Anemometer can simultaneously 
display Air Flow or Air Velocity plus Ambient Temperature. 
Easy to set area dimensions (ft² or m²) are stored in the
meter's internal memory for the next power on. 
Additional features include: 20 point average for Air Flow
and 3% velocity accuracy via low friction 2.83 in. 
D (72mm) ball bearing vane wheel on 3.9ft (120cm) cable. 
Comes complete with 9V battery, protective rubber 
holster and case.
Air Velocity (ft/min) Basic Accuracy: ±3% ft/min
Air Velocity (ft/min) Max Resolution: 1 ft/min
Air Velocity (km/h): 1.4 to 108.0 km/h
Air Velocity (km/h) Basic Accuracy: ±3% km/h
For more details please refer datasheet.
 

CFM/CMM Mini Thermo-Anemometer - AN200 - EXTECH
Product Overview

AN200 is a CFM/CMM Mini Thermo-Anemometer 
with built-in InfraRed Thermometer. 
Built-in non-contact IR Thermometer measures 
remote surface temperatures to 500°F (260°C)
with 8:1 distance to spot ratio and Laser Pointer.
This CFM/CMM Thermo-Anemometer can simultaneously
display of Air Flow or Air Velocity plus 
Ambient Temperature. 
Additional features include: 20 point average for 
Air Flow and 3% velocity accuracy via low friction
2.83 in.D (72mm) ball bearing vane wheel on 
3.9ft (120cm) cable. 
For more details please refer datasheet.
 

Large Vane CFM/CMM Thermo-Anemometer - AN 300 - EXTECH
Product Overview

The AN300 is a Large Vane CFM/CMM Thermo-Anemometer. 
This meter measures Air Velocity, 
Air Flow and Temperature. 
Extech’s Large Vane Thermo-Anemometer series 
allows for more precise readings on larger
size ducts. 
Each meter simultaneously displays Airflow
or Air Velocity and Temperature. 
Complete with 4 AAA batteries 
and hard carrying case.
Air Velocity (ft/min): 40 to 5900ft/min
Air Velocity (ft/min) Basic Accuracy: ±1.5%
Air Velocity (m/s): 0.2 to 30m/s
For more details please refer datasheet.
 

Large Vane CFM/CMM Anemometer/Psychrometer - AN 310 - EXTECH
Product Overview

The AN310 is a Large Vane CFM/CMM Anemo/Psychrometer.
This meter measures Air Velocity, Air Flow, 
Relative Humidity, Wet Bulb and Dew Point. 
Extech’s Large Vane Thermo-Anemometer series 
allows for more precise readings on larger 
size ducts. 
With Min/Max, Data Hold, and Auto
power off functions. 
Air Velocity (ft/min): 40 to 5900ft/min
Air Velocity (ft/min) Basic Accuracy: ±1.5%
Air Velocity (m/s): 0.2 to 30m/s
Air Velocity (m/s) Basic Accuracy:±1.5%
For more details please refer datasheet.

CMM/CFM Anemometer/Psychrometer Datalogger - AN340 - EXTECH
Product Overview

The AN340 is a CMM/CFM Anemo/Psychrometer Data logger. 
This meter measures Air Velocity/Volume, Temperature, 
Humidity, Wet Bulb, and Dew Point. 
User can store up to 12,000 readings for data analysis. 
Manually store/recall up to 99 reading. 
Complete with external mini vane probe,
Windows compatible software, USB cable, 
6 AAA batteries, and hard carrying case.
Air Velocity (ft/min): 100 to 3940ft/min
Air Velocity (ft/min) Basic Accuracy:±3%
Air Velocity (m/s): 0.5 to 20m/s
Air Velocity (m/s) Basic Accuracy: ±3%
For more details please refer datasheet.
 

LED Light Meter - LT40 - EXTECH
Product Overview

The Extech LT40 LED light meter is useful
for measuring and optimizing environmental light
levels in a wide range of environments, 
including office buildings, manufacturing plants 
and warehouses, university campuses, schools, 
hospitals, and many other locations. 
As OSHA regulates workplace lighting, light meters
such at the LT40 can verify regulatory compliance, 
as well as state and local public safety codes 
and ordinances. 
The LT40 can also measure standard light sources
such as fluorescent,metal halide...etc
For more details please refer datasheet.
 

Light Meter - LT300 - EXTECH
Product Overview

Insufficient lighting can create security risks 
or result in OSHA crackdowns.
The Extech LT300 light meter can determine whether
you have adequate illumination to protect workers,
students, visitors, patients or attendees 
of different venues.
This handheld instrument measures up to 40,000 Fc 
(or 400,000 Lux) utilizing a remote light sensor
connected via 12 in. 
coiled cable (expandable to 24 in.). 
A prominent LCD readout displays a digital calculation
and complementary analog bar graph for quick, 
reliable assessments.
For more details please refer datasheet.

Datalogging Heavy Duty Light Meter - HD450 - EXTECH
Product Overview

The HD450 Light Meter measures from 0 to 40,000Fc
and 0 to 400kLux with a 0.01Fc/0.1Lux resolution. 
Features: 5% accuracy, Peak mode (10µs), Relative mode, 
Min/Max, Data Hold, backlit LCD display with 40-segment
bar graph, and a rugged double molded housing. 
In addition, the datalogger function can automatically 
store up to 16,000 readings or manually store/recall 
up to 99 readings. 
Comes complete with light sensor with 3ft (1m) 
cable and protective cover, software with USB cable, 
hard carrying case and 9V battery.
For more details please refer datasheet.

EasyView™ Light Meter with Memory - EA33 - EXTECH
Product Overview

This compact and ruggedly designed meter 
has a wide measurement range to 99,990 
Foot Candles in 5 ranges and 999,990 Lux 
in 5 ranges with 0.001Fc/0.01Lux resolution. 
Features include: Store and Recall up to 
50 measurements with relative or real time
clock stamp, Luminous intensity (candela) 
calculation, a ripple function that excludes 
stray light from the primary light source measurement,
Multi-point average function, Timed Hold, 
Relative measurement in absolute value or % deviation, 
Comparator function with high/low alarms, 
and Auto Power Off with disable. 
For more details please refer datasheet.

EasyView™ Wide Range Light Meter - EA30 - EXTECH
Product Overview

The EA30 Light meter sports a compact and rugged
design and features a large display. 
Multiple wide measuring ranges: 40,000Fc in 4 ranges
and 400,000Lux in 5. 
Data hold freezes reading on display MIN/MAX readings.
Zero function Cosine and color corrected measurements.
Low battery and overrange indication. 
Auto power off to save battery life. 
Meter utilizes precision silicon photodiode sensor 
with 3ft coiled cable for easy storage. 
Complete with built-in stand, remote sensor with 
protective cover, protective rubber holster.
For more details please refer datasheet.
 

Laser Distance Meter - DT100M - EXTECH
Product Overview

Extech’s DT100M measures distance up to 330ft (100m).
It can calculate area and volume and the integrated 
Pythagorean Theorem allows the user to take indirect
measurements. 
Other features include continuous measurement
with Min/Max distance tracking, 20 point memory, 
addition/subtraction of sequential readings, 
front or rear edge reference, and a Stakeout function. 
Large quad backlit LCD display and double molded 
housing. 
It also has a handy built-in bubble level 
and comes with a wrist strap and batteries. 
For more details please refer datasheet.

Laser Distance Meter - DT40M - EXTECH
Product Overview

Extech’s DT40M measures distance up to 40 m 
(131 ft).

It can calculate area and volume and the 
integrated Pythagorean theorem allows the
user to take indirect measurements. 
Other features include continuous measurement 
with min/max distance tracking, 20 point memory,
addition/subtraction of sequential readings,front 
or rear edge reference, and a stakeout function. 
Large quad backlit LCD display and double 
molded housing.
It also has a handy built-in bubble level 
and comes with a wrist strap and batteries.
For more details please refer datasheet.

Laser Distance Meter - DT60M - EXTECH
Product Overview

Extech’s DT60M measures distance up to 196ft (60m).
It can calculate area and volume and the integrated
Pythagorean Theorem allows the user to take indirect
measurements.
Other features include continuous measurement 
with Min/Max distance tracking, 20 point memory, 
addition/subtraction of sequential readings, 
front or rear edge reference, and a Stakeout function. 
Large quad backlit LCD display and double molded housing. 
It also has a handy built-in bubble level and comes
with a wrist strap and batteries.
For more details please refer datasheet.
 

Pocket UV-AB Light Meter - UV505 - EXTECH
Product Overview

The Extech UV505 Pocket Light Meter 
measures UV-AB light from natural 
and artificial light sources. 
It can be used in outdoor activities,
indoor medical testing, laboratory and research, 
industrial, education, electronics, and forensics
/criminology applications. 
It offers a backlit display, cosine corrected sensor,
two selectable ranges, zero function, display hold,
and auto power off.
Includes a pouch to protect and store your meter.
For more details please refer datasheet.
 

Pocket Solar Power Meter - SP505 - EXTECH
Product Overview

Extech’s SP505 measures solar power level 
from sunlight outdoors to determine the 
best location of solar panel and solar
water heater installations. 
It is also used indoors by window manufacturers,
the automotive industry, and remodeling home 
owners to check the level of solar radiation
transmission through various glass thicknesses 
and degrees of tinting to use for window 
installations. The convenient, pocket-sized 
meter with a built-in precision solar light 
sensor is easy-to-use wherever you go.
For more details please refer datasheet.
 

Color LED Light Meter - LT45 - EXTECH
Product Overview

The LT45 LED light meter is useful for measuring 
and optimizing environmental light levels in a 
wide range of environments, including office 
buildings, manufacturing plants and warehouses,
university campuses, schools, hospitals, 
and many other locations. 
OSHA regulates workplace lighting because
illumination must be adequate for assigned tasks, 
light meters are used to verify regulatory compliance, 
as well as state and local public safety codes and 
ordinances. 
For more details please refer datasheet.

Digital Brix Refractometer - RF153 - EXTECH
Product Overview

The Extech RF153 can be used to take quick 
and accurate % Brix or Refractive Index (RI)
measurements of dissolved sucrose level in 
liquids for beverage and food production, 
determine maturity of fruits and plants, 
or control the concentration of industrial 
fluids (such as cutting coolants, hydraulic fluids,
and antifreeze) to extend equipment life and prevent
corrosion. 
With a fast three second response time, 
the LCD displays % Brix or RI and temperature. 
The RF153 fits in the palm of your hand 
and it features built-in ATC, single zero calibration,
prism cover, and auto memory storing 10 readings.
For more details please refer datasheet.

Portable Sucrose Brix Refractometer (0 to 10%) with ATC - RF11 - EXTECH
Product Overview

The Extech RF153 can be used to take quick 
and accurate % Brix or Refractive Index (RI)
measurements of dissolved sucrose level in 
liquids for beverage and food production, 
determine maturity of fruits and plants, 
or control the concentration of industrial 
fluids (such as cutting coolants, hydraulic fluids,
and antifreeze) to extend equipment life and prevent
corrosion. 
The RF153 fits in the palm of your hand 
and it features built-in ATC, single zero calibration,
prism cover, and auto memory storing 10 readings.
For more details please refer datasheet.

Portable Salinity Refractometer (0 to 100ppt) with ATC - RF20 - EXTECH
Product Overview

The Extech RF20 measures the concentration 
of dissolved salt in fluids. 
It has a compact size and is easy to operate. 
Automatic Temperature Compensation (ATC) 
from 10°C to 30°C.
Comes with case, calibration screwdriver,
plastic pipette calibration solution, 
and user guide.
Salinity: 0 to 100ppt (10 to 30°C ATC)
Salinity Basic Accuracy: ±0.1%
Salinity Max Resolution: 1ppt
For more details please refer datasheet.

Vibration Meter - VB450 - EXTECH
Product Overview

The VB450 is a compact sized Vibration Meter 
which measures vibration levels in industrial machinery.
Misalignment, poor balancing, structural compromises,
and other factors can cause unwanted vibration increases.
VB450 features a wide 10Hz to 1500Hz frequency range
and provides Displacement, Velocity, 
and Acceleration measurement. Complete 
with remote sensor, magnetic mount, 
9V battery, wrist strap, and soft case.
Acceleration: 0.1 to 199.9 m/s²
Acceleration Basic Accuracy: ±(5% of reading + 1digit)
Acceleration Max Resolution: 0.1m/s²
For more details please refer datasheet.
 

Heavy Duty Vibration Meter - 407860 - EXTECH
Product Overview

407860 Heavy Duty Vibration Meter 
has a Velocity range of 7.87 in./s or 200 mm/s; 
Acceleration range of 656 ft./s or 200 m/s, 
and Displacement range of 0.078 in. or 2 mm. 
It features a basic accuracy of 5%, a remote 
vibration sensor (magnetic or stud mounted) 
with a 39 in. 
(1 m) cable, RMS, Peak Value measurement modes, 
and auto/manual store with recall of up to 500 readings.
The captured readings can be downloaded to your
PC for further analysis using the optional Windows
compatible data logging software.
For more details please refer datasheet.

Pen Vibration Meter - VB400 - EXTECH
Product Overview

The Extech VB400 Pen Vibration Meter 
is designed to provide easy and accurate
velocity and acceleration measurements on 
industrial machinery. 
Its measures RMS Acceleration and Velocity 
with metric and imperial units of measure. 
The VB400 has a wide frequency range from 
10 Hz to 1 kHz and basic accuracy of 
± (5% + 2 digits). 
Additional features include zero adjustment, 
data hold, and a low battery indicator. 
Water and dust resistant to IP65. 
For more details please refer datasheet.
 

Vibration Monitoring Solution - SV87-KIT - EXTECH
Product Overview

Vibration trending and analysis can help 
detect serious problems with industrial 
machines long before the damage can be seen. 
That’s why the FLIR SV87-KIT Vibration 
Monitoring Solution is essential for 
manufacturing processes that use rotating 
machinery, industrial pumps, fans, gearboxes,
and motors.
The included remote monitoring gateway 
stores sensor data and wirelessly transmits
readings in real time to a mobile device or PC. 
For more details please refer datasheet.

Pressure Meter/Datalogger - SDL700 - EXTECH
Product Overview

The Extech SDL700 is a Pressure Meter/Data Logger 
that displays 10 types of pressure on its large 
backlit dual LCD display. 
This meter records data on an SD card in Excel 
format for future reference and analysis. 
This meter is complete with a 3 year warranty, 
6 x AA batteries, SD card, and hard carrying case.
Pressure (atmosphere): 0.002 to 1.974 (30psi transducer), 
0.01 to 9.87 (150psi transducer), 0.02 to 19.74atm
(300psi transducer). Pressure (bar)    0.002 to 
2 (30psi transducer), 0.01 to 10 (150psi transducer),
0.02 to 20bar (300psi transducer).
For more details please refer datasheet.

Heavy Duty Differential Pressure Manometer (29psi) - 407910 - EXTECH
Product Overview

The 407910 is a Differential Pressure Manometer 
that measures to 29psi and displays results in 
8 units of measure. 
Features include: zero function for offset 
measurements, Min/Max, Data Hold and Auto power off. 
Includes 2 quick-disconnect fittings, 9V battery, 
protective holster with stand, and case.
Pressure (atmosphere): ±1.974atm
Pressure (atmosphere) Basic Accuracy: ±1% full scale
Pressure (atmosphere) Max Resolution: 0.001atm
Pressure (inH?O): ±802.0inH₂O
Pressure (inH?O) Basic Accuracy: ±1% full scale
For more details please refer datasheet.
 

Pitot Tube Anemometer + Differential Manometer - HD350 - EXTECH
Product Overview

The HD350 is a differential manometer & Pitot tube anemometer.
Measures Differential pressure in 5 selectable units
of measure and includes a Pitot tube and 2 connection
hoses for measuring Air Velocity/Air Flow. 
Additional features include data hold, auto power off,
zero function, plus manually record/recall up to 99 readings.
Built-in USB port.
Simultaneous display of Pressure, Air Flow plus Temperature
±0.7252psi range
5 selectable units of pressure measurement
Complete with software and USB cable, 9V battery,
pitot tube with two 33.5 in. (85 cm) connection hoses 
and hard carrying case.
For more details please refer datasheet.

Differential Pressure Manometer (2psi) - HD700 - EXTECH
Product Overview

Offering 11 selectable units of measure,
the HD700 Differential Pressure Manometer 
can serve as a low range/high resolution Gauge 
or provide Differential Pressure up to 0 
to 55.40 in. 
H2O (inches of water). 
Max/Min recording and Relative time stamp
are useful features, as are HD700's Data Hold
and Auto Power Off functions.
The 2psi HD700 also features Zero function for 
offset correction or measurement 
and a built-in USB interface. 
For more details please refer datasheet.

Differential Pressure Manometer (5psi) - HD750 - EXTECH
Product Overview

Offering 11 selectable units of measure,
the HD750 Differential Pressure Manometer 
can serve as a low range/high resolution Gauge
or provide Differential Pressure up to 0 to 138.3 in.
H2O (inches of water). Max/Min recording and Relative
time stamp are useful features, as are HD750's 
Data Hold and Auto Power Off functions.
The 5psi HD750 also features Zero function for 
offset correction or measurement and a built-in 
USB interface. 
Comes complete with 9V battery, 
software with USB cable, AC Adaptor, connection hose, 
built-in stand, and hard carrying case.
For more details please refer datasheet.
 

Differential Pressure Manometer (0.5psi) - HD755 - EXTECH
Product Overview

Offering 11 selectable units of measure,
the HD755 Differential Pressure Manometer 
can serve as a low range/high resolution
Gauge or provide Differential Pressure 
up to 0 to 13.85 in.
H2O (inches of water). 
Max/Min recording and Relative time stamp 
are useful features, as are HD755's Data Hold 
and Auto Power Off functions. 
The 0.5psi HD755 also features Zero function 
for offset correction or measurement and 
a built-in USB interface. 
For more details please refer datasheet.

Coating Thickness Tester - CG204 - EXTECH
Product Overview

The Extech CG204 is a portable meter 
designed for non-invasive coating thickness
measurements with automatic recognition of 
ferrous and non-ferrous substrates. 
The tester uses dual technology to indicate ferrous
(magnetic induction measurement) and non-ferrous 
(eddy current measurement) substrates. 
It features single and continuous measurement 
modes as well as direct and group working modes,
400-reading memory storage, and user-programmable
high/low alarms. 
The CG204 comes with two AAA batteries.
For more details please refer datasheet.

Coating Thickness Tester with Bluetooth® - CG304 - EXTECH
Product Overview

The Extech CG304 Coating Thickness Tester 
offers a non-destructive way of measuring 
the thickness of ferrous and non-ferrous 
substrates with automatic recognition of the 
material being measured. 
Memory stores 2500 readings. 
The unique Bluetooth interface feature wirelessly 
transmits data to your PC for further analysis 
and enables you to generate a documented report.
Special LCD with backlight feature and contrast
for easy viewing in various lighting conditions. 
Complete with two AAA batteries, software.
For more details please refer datasheet.

Digital Ultrasonic Thickness Gauge - TKG100 - EXTECH
Product Overview

The Extech TKG100 offers Thickness Gauges 
designed in compact, handheld, rugged housing 
ideal for field use. 
The ultrasonic technology allows for non-destructive
thickness measurements for primarily steel structures.
It includes multiple transducer options for high 
temperature and difficult to measure materials. 
Complete with 2oz bottle of coolant, 2 AA batteries,
5 MHz Transducer, and hard carrying case.
Material Velocity Calibration: 0.200 to 0.7362 in/µS 
Steel Thickness : 5MHz probe: 0.040 to 20" (1.0 to 508mm); 
10MHz probe: 0.030" to 2" (0.76mm to 50.8mm)
For more details please refer datasheet.

Digital Ultrasonic Thickness Gauge/Datalogger - TKG150 - EXTECH
Product Overview

The Extech TKG150 is a Thickness Gauge/Data logger. 
The compact, rugged meter allows for non-destructive
thickness measurements. 
It offers thickness gauges designed in compact, handheld,
rugged housing which is ideal for field use. 
The ultrasonic technology allows for non-destructive 
thickness measurements for primarily steel structures. 
Complete with protective holster, 2 oz bottle of coolant,
2 AA batteries, 5 MHz transducer, hard carrying case,
USB cable, and exporter software.
Alarm: Audible beeping; illuminae flashing display
and keypad; and vibration feedback
For more details please refer datasheet.
 

Digital Ultrasonic Thickness Gauge / Datalogger with Color Waveform - TKG250 - EXTECH
Product Overview

The Extech TKG250 is a Digital Ultrasonic Thickness Gauge
/Data logger with Color Waveform function. 
It offers thickness gauges designed in compact, handheld,
rugged housing which is ideal for field use. 
The ultrasonic technology allows for non-destructive 
thickness measurements for primarily steel structures.
It data logs up to 100 K readings and can be exported 
to Excel® for further analysis.
Complete with protective holster, 2 oz bottle of coolant,
2 AA batteries, 5 MHz transducer, hard carrying case, 
USB cable, and exporter software.
For more details please refer datasheet.

Coating Thickness Tester - CG206 - EXTECH
Product Overview

Dual technology provides automatic recognition
for ferrous and non-ferrous substrates without
having you guess the material. 
Allows for quick, one-handed operation,
non- destructive measurement of the coating 
thickness on various surfaces.
Coating Thickness (Ferrous):
0 to 1350µm (0 to 53mils)
Basic Accuracy    ±2.5%
Max Resolution    0.1µm (0.004mils)
Coating Thickness (Non-Ferrous):
0 to 1350µm (0 to 53mils)
Basic Accuracy: ±2.5%
For more details please refer datasheet.

Coating Thickness Tester - CG104 - EXTECH
Product Overview

The CG104 is a pocket-sized coating thickness tester
which offers quick one-handed operation and 
non-destructive measurements of the thickness 
of ferrous and non-ferrous substrates. 
Its unique reversible display allows you to take 
readings in challenging angles of area being
measured, plus it has an easy-to use menu system 
and backlit display feature. 
Built-in memory stores/recalls up to 255 readings. 
Complete with two AAA batteries, calibration standards
(one ferrous plate, one non-ferrous plate and one standard
coating plate film), wrist strap and soft case.
For more details please refer datasheet.

Quantitative Optical Gas Imaging System for GF620/GFx320/GF320 - QL320 - EXTECH
Product Overview

The QL320 is a quantitative optical gas imaging system
(QOGI) that allows surveyors to measure the leak rates
for methane and other hydrocarbons. 
This eliminates the need for secondary sampling 
with a toxic vapor analyzer or similar tool.
In addition, the QL320 does not require close contact
with the gas in order to measure emission rates, 
making it a safer solution for quantifying 
difficult-to-measure gas leaks.
Safe Solution for Quantifying Gas Leaks
For more details please refer datasheet.
 

Mini Thermo-Anemometer - 45118 - EXTECH
Product Overview

The 45118 is a Waterproof pocket sized 
Thermo-Anemometer for Air Velocity, 
Temperature and Wind-chill measurements.
Simultaneously display Air Velocity 
and Temperatureor Wind-chill on the LCD screen. 
Selectable averaging function of 5, 10, 
or 13 second intervals.
Fold up protective housing extends to 9 in.
(229mm) for a better reach. 
Tripod mountable.
Features Data Hold with Auto power off functions. 
Complete with battery and 43 in. lanyard.
For more details please refer datasheet.
 

Mini Thermo-Anemometer with Built-in Compass - 45168CP - EXTECH
Product Overview

The Extech 45168CP is a Mini Thermo-Anemometer 
which measures windspeed in ft/min, MPH,m/s,km/h,
knots and in beaufort force with 10 second 
averaging function. 
Additional measurements include temperature, 
relative humidity, dew point, wet bulb, and windchill. 
The built-in compass provides wind direction and 360° 
readings, plus it has an easy-to-use calibration procedure
for improved accuracy. 
Featuring a replaceable, non-corrosive, plastic wind vane 
(impeller) and a tripod mount for hands free use.
Complete with a CR2032 battery and a lanyard.
For more details please refer datasheet.

Refrigerant Leak Detector - RD300 - EXTECH
Product Overview

The Extech RD300 Refrigerant Leak Detector 
detects leakages from air-conditioning units
and cooling systems. 
It is easy to use and ideal for detecting leaks 
from air-conditioning units and cooling systems 
that use all standard refrigerants. 
The multi-colored LED light bar indicates the 
level of leaking refrigerant detected by the RD300. 
The built-in, bright LED convenience light located 
at the sensor tip illuminates dimly lit inspection areas.
Complete with leak test bottle, 9 V battery, 
and protective hard carrying case.
For more details please refer datasheet.

Combustible Gas Leak Detector - FG100 - EXTECH
Product Overview

The FG100 is a Combustible Gas Leak Detector. 
Detects combustible gases Liquefied Natural Gas
(LNG) and Liquefied Propane Gas (LPG) from 500 
to 6500 PPM. Audible and visual alarms. 
Convenient compact portable size with pocket clip. 
Continuous operation up to 4 hours. 
Highly sensitive detection circuitry
For fast detection of gas leaks
LED indicators for gas leakage and static absorption. 
Easy one switch operation. 
Complete with 2 AAA batteries.
For more details please refer datasheet.

EzFlex™ Combustible Gas Detector - EZ40 - EXTECH
Product Overview

The Extech EZ40 EzFlex Combustible Gas Detector
has a 16 inch gooseneck for easy access into hard 
to reach locations.
Detector has a high sensitivity and a one hand
operation with thumb controlled sensitivity 
adjustments to eliminate the background gas levels. 
It has a visible and audible alarm at 10% 
(LEL) lower explosive limited for methane. 
This gas detector will help you locate 
the smallest leaks. 
Complete with 3 C batteries.
For more details please refer datasheet.

Heat Stress WBGT (Wet Bulb Globe Temperature) Meter - HT200 - EXTECH
Product Overview

The HT200 is a Heat Stress WGBT Meter 
which enables accurate measurements for
Wet Bulb Globe Temperature (WGBT), 
Black Globe Temperature (TG), Humidity (%RH),
Air Temperature (TA), Wet Bulb (WT) and 
Dew Point (DEW).
Heat Stress Index measures how hot it feels
when humidity is combined with temperature,
air movement and radiant heat. 
Stores up to 50 readings. 
Comes with 9V battery and carrying case.
For more details please refer datasheet.

Heat Stress WBGT Meter - HT30 - EXTECH
Product Overview

The HT30 Wet Bulb Globe Temperature (WBGT) meter 
allows you to measure Heat Stress Index, 
or how hot it feels when humidity is combined 
with temperature, air movement, and radiant heat. 
The meter can also take individual temperature, humidity, 
and radiant heat measurements as well as monitor
the effects of direct solar radiation on an exposed 
surface using the Black Globe temperature sensor. 
An in/out function displays the WGBT value with 
or without direct sun exposure.
Additional features include Auto Power Off 
with override and a built-in RS-232 interface. 
Complete with 2 AAA batteries.
For more details please refer datasheet.

Heat Index Psychrometer - RH25 - FLIR
Product Overview

The Extech RH25 Heat Index Psychrometer pen 
easily monitors heat index during hot, 
humid days in helps to prevent heat stroke 
during outdoor activities or sporting events.
Dew Point: -108.4 to 122 °F (-78 to 50 °C)
Dew Point Max Resolution: 0.1 °F/ °C
Heat Index: -50.8 to 401 °F (-46 to 205 °C)
Heat Index Max Resolution: 0.1 °F/ °C
Relative Humidity: 0 to 99.9%
Relative Humidity Basic Accuracy: ±3%
Its pocket-sized design makes it convenient 
to carry it wherever you go. 
For more details please refer datasheet.

Optical Gas Imaging (OGI) Cameras for Hydrocarbons - G-Series - FLIR
Product Overview

The FLIR Gx320, G620, and Gx620 are innovative 
Optical Gas Imaging (OGI) cameras designed to
detect hydrocarbons, methane (CH₄), and other 
Volatile Organic Compound (VOC) emissions from
multiple stages of the oil and gas supply chain,
as well as other industrial markets. 
With up to 640 × 480 (307,200 pixels) thermal
resolution,FLIR G-Series cameras have innovative 
gas quantification analytics that measure leak type 
and severity inside the camera, eliminating the 
need for a secondary device.
For more details please refer datasheet.
 

Optical Gas Imaging (OGI) Camera for Sulfur Hexafluoride (SF?) - G306 - FLIR
Product Overview

The FLIR G306 is an innovative Optical Gas Imaging 
(OGI) camera used to visualize sulfur hexafluoride 
(SF₆), ammonia (NH), ethylene (C₂H₄), and other 
industrial gas leaks in various environments. 
SF₆ is a potent greenhouse gas with a global 
warming potential that’s more than 23,000 times
greater than C0₂ over a 100-year period. 
SF₆ is commonly used within the electric power 
industry as an insulator and quenching medium
for gas-insulated substations and circuit breakers. 
For more details please refer datasheet.

Automated Methane Monitoring Solution with Optical Gas Imaging - ADGiLE™ - FLIR
Product Overview

Product

Data Sheet
Not Found

The FLIR ADGiLE™ system is an advanced methane detection
solution designed to provide continuous and autonomous 
monitoring of gas leaks.
Integrating over a decade of FLIR’s advanced Optical
Gas Imaging (OGI) technology, ADGiLE enables operators
to quickly identify and address methane emissions.
This system significantly reduces the need for 
manual inspections, offering real-time alerts
and visual insights that help users act swiftly
to prevent hazards and maintain operational
efficiency. 
For more details please refer datasheet.

High-Performance Videoscope Kits - HDV700-Series - FLIR
Product Overview

The Extech HDV700 is a versatile and lightweight 
professional videoscope that is designed for 
inspections in locations that are difficult or 
unsafe to access. 
With one or more of the eight waterproof (IP67) 
camera probes*, you can use the HDV700 for condition 
monitoring in manufacturing, HVAC/R, plumbing, building,
and automotive applications. 
A range of small diameter and articulating camera probes
are available to give you clear visibility of components
from the 5-inch color touchscreen display. 
For more details please refer datasheet.

High-Performance Videoscope - VS80 Kits - FLIR
Product Overview

The FLIR VS80 is a versatile, professional videoscope
that you can rely on when inspecting locations that 
are difficult or unsafe to access.
Seven unique compatible probes* with waterproof (IP67)
camera tips are available to give you flexibility for
virtually any type of inspection. 
Options include: a 160 × 120 thermal camera, 2-way and 
4-way articulating visual camera, 25 m plumbing spool, 
HD camera, and dual HD camera probe. 
With one or more of the VS80 videoscope probes, you can
perform a wide range of inspections, including industrial
equipment maintenance,building, and automotive applications. 
For more details please refer datasheet.

Thermal Videoscope Kits with Specialty Probe Options - VS290™ - FLIR
Product Overview

The FLIR VS290 is an industrial thermal and visual 
videoscope system designed to help professionals 
quickly and safely find hidden faults and dangers 
in difficult-to-access locations.
Featuring a 160 × 120 true thermal imager and FLIR MSX®
(VSC-IR32 and VSC-IR33 probes), VS290 videoscopes give 
users the power to see and measure invisible hot spots 
before catastrophic equipment failures can occur. 
The small, sleek tips allow for easy inspection through
tight or confined openings, improving productivity
and reducing diagnostic time. 
The 1-meter forward-viewing probe is a practical fit for
general purpose equipment and building thermal scans 
For more details please refer datasheet.

Wireless Handset with Articulating Probe (2m) - HDV-WTX2L - EXTECH
Product Overview

The Extech HDV-WTX2L is a Wireless Handset
with Articulating Probe with a long focus 
range and two meter probe. 
The HDV-WTX2L features wireless transmission 
to Extech's HDV600 Videoscope. 
It features a six month warranty.
For more details please refer datasheet.
 

2-Way Articulating Wireless Video Borescope - BR450W-A2 - EXTECH
Product Overview

The BR450W-A2 2-way articulating wireless video borescope
helps you dive deep into the hidden areas of buildings, 
vehicles, and machinery with ease. 
Its 1280 × 720 HD resolution and dual-view 5.5 mm camera
on a 1.5 m probe allow you to easily capture sharp 
images and videos through the ExView app on your 
smart device.
With its rugged, lightweight housing and IP67 rating,
the BR450W-A2 is essential for thorough examinations
and diagnostics in HVAC, automotive and plant
maintenance inspections.
For more details please refer datasheet.

Dual HD Wireless Video Borescope - BR450W-D - EXTECH
Product Overview

The BR450W-D dual HD wireless video borescope 
is designed to help you inspect and diagnose 
with clarity and precision. 
Its 1280 × 720 HD resolution and dual-view 5.5 mm 
camera on a 1.5 m probe let you capture sharp 
images and videos. 
Easily connect to the Extech ExView app to 
wirelessly stream and control the video borescope. 
Detailed side-by-side views and multimedia recording,
ensure you have the documentation you need for 
any project. 
For more details please refer datasheet.

Video Borescope/Wireless Inspection Camera - BR250-5 - EXTECH
Product Overview

Extech's Video Borescope with a 5.2 mm diameter
camera probe makes it possible to inspect hard
to access areas through a small opening. 
It provides a glare-free close-up field of view.
A color wireless monitor is included and can be 
detached from the base and viewed from a remote
location up to 9.8 m (32 ft) away. 
Capture images/videos with date/time stamp and 
play back on the monitor or viewed on a PC.
Ideal for HVAC, home inspection, and automotive
applications.
For more details please refer datasheet.

Borescope Inspection Camera - BR90 - EXTECH
Product Overview

The Extech BR90 is a palm-sized, waterproof (IP67)
8 mm camera probe with a 77 cm (2.5 ft) flexible 
goose-neck cable to retain its configured shape. 
The borescope features a unique compartment to 
coil the camera probe for easy storage. 
Its 640 x 480 pixel resolution, 2x digital zoom,
and built-in bright LED lamps help project viewed 
objects clearly on the large 10.9 cm (4.3 in) 
color LCD display. 
The monitor has adjustable brightness, 
180° image rotation, mirror-flip feature, 
and video output.
For more details please refer datasheet.

Electronic Work Bench - WB-ECE - MARS
Product Overview

Workbench have painted frame and device panel 
made of laminated board

All devices (Instruments, Power Supplies, etc)
are integrated in the device panel with modular 
construction
All fitting supplied with uniform color scheme
Lockable wheels are provided on all four legs
Function Generator(ME 957): 5MHz Function Generator-1no
DC Power Supply (ME 240) : 0 ~ +30V/2A Dual Output-1no
Multimeter (ME 8045) : 4.5 Digit Digital Multimeter-1no
LCR Meter (ME 263H) : 3.5 Digit LCR Meter-1no
For more details please refer datasheet.

Electrical Work Bench - WB-EEE - MARS
Product Overview

Workbench have painted frame and device panel
made of laminated board
All devices (Instruments, Power Supplies, etc) 
are integrated in the
device panel with modular construction
All fitting supplied with uniform color scheme
Lockable wheels are provided on all four legs
Function Generator (ME 957): 5MHz Function Generator-1no
AC/DC Power Supply (ME 172): 0 ~30V/2A Regulated Single Output-1no
DC Power Supply: 0 ~ 220V / 2AUnregulated Single Output-1no
Multimeter (ME 8045): 4.5 Digit Digital Multimeter-1no
LCR Meter (ME 263H): 3.5 Digit LCR Meter-1no
For more details please refer datasheet.

Spectrum Analyser 1GHz - ME 5001TG - MARS
Product Overview

Spectrum Analyzer is used for the early 
test in the development of electrical products,
troubleshooting of CATV/MATV system as well as
the test and trouble diagnosis of cellular 
phone/paging system.
Frequency Range :150KHz to1000MHz
4.5 Digit Display :Center & Marker Frequency,
0.1MHz Resolution
Amplitude Range :-100dBm to +13dBm
Filters : 20KHz, 250KHz & Video Filter
Full Range Built-in :0.15MHz to 1000MHz,
For more details please refer datasheet.

Spectrum Analyzer (9kHz~3.2GHz) - ME 5032 - MARS
Product Overview

Spectrum Analyzer is used for the early 
test in the development of electrical products,
troubleshooting of CATV/MATV system as well as
the test and trouble diagnosis of cellular 
phone/paging system.
6.5'' TFT-LCD Display
Maximum input : -100 ~ +13dBm
Inbuilt Tracking Generator
Output level range: -50~+1dBm(in dB steps and var.)
128MB Data Storage Memory
PC interface using Software
For more details please refer datasheet.

DDS Signal Generator 10MHz/50MHz (with Arbitrary Function) - MFG 2110 / MFG 2150A - MARS
Product Overview

DDS Signal Generator 10MHz/50MHz
(with Arbitrary Function)
Model MFG 2110 - 0.1Hz to 10MHz
Model MFG 2150A - 0.1Hz - 50MHz(4 Arbitrary Waveforms)
Using direct digital Synthesis (DDS) & AWG technology
It features high resolution,high accuracy, high stability,
Direct input using numerical keys,data can be continuously
adjusted using adjusting knobs
Multi waveforms are suitable for various application areas
Standard RS -232 interface, it can be connect with PC
Function Waveform: Sine, Square, Triangle, Positive Ramp, 
Negative Ramp, Random Noise, Sin (x), Indexup, Index down
For more details please refer datasheet.

Function Generators 2MHz/10MHz/15MHz - ME 900 / ME 905 - MARS
Product Overview

Function Generators 2MHz/10MHz/15MHz 
(with AM/FM & Frequency Counter upto 30MHz)
Frequency 0.1Hz ~ 10MHz (For Model ME 900)
Frequency 0.1Hz ~ 15MHz (For Model ME 905)
Output Waveform: Sine,Square,Triangle,±Ramp,±Pulse
Voltage Control Frequency (VCF) capability
TTL/CMOS and output synchronous output
Less than 1% distortion at 10Hz ~ 100KHz
Less than 0.5dB frequency response at 0.1Hz~100KHz
1Hz~30MHz Frequency Counter
AM & FM Output
For more details please refer datasheet.
 

Function Generator 5MHz (with Frequency Counter upto 30MHz) - ME 957 - MARS
Product Overview

Function Generator 5MHz (with Frequency Counter upto 30MHz)
Frequency 0.1Hz ~ 5MHz in 7 ranges
Output Waveform: Sine, Square, Triangle, ±Ramp, ±Pulse
TTL/CMOS output
1Hz~10MHz Frequency Counter
Attenuation: 20dB; 40db & 60dB (20+40dB)
Output Voltage -5V~0V ± 10%
Max. volt-controlled 1000:1
Input Signal DC ~ 1KHz
Input Impedance Not less than 1Mohms/ 20pF
For more details please refer datasheet.

Digital Signal Generator 0.1Hz ~ 15MHz - MAG 2015 AD - MARS
Product Overview

Signal Frequency 0.1Hz~15MHz, continuously
variable waveform Square & Sine
Output attenuator 0dB, 20dB, 40dB, 60dB
Output level 20V p-p in open circuit, not less
than 10V p-p with 50ohms load
Not more than 35ns rising edge of square with in 2MHz
Sine distortion less than 2%,
amplitude-frequency Characteristics:±0.5dB with in 2MHz,
-3dB above 10MHz
Frequency : 20Hz~30KHz
Power supply : 230V±10%, 50Hz
For more details please refer datasheet.

Analog RF Signal Generator 100KHz ~ 150MHz - MAG 450 - MARS
Product Overview

Analog RF Signal Generator 100KHz ~ 150MHz
Advanced Circuit design with imported components 
ensure minimum accuracy deviation
Signal Frequency: 100KHz~150MHz, 3 harmonic up to 450MHz
Output Waveform: Sine and Amplitude modulation wave
RF/AM output, max, intensity > 10V p-p
External modulation signal can be set between 50Hz~20KHz
Frequency accuracy: ±3%
Output waveform RF/AM signal waveform
Output impedance 600ohms
Radio Frequency Over 100mVrms (when frequency <35MHz)
For more details please refer datasheet.

DDS Function (Arbitrary) Generator - MG 1080 - MARS
Product Overview

Product

Data Sheet
Not Found

DDS Function (Arbitrary) Generator
Two same function output 
Using Direct Digital Synthesis (DDS) Technology
1 u Hz - 80 MHz frequency range for main wave forms
High accuracy frequency counter
Arbitrary Setting of start and stop of frequency
sweep output More than 50 kind of output waveform
(Arbitrary Optional)
4.3'' TFT color display
Standard USB(H),USB(D) and Optional LAN interface
PC interface using Software
For more details please refer datasheet.

Frequency Counter 2.4GHz - VC 2000 - MARS
Product Overview

Frequency Counter 2.4GHz
8 digit green LED display with annunciators
Two channels, operation mode memory
Range and gate time adjustable
High safety design.
Frequency measurement : 10Hz~2.4GHz
Crystal measurement : 3.5MHz~16MHz
Channel A (50MHz~2.4GHz)
Input resistance: 50ohms,
Maximum Input : 3V
Channel B (10Hz~50MHz)
Sensitivity : 25m/80mVrms, 
For more details please refer datasheet.

Function Generator 1Hz to 200KHz with Digital Frequency Counter - ME 150L - MARS
Product Overview

Function Generator 1Hz to 200KHz with 
Digital Frequency Counter
"MARS" made Audio Frequency Function Generator 
is ideally suited to electronics test bench.
It is ideally suited to perform experiments 
of Amplifier, Operational amplifier, Frequency 
Response of Filters etc.
Display : LCD type displaying setted frequency 
& type of waveform selected.
Frequency Counter : Int / Ext ( up to 20Mhz)
FREQUENCY RANGE : 1Hz - 200KHz in six steps.
For more details please refer datasheet.

Programmable DC Power Supply (0~36VDC/3Amps) - AE 3645A - MARS
Product Overview

Programmable DC Power Supply (0~36VDC/3Amps)
High stabilized programmable voltage/current
power outputs
Menu operation by front keypad and rotary switch
Large LCD display with backlit
Output continuously adjustable output
Maximum current/power output presetable
Constant current/voltage/power output mode
Over current, voltage and over power protection
Memory: Store & recall setup data for diff. applications
Series/parallel connections
For more details please refer datasheet.
 

4½ Digital Multimeter (True RMS) - MDM 8145 - MARS
Product Overview

DC/AC Voltage, DC/AC Current, Resistors,
Diode 6 Functions

0.5”LED Display, Resolution 10 V, 10nA,10mohm
All measure range has protected circuit
0.03% DCV Accuracy
Automatic Zero Adjustment
AC Current 20Amp, AC Voltage 1200V
AC True RMS or AC+DC True RMS.
DC Voltage: 200mV 2V 20V 200V 1200V, 
Accuracy: +0.03% +4digit
Impedance :10mohm
For more details please refer datasheet.
 

3.5 Digit Digital Multimeter (Manual Range) - VC 890D - MARS
Product Overview

3½ Digit Digital Multimeter (Manual Range)
LCD Display, Max. Upto 1999
Manual operation
Diode test, Triode test, Continuity test, Low 
Battery indication, Data hold
Auto power off, Function protection, Self recover
protection, Shock
Protection
Measure AC, DC Voltage & AC, DC Current,
Resistance, Capacitance
AC Frequency Response : 40 ~ 400Hz
For more details please refer datasheet.

3.75 Digit Digital Multimeter (Auto Range) - VC 97 - MARS
Product Overview

3¾ Digit Digital Multimeter with Frequency
Counter of 30 Mhz (Auto Range)

LCD Display, Max. Upto 3999
Diode test, Triode test, Continuity test,
Low Battery indication, Data hold,
Auto power off, Function protection, Shock
protection, Relative value
Measurement, Frequency / Duty measurement
Measure AC, DC Voltage & AC, DC Current , 
Resistance, Capacitance
Temperature, Frequency
For more details please refer datasheet.
 

3 3/4 Digital Clamp Meter (Auto Range) - MS 2002A - MARS
Product Overview

3 ¾ Digits LCD with 42-segements bar graph,
max. reading 3999
SMT application
Auto/ Manual range
Data hold & LCD backlighting
Low battery indication
Audible continuity
Over load protection
DCV : 400/600V, ± 1.0%
ACV : 400/600V, ± 1.5%
ACA : 40/400A, ± 2.0%
For more details please refer datasheet.

3 /1/2 Digital Open Jaw Electrical Tester - MS 2600 - MARS
Product Overview

New open-jaw technology for AC current
measurement, easy to operate
Test leads can be inserted on back groove
of the tester
Versatility of use with capacitance, frequency
and duty cycle measurement
3 ¾ Digits LCD display
Auto/ Manual range
Data hold & LCD backlit
DCV : 4/40/400/1000V, ± 0.7%
ACV : 4/40/400/750V, ± 0.8%
For more details please refer datasheet.

Digital Panel Meter - ME 256 / ME 256B - MARS
Product Overview

Desk top panel meters (3.5 Digit LED/ LCD) suitable
for measuring anyone of the following parameters
DC Voltage : +199.9mV, +1.999V, +19.99V, +199.9V, +100V
AC Voltage : 199.9mV, 1.999V, 19.99V, 199.9V, 750V
DC Current : +199.9mA, +1.999mA, +19.99mA, +199.9mA,
             +1.999mA, +19.99A
AC Current :199.9mA, 1.999mA, 19.99mA, 199.9mA,
            1.999A, +19.99A
Accuracy : +0.1%
Line Power Supply : 230V +10%, 50Hz 
Inbuilt Power Supply : +9VDC Battery operated 
For more details please refer datasheet.

Handheld Thermal Imaging Camera - TIC 300 - MECO
Product Overview

TIC300 is a Thermal Imaging Camera which combines the
functions of surface temperature measurement and real-time
thermal imaging.
Display : 2.4" Color Display
Resolution : 60 X 60
Total Pixels : 3600
FOV / Shortest Focal Length : 20° x 20° / 0.5m
Thermal Sensitivity : 0.3°C
Measuring Mode : Infrared Focal Plane Measuring Termperature
Temperature Range : -20°C ~ 300°C / -4°F ~ 572°F
Measuring Accuracy : ±2% digital / ±2°C
Wavelength Range : 8 ~ 14µm
For more details please refer datasheet.

Humidity & Temperature Meter - 920P - MECO
Product Overview

Humidity & Temperature Meter
Functions: °C/°F/RH Selection, MAX/MIN, Auto Power Off
Range: 0% ~ 100% RH
Accuracy: ±3%RH (25°C, 20 ~ 80% RH), ±3.5%RH
(At Other Ranges)
Resolution: 0.01%RH
Temperature Measuring
Range: -20°C ~ 80°C / -4°F ~ 176°F
Accuracy : ±0.5°C / ±0.9°F (25°C), ±0.8°C 
/ ±1.5°F (At Other Ranges)
Resolution: 0.01°C / 0.01°F
For more details please refer datasheet.

Air Flow Anemometer - 961P - MECO
Product Overview

Air Flow Measuring
Functions : m/Sec, Ft/min, Knots, Km/h,
MPH, CFM, MAX/MIN/HOLD,Auto Power Off
Range : 1 ~ 25 m /s
Accuracy : ± (3% rdg ± 0.2 m /s)
Resolution : 0.01 m / s
Temperature Measuring
Range : 0 ~ 50°C, 32 ~ 122°F
Accuracy : ±2°C / ±4.0°F
Resolution : 0.1°C / 0.1°F
For more details please refer datasheet.

Digital Sound Level Meter - 970P - METREX
Product Overview

Digital Sound Level Meter
Functions :  MAX / MIN / HOLD, Auto Power Off
Range :  35 dB ~ 130 dB (31.5 Hz ~ 8 kHz)
Accuracy : ±1.5 dB ( under reference condition)
Resolution : 0.1 dB
Power : 9 V Battery
Dimension : 172 x 56 x 39 mm (approx)
Weight : 144 gms Including Battery (approx)
Accessories : Carrying Case, Inst.Manual,
9 V Battery (installed)
For more details please refer datasheet.

Humidity & Temperature Meter - 920K - MECO
Product Overview

Ambient Temperature / Wet Bulb Temperature / 
Dew-Point Temperature : -20 ~ 0°C, 0 ~ 60°C,
-4 ~ 0°F, 0 ~ 99.99°F, 100 ~ 140°F
Humidity : 0 ~ 100% RH
°C / °F Selectable
Comfort Indicator
Auto Ranging
Data Hold
Backlight
Auto Power Off
Low Battery Indicator
Weight : 90gms Including Battery (approx.)
For more details please refer datasheet.

Anemometer - 961K - MECO
Product Overview

Anemometer (Professional Series)
m/s (meter per second): 0.80 ~ 30.00 m/s, 
30.00 ~ 40.00 m/s
Km/h (kilometer per hour): 2.88 ~ 108.0 km/h,
108.0 ~ 144.0 km/h
ft/s (feet per second) : 2.62 ~ 98.50 ft/s,
98.50 ~ 131.2 ft/s
knots (nautical miles per hour) : 1.6 ~ 58.30
knots, 58.30 ~ 77.70 knots
mile/h (mile per hour) : 1.80 ~ 67.20 mil/h,
67.20 ~ 90.00 mil/h
For more details please refer datasheet.

Sound Meter (Professional Series) - 970K - MECO
Product Overview

Sound Meter (Professional Series)
dB : 30dB ~ 130dB
Sampling Rate: Fast-125ms,Slow-1000ms 
Noise: A Weighting
Unit: dB
MIN / MAX
Data Hold
Backlight
Auto Power Off
Low Battery Indicator
Weight : 120gm Including Battery 
For more details please refer datasheet.

Coating Thickness Gauge - 990K - MECO
Product Overview

Coating Thickness Gauge
Measuring Range: 0~1250μm,0-49.5mil
Auto Ranging
Display Type: 1.44 inches TFT LCD
Metal Type: Ferrous/Non-Ferrous
Measurement Method:Single/Continuos
MIN/MAX/AVG
Unit: μm/mil
Data Hold
Backlight
Data Storage: 100 Groups
For more details please refer datasheet.

Laser Distance Meter - LDM100+ - MECO
Product Overview

Laser Distance Meter
Display Illumination [Backlight]
Min / Max, Measurement / Continuous Measurement
Addition / Subtraction
Pythagoras Measurement
Area / Volume Calculation
Wall Area Measurement
Triangular Area Measurement
Stake out Measuremen
Laser Emission Indicator
Front/Back Benchmark Measuring Datum Selection
For more details please refer datasheet.

Laser Distance Meter - LDM60+ - MECO
Product Overview

Laser Distance Meter
Display Illumination [Backlight]
Min/Max,Measurement/Continuous Measurement
Addition / Subtraction
Pythagoras Measurement
Area / Volume Calculation
Wall Area Measurement
Triangular Area Measurement
Stake out Measuremen
Laser Emission Indicator
Front/Back Benchmark Measuring Datum Selection
For more details please refer datasheet.

Combustible Gas Leak Detector - 950K - MECO
Product Overview

Combustible Gas Leak Detector (Professional Series)
Combustible Gas : 0 ~ 9999 ppm, 0 ~ 20.00% LEL 
Auto Ranging
Sensitivity : <50 ppm (Methane)
Response Time : <2 Seconds
Warm-up time : 30 Sec (approx.)
Refresh Rate : 400 ms
Flexible Probe : 16 inch
MIN / MAX / AVG
Unit : ppm, %LEL
Data Hold
For more details please refer datasheet.

Precision Battery Tester - BT6065, BT6075 - HIOKI
Product Overview

The Precision Battery Tester BT6065 and BT6075
are designed for OCV/AC-IR testing of high-capacity 
EV battery cells with low internal resistance. 
The extremely high resolution enables these models
to perform advance cell-grading. 
These testers powerfully facilitate the creation
of reliable and efficient OCV/IR testing systems
with their innovative features and capability of 
high-speed testing.
For more details please refer datasheet.