Product Overview

Streamline UPS and lead-acid battery diagnostics with measurement and recording guidance
Resistance measurement range: 3 mΩ to 3 Ω, 4 ranges
Accuracy: ±0.8 % rdg.
Testing source frequency: 1 kHz ±30 Hz
Testing current: 160 mA,16 mA, 1.6 mA 
Voltage measurement range: ± 6 V to ± 60 V,2 ranges, Accuracy: ±0.08 % rdg ±6 dgt
Temperature Measurement range: -10°C to 60°C
Measurement accuracy*: ±1.0°C (±1.8°F)
Power supply: LR6 (size AA) alkaline battery ×8
For more Details refer datasheet

Product Overview

Fully Automated Production Line Testing of Large Cells for EVs or Mid-sized Packs of up to 100 V
Resistance measurement ranges: 3 mΩ to 3 kΩ
Basic accuracy: ±0.5% rdg 
Measurement frequency: 1 kHz ±0.2 Hz
Measurement method: AC four-terminal method
Voltage measurement ranges: 6 V to 100 V 
Basic accuracy: ±0.01% rdg. ±3 dgt.Response time    10 ms
Functions: Contact check, Zero adjustment (±1000 counts), Pulse measurement, Comparator (Hi/ IN/ Lo), Statistical calculations (Max. 30,000), Delay, Average, Panel saving/loading, Memory storage, LabVIEW® driver
Power supply    100 to 240 V AC, 50 Hz/60 Hz, 35 VA max.
For more details refer datasheet
 

Product Overview

High-Voltage Battery Tester for Measuring EV and PHEV Battery Packs.
Resistance measurement ranges:3 mΩ to 3kΩ,7 ranges.
Accuracy: ± 0.5% rdg.
Testing source frequency: 1 kHz ± 0.2 Hz,
Voltage measurement ranges:    10 VDC to 1000 VDC.
Accuracy: ± 0.01% rdg.
Comparator functions:Judgment result: Hi/IN/Lo 
Power supply: 100 to 240 V AC, 50/60 Hz, 30 VA max.
For more details refer datasheet

Product Overview

MECO BM63 is a portable Battery (Load) Meter which can check the capacity condition of different types of batteries from4 to 500Ah.
The product consists of a Load Resistor and Testing Clip. The state of the battery is indicated on the meter dial as 'FULLUP' (White), 'NORMAL' (Green),'RECHARGE' (Yellow), 'DISCHARGE' (Red) directly.
DC Voltmeter : 0 -15V DC
Rated Voltage of Battery to be Tested : 2, 6, 12V DC
Rated Capacity of Battery to be Tested : 4 - 500Ah
Weight : 550gms (approx.)
Dimensions : 220 x 120 x 70mm (approx)
For more details refer datasheet

Product Overview

DIGITAL BATTERY METER (UPTO 200 AH & 12V) - LOAD TESTER 
LED Indication of Battery Condition : GOOD (Green), WEAK (Yellow) & BAD (Red)
Rated Voltage of Battery to be Tested : 6, 12V DC
Rated Capacity of Battery to be Tested : 40 ~ 200Ah
Built-In 10 Seconds Timer to Auto Cut-Off Load After Test
Temperature Rise is Controlled (for Circuit Protection)
Two Way Internal Resistance Measurement
LED Indication of Battery Condition : 
GOOD (Green), WEAK (Yellow) & BAD (Red)
Battery Load Test Current : 80A
Weight : 900gms (approx.)
Dimensions : 205 x 115 x 70mm (approx)
For more details refer datasheet

Product Overview

Motorcycle / Two Wheeler Battery Meter (12V, 3 TO 20AH) 
Display of Battery Condition [Good / Caution / Replace].
CCA Range : 100 ~ 1000
Ah Range : 3 ~ 20Ah (not continuos)
Voltage Range : 9 ~ 16V ±3%
Weight : 266g (approx.)
Dimensions : 146 x 82 x 25mm (approx.)
For more details refer datasheet.

Product Overview

Vehicle Battery System Meter with Built - In Printer Suitable for 12 and 24 V DC Batteries
CCA Range : 100 ~ 1700
IEC Range : 100 ~ 1000
EN Range : 100 ~ 1700
DIN Range : 100 ~ 1000
Battery Voltage : 12V / 24V
Display Battery Condition : GOOD / OK / Pay Attention / Replace
Safety Standard : CAT III 600V
Weight : 450g (approx.)
For more details refer datasheet.

Product Overview

The Extech BT100 is a Battery Capacity Tester. 
We can use to test the condition of batteries quickly and easily.
On-line testing without disconnecting battery
Built-in datalogger manually stores up to 999 sets and 
9600 sets for continuous datalogging
Simultaneously measures DC Voltage and AC Milliohms 
Includes Windows® 95/98/NT/2000/ME/XP compatible 
software for downloading readings to a PC
For more details refer datasheet.

Product Overview

MECO VBSM6129B is a portable Vehicle Battery System Meter
Overload Protection to ensure Operator Safety
Loose Lead Detection 
CCA Range : 100 ~ 1700
IEC Range : 100 ~ 1000
EN Range : 100 ~ 1700
DIN Range : 100 ~ 1000
Battery Voltage : 12V
For more details refer datasheet.

Product Overview

MECO ABM18 is a portable Automobile Battery Tester 
which can check the capacity condition of different
types of Motorcycle and Motorcar batteries from 2 to 200Ah. 
The product consists of a Load Resistor and Testing Clip.
The state of the battery is indicated on the meter dial as 
'FULLUP' (White), 'NORMAL' (Green),'RECHARGE' (Yellow), 
'DISCHARGE' (Red) directly.
Rated Voltage of Battery to be Tested : 2, 6, 12V DC
Rated Capacity of Battery to be Tested : 2 - 200Ah
Dimensions : 225 x 124 x 68mm (approx)
For more details refer datasheet

Product Overview

Meco VBSM6246 is a Vehicle Battery System Meter 
Display of Battery Condition [Good/Ok/Pay Attention/Replace] 
Overload Protection to ensure Operator Safety
Loose Lead Detection 
Reverse Polarity Protection
Internal Unit Conversion CCA/IEC/EN/DIN
Battery Recharge Indicator, 
Detects and Display Bad Cell
CCA Range : 100 ~ 1700
IEC Range : 100 ~ 1000
EN Range : 100 ~ 1700
For more details refer datasheet

Product Overview

The Precision Battery Tester BT6065 and BT6075
are designed for OCV/AC-IR testing of high-capacity 
EV battery cells with low internal resistance. 
The extremely high resolution enables these models
to perform advance cell-grading. 
These testers powerfully facilitate the creation
of reliable and efficient OCV/IR testing systems
with their innovative features and capability of 
high-speed testing.
For more details please refer datasheet.