Challenger Series Panel Meters - 361, 362, 363 and 364 - RISHABH
The Challenger range of Analog Panel meters
offer accurate measurement and indication
of most electrical and electronic parameters
in industry standard 1½”, 2½”, 3½” and 4½”case sizes.
This innovative design features a detachable lower
fascia plate which allows the flexibility of
either surface or window mounting.
Surface or window mounting.
Rear zero adjuster on moving coil meters.
High torque pivot and jewel movement.
True RMS measurement meters.
For more details please refer datasheet.
|
Moving - Iron Meter - AC ammeters and voltmeters 90deg (EQ) - RISHABH
The moving iron-panel meters,EQ 48/72/96/144 housed
in moulded polycarbonate cases are suitable
for the measurement of AC currents and voltages
in the usual frequency range of 15...100Hz.
Scale interchangeability.
Near linear scale.
Glass filled polycarbonate housing. (UL 94 V-0)
Easy installation with swivel screws.
Knife edge pointer.
Easily replaceable glass and bezel
For more details please refer datasheet.
|
Moving Coil Meter - DC Ammeters and Voltmeters 90deg(PQ) - RISHABH
All Rishabh meters are housed in robust
case with classical finish.
The case is made of polycarbonate,
which is flame retardant and non-drip
and confirms to international regulations
UL 94 V-0. Polycarbonate is a very tough
and light weight engineering plastic material
which has got the best mechanical properties
very close to a metallic housing.
Easy installation with swivel screws.
For more details please refer datasheet.
|
Moving Coil Meter - AC ammeters and voltmeters with rectifier 90deg (VQ) - RISHABH
All Rishabh meters are housed in robust
case with classical finish.
The case is made of polycarbonate,
which is flame retardant and non-drip
and confirms to international regulations
UL 94 V-0. Polycarbonate is a very tough
and light weight engineering plastic material
which has got the best mechanical properties
very close to a metallic housing.
Easy installation with swivel screws.
Easily replaceable glass and bezel
For more details please refer datasheet.
|
Analogue Pointer - Frequency meter 90deg (ZQ) - RISHABH
All Rishabh meters are housed in robust
case with classical finish.
The case is made of polycarbonate,
which is flame retardant and non-drip
and confirms to international regulations
UL 94 V-0. Polycarbonate is a very tough
and light weight engineering plastic material
which has got the best mechanical properties
very close to a metallic housing.
Easy installation with swivel screws.
Easily replaceable glass and bezel
For more details please refer datasheet.
|
Analog Panel Meter - Vibrating Reed frequency meter (FQ) - RISHABH
The reed type frequency meters,FQ 72/96 housed
in moulded polycarbonate cases are suitable
for the measurement of frequencies
in the range of 45 to 65 Hz.
These instruments offer several advantages
in switchboard and Generating Set Panels.
Number of meters can be mounted in a
single Cut out (Mosaic mounting).
Front glass, Bezel & Dial can be easily replaced.
Easy installation with swivel screws.
Glass filled polycarbonate housing(UL 94 V-0)
For more details please refer datasheet.
|
Power Factor meter 90deg - CQ 72/96/144 - RISHABH
The moving coil indicators CQ 72/96/144
and a phase angle adjuster are used to
monitor changing power factor conditions
on ir-reversible balanced load systems
& Unbalanced System.
These instruments offer several advantages
in switchboard and Generating Set Panels.
Number of meters can be mounted in a
single Cut out (Mosaic mounting).
Front glass, Bezel & Dial can be easily replaced.
Easy installation with swivel screws.
For more details please refer datasheet.
|
Power Meter 90deg - WQ 96/144 - RISHABH
The Watt meters, WQ96/144 are offered for the AC systems
-single phase
-3 phase balanced load 3 or 4 wire
-3 phase unbalanced load 3 or 4 wire
These instruments are suitable to indicate forward(export/
out going) and reverse (import/in coming) power flow.They
can be used both on sinusoidal and non-sinusoidal current
These meters offer several advantages in Switchboard and
Generating Set panels. Number of meters can be mounted in
a single Cut out (Mosaic Mounting).The Bezel, Front window
glass and Dial can be easily replaced
For more details please refer datasheet.
|
Maximum Demand Ammeters - BIQ 48/72/96 / BIEQ 72/96 - RISHABH
The maximum demand ammeters BIQ 48/72/96/BIEQ 72/96
housed in moulded polycarbonate cases,monitor
the most economic use of transformer stations
& LT distribution feeders by indicating
the thermal/ time characteristics of the load.
Knife edge pointers.
Terminal protection with click-fitting back cover
Easily replaceable glass and bezel.
Near linear scale for MI scale in BIEQ.
User accessable reset Knob.
For more details please refer datasheet.
|
Moving Coil meter - DC ammeters and voltmeters 240deg(PL) - RISHABH
The moving coil panel meters, PL 48/72/96/144
housed in moulded polycarbonate cases
are suitable for the measurement of DC
Glass filled polycarbonate housing (UL 94-V-0)
Terminal protection with click-fitting back cover
Easily replaceable glass and bezel.
Near linear scale for MI scale in BIEQ.
Better resolution.
Knife edge pointer.
User accessable reset Knob.
For more details please refer datasheet.
|
Moving Coil Meter - AC ammeters and voltmeters with rectifier 240deg (VL) - RISHABH
The moving coil,rectifier panel meters,VL 72/96/144
housedin moulded polycarbonate cases are suitable
for the measurement of AC currents and voltages.
Terminal protection with click-fitting back cover.
Better resolution.
Knife edge pointer.
Mounting arrangement
Linear scale.
Less VA burden.
Easily replaceble glass and bezel.
Glass filled polycarbonate housing (UL 94-V-0)
For more details please refer datasheet.
|
Frequency meter 240deg - ZL 96/144 - RISHABH
The pointer type frequency meters,ZL 96/144
housed in moulded polycarbonate cases
are used for the measurement of frequencies
in the range of 45 to 450 Hz.
For maximum accuracy,the essential
measuring range is obtained
by supressing the unwanted frequency span.
Terminal protection with click-fitting back cover.
Easily replaceble glass and bezel.
Glass filled polycarbonate housing (UL 94-V-0)
For more details please refer datasheet.
|
Power Factor Meter 240deg - CL 96/144 - RISHABH
The moving coil indicators CL 96/144
and a phase angle adjuster are used
to monitor changing power factor conditions
on ir-reversible balanced load systems.
These meters offer several advantages
in Switchboard and Generating Set panels.
Number of meters can be mounted in
a single Cut out (Mosaic Mounting).
Terminal protection with click-fitting back cover.
Easily replaceble glass and bezel.
Glass filled polycarbonate housing (UL 94-V-0)
For more details please refer datasheet.
|
Power meter 240deg - WL 96 /144 - RISHABH
The Watt and Var meters, WL 96/144
are offered for the following AC systems
- single phase
- 3 phase balanced load 3 or 4 wire
- 3 phase unbalanced load 3 or 4 wire
These instruments are suitable to indicate
forward (export/out-going) andreverse
(import/incoming) power flow as well as
inductive and capacitive reactive power.
They can be used both on sinusoidal
and non-sinusoidal current.
For more details please refer datasheet.
|
Analog Panel Meters - Anush Series - RISHABH
The 011 and 012 Anush Series
are analog panel meters that measure AC/DC
voltage or current and frequency.
They are available in industry standard
sizes and have a detachable lower fascia
that allows for surface or window mounting.
The Anush Series also has a rear zero
adjuster screw for tamperproof installation.
Measuring and indication of AC amps, volts,
frequency and DC signals.
Surface of window mounting.
For more details please refer datasheet.
|
Dual Moving Iron AC meters - EQ 2 in 1 - RISHABH
The moving iron panel meters, 2-in-1
housed in moulded polycarbonate cases are
suitable for the measurement of AC
currents for frequency range of 15...400Hz
and voltages in the frequency range of 15...100Hz.
Two different meters in one case.
Near linear scale.
Glass filled polycarbonate housing(UL 94 V-0).
Easily replacable glass & bezel.
Knife edge pointe
Terminal screws and clamps
Terminal protection with click-fitting back cover
For more details please refer datasheet.
|
Dual Moving Coil DC Meters - PQ 96/144 2 in 1 - RISHABH
The moving coil panel meters, 2 in 1 PQ
housed in moulded polycarbonate cases
are suitable for the measurement
of DC currents and voltages
These instruments offer several advantages
in switchboards and Generating Set Panels.
Two different meters in one case.
Linear scale.
Glass ¿lled polycarbonate housing(UL 94 V-0).
Easily replacable glass & bezel.
Knife edge pointe
For more details please refer datasheet.
|
Elapsed Time Meter (Hours Run Meter) - ETM 72/96 - RISHABH
Elapsed Time Meters ETM 72/96 housed
in moulded polycarbonate cases are suitable
for the measurement of run time of machines,
equipments and other devices.
Applications:- Business Machines,Control Panels,
Compressors,Generators,Pumps,Air Conditioning.
Elapsed Time Meters (Hours Run Meters) are used
to monitor ON/RUN time of plant/equipment which
allows the user to check functions such as Production
Efficiency, Cost and service period monitoring.
The time is measured in increments of 0.01 to 99999.99 hour.
Non resettable to prevent accidental resetting.
For more details please refer datasheet.
|
Analog Panel Meter - RISH VISTA - RISHABH
The RISH VISTA range of analog panel meters
offers accurate measurement and indication
of most electrical and electronic parameters
in industry as per industrial standard case size
Measuring and indication of AC amps, volts and DC signals.
Panel mounting.
High torque pivot and jewel movement.
True RMS measurement meters.
AC and DC inputs.
Up to 50A DC direct connected.
Up to 50A AC direct connected.
For more details please refer datasheet.
|
Cam Switch - RISH Cam Spring Return Series - RISHABH
Spring Return Switches provide contacts
that are held closed only when the switch is
turned against the mechanism spring.
The mechanism returning the contacts to their
original state upon release of the actuator.
This type of switches are known as
''Momentary switches''.
Compact Design
60 & 90 Degree Angle of Throw
Flag Type Knob Handle
Spring Loaded Mechanism
For more details please refer datasheet.
|
Cam Switch - RISH Cam TNC Series - RISHABH
TNC switch is a three position switch
when it is in close position it put
the circuit breaker in operation by e
nergizing the closing coil and when it
is in a trip position it will trip the
circuit by energizing the trip coil in
the circuit breaker.
The switch return to neutral position after
any operation (either close or trip).
Spring Loaded Mechanism
Standard Mounting Plate
For more details please refer datasheet.
|
Cam Switch - DB Switch with LED indication - RISHABH
Rishabh's new 'DB Switch with LED Indication'
offers a wide application of Phase Changeover
in Distribution Box panels.
It switches from one phase to another phase
in case of the failure of the selected phase.
Three Phase indication
Output indication
Wiring Routing
Compact Size
Reliable Design
Quick & Easy Installation
Protection Class
For more details please refer datasheet.
|
Cam Switch - Rish Cam Reverse Forward Switch - RISHABH
Rishabh’s new RISH Cam Reverse Forward Switch
offers a wide application in motor controlling
with maximizing benefits. These switches have
wide application in motor control for changing
the direction of rotation in Forward and Reverse
way with 2 pole and 3 pole options.
Reverse Forward Switches have 3 different
operating position–REV,OFF and FOR.
100,000 operations at 300 cycles / hour
IP50 Protection to front facia
Self-lifting terminal clamp assembly
For more details please refer datasheet.
|
Cam Switch - Rish Cam I,C,M &INS - RISHABH
Rishabh's New Rish Cam I,C,M &INS
rotary cam Switches offer a complete
range of cam switches for control,
Instrumentation and motor starting
applications , maximizing the benefits
and optimizing your use of asset.
Multi-step Switches
Volt-Ammeter Switches
Selector Switches
Mains Switching
Coolant Pumps
For more details please refer datasheet.
|
Current Transformer - Nano 3 phase CT - RISHABH
Rish Nano 3 Phase CT is a very reliable, efficient
and robust current transformer for measurement of AC current.
It provides 100 mA AC output.
It can be used in Circuit breakers,Earth Leakage Protection.
Measurement of AC current for frequency 50/60Hz.
High electric isolation between primary conductor and output.
Easy and safe electrical connection.
Primary rated current 63A,125A and 250A AC.
1500 mm long Secondary Cable for 63 A,125 A & 250 A product.
For more details please refer datasheet.
|
Current Transformer - Single phase RJ 12 CT - RISHABH
Rish 1 Phase RJ 12 CTs are Square encapsulated
with UL94V-0 approved polycarbonate.
It has RJ12 100mA secondary output with RJ12
interface cable, Available from 50A-800A
primary current in 4 different sizes
Transmission of measuring signal to the measuring
unit via RJ12 connection cable
Primary Current 50A to 800A.
RJ12 socket for fast connection eliminate wiring errors.
Various mounting options like bus bar mounting,
wall mounting, Universal din-rail mounting
Sealing cap for tamper-proof connection
For more details please refer datasheet.
|
3 Phase Current Transformer - RISH XMER 3PH Series - RISHABH
RISH XMER 3PH Series has Compact size.
Wide range of system current Ratings.
Insulation class :-E(120°C max)
Test voltage:- 3KV 50 Hz for 1 minute.
Operating frequency:- 50Hz/60Hz
Rated Primary current :- 40Ato 800A
Rated secondary current :- 5Astandard
Continuous current :-1.2X Rated current
Rated system voltage :- 0.72/3KV
Ambient temperature range:- -25°C to +40°C
Storage temperature range:- -50 to +80°C
For more details please refer datasheet.
|
RISH Resin Cast Metering CT - LTRC SERIES - RISHABH
Rish resin cast CTs are square type
and molded with epoxy resin.
Metering CTs feature with transparent
terminal cover & wide range
of primary current ratings,case widths.
Wall or foot mounting options available.
Features:
Compact size.
Wide range of system current Ratings.
Transparent terminal cover.
Wall mounting.
Terminal with self lifting screw
For more details please refer datasheet.
|
Current Transformer - RISH RESIN CAST PROTECTION CT - RISHABH
Rish resin cast protection CTs are square
type and molded with epoxy resin.
Protection CTs feature with transparent terminal
cover & wide range of primary current ratings,case widths.
Wall or foot mounting options available.
Transparent cover with IP 20 protection to terminals
Wide range of system current Ratings
Terminal mark ing engraving
Wall mounting
Terminal self lifting clamp assembly
For more details please refer datasheet.
|
Round CTs - RISH TW Series - RISHABH
Rish TW series round type CTs are housed
in robust case with classical finish.
The case is made of polycarbonate,
which is flame retardant and non-drip and
confirms to international regulations UL 94 V-0.
Polycarbonate is a very tough and light weight
engineering plastic material which has got
the best mechanical properties very
close to a metallic housing.
Comprehensive measurement of class accuracy.
Cost effective moulded case current transformer.
For more details please refer datasheet.
|
Rish Summation CT - RISH XMER Sigma - RISHABH
RISH XMER Sigma Summation current transformers
are designed to summarize several synchronous
Alternating Currents of equal phase relation
with any angle of phase difference,
They are used to add secondary currents of
several mainc.t.’s in order to
measure with one CT only.
Nickel Plated Secondary Terminals with +/- Screws
Terminal Protection IP10
Rated Short Time Thermal Current-60 X In
Dynamic Short circuit Current 2.5 X Ith
Highest Voltage of Equipment 720V
For more details please refer datasheet.
|
Core Balance Current Transformer - Rish CBCT - RISHABH
Rish CBCT is a Core Balance Current Transformer
used to detect & measure leakage current
passing through the electrical system.
Further the secondary output of the CBCT
is connected to protection device such as
Earth Leakage Relay to protect the
installation & operating personnel
from possible hazards.
Turns Ratio : 600:1
Leakage current measurement : 30mA to 30A
Cable tie Clips: Cable tie clips are located on
the CT to ensure that busbar is centrally
aligned so as to get absolute output.
For more details please refer datasheet.
|
Square Type Current Transformer - RISH X'mer Series - RISHABH
There are two main types of Rish X’mer CTs.
The first one is Rish X’mer wound primary series
CTs which consists of both primary and secondary windings.
This type has two sizes 62/W (40) and 74/W (40).
The second type is Rish X’mer series window type CTs
which consists of secondary winding and primary
has to be wound through the hole provided.
Comprehensive measurement of class accuracy.
Cost effective moulded case current transformer.
Various mounting options like wall mounting,
cable mounting, bus bar mounting, DIN rail mounting.
Wire sealable terminal covers.
For more details please refer datasheet.
|
Split Core CT's - RISH Xmer - RISHABH
Rish Split core type CTs are housed in
robust case with classical finish.
The case is made of polycarbonate,
which is flame retardant and non-drip
onfirms to international regulations UL 94 V-0.
Polycarbonate is a very tough and light weight
engineering plastic material which has got the
mechanical properties close to a metallic housing.
Comprehensive measurement of class accuracy.
Wide range of system current ratings and bus bar sizes.
Cts manufactured as per IEC 60044-1 & IS 2705-1
Operation free installation is possible.
For more details please refer datasheet.
|
Round Current Transformer - RISH TW-E SERIES - RISHABH
Rish TW-E series round type CTs are housed
in robust case with classical finish.
The case is made of polycarbonate,
which is flame retardant and non-drip and
confirms to international regulations UL 94 V-0.
Polycarbonate is a very tough and light weight
engineering plastic material which has got the best
mechanical properties very close to a metallic housing.
Test voltage 3KV 50Hz for 1minute.
System voltage 720V max.
Ratio ratings from 50/5A to 5000/5A.
For more details please refer datasheet.
|
Split Core CT - RISH Compact - RISHABH
Rish Compact Split core CTs are compact
in size as compared to earlier Split core
CTs and encapsulated with UL94V-0 approved
polycarbonate having an openable jaw which
has special kind of locking profile
to avoid accidental opening.
Two options for Bus Bar Mounting
Cable Tie provision for faster installation
Safety Plug in shorting link
Available with M4 Size Terminals
Wide range of system current ratings
Assured Core contact with Latching Type Snap fitment
For more details please refer datasheet.
|
Shunts - Rish Shunts - RISHABH
The RISH Shunts are available from 1A upto 3000A
with an accuracy of 0.5% & 1%.
Standard voltage drop is 50mV,60mV,75mV & 150mV.
Intermediate current ratings,other voltage outputs,
better accuracy and purpose built shunts can be supplied.
Rating 1A to 15000A
Riveted and brazed construction
In-line bus bar mounting
Very low temperature coefficient
high overload withstand
Shock and vibration proof
DIN shunts of 1...25 A with base.
IS shunts of 1...30 A with base.
For more details please refer datasheet.
|
