Product Overview

The Digital meter PROGRAMMABLE RISH Eine NX have
been designed for industrial application ,which frequently
require precise and on-site adjustment of the display range. It
can be used in industrial automation and for laboratory uses.
Attractive look with two touch keys.
3 digit or 4 digit ultra bright 7 Segment LED display.
Fast & Easy Installation on panel with click fit arrangement
Ultra bright LED Display
On site programmable PT parameters
On site programmable CT parameters
Enclosure Protection for dust and water
For more details please refer datasheet.
 

Product Overview

RISH DPM Hz measures important electrical parameters
like Frequency & RPM. 
True RMS measurement:
Measures distorted waveform up to 15th Harmonic.
RPM Measurement: 
The instrument display Rotation per minutes for 
generator applications. Number of poles can be set 
digits Ultra Bright LED display: 
Display range upto 9999.
Enclosure Protection for dust and water: 
Conforms to IP 50 (front face) as per IEC60529
For more details please refer datasheet.

Product Overview

RISH Eine+ has been designed for industrial applications,
which frequently require precise and on-site adjustment 
of the display range. It measures electrical DC parameters 
like DC voltage and DC current.
Low Back Depth
Rescalable Display range
Function keys
Bent Characteristics
Power Factor Display
Ambient Temperature Indication
Auxillary Supply
4 Full digits Ultra Bright LED display
For more details please refer datasheet.

Product Overview

The digital panel meters RISH Eine DPM 
have been designed for industrial  applications, 
which  frequently  require  precise  and on-site  
adjustment  of  the  display  range.
we can used in industrial automation and for laboratory uses.
RISH Eine DPM measures important electrical parameters in 3 phase 
4 Wire,  3 phase  3 Wire and single phase Network & 
replaces the multiple analog panel meters.
Fast & Easy Installation on panel with the help of
external swivel screws.
User selectable CT/PT Secondary.
4 Digits ultra bright LED Display
For more details please refer datasheet.
 

Product Overview

N30U is a 5-Digit 3 coloured LED display meter 
programmable as interval or limit in 3 ranges 
through PD14 programmer/ LPConfig software. 
Universal programmable input and outputs RS485, 
Analog & Relay output.
IP10 - from Terminal Side
IP65 - from Frontal Side,
3-colour display (14 mm height),programmable in 3
ranges of the displayed value.
21-point individual characterisƟc(indicaƟon rescaling)
For more details please refer datasheet.

Product Overview

N32H meter is a Programmable digital meter 
of destined for DC Circuit parameters.
It has a modern and easy-to-read LCD display 
with universal measuring input and inbuilt RS-485 digital output
Voltage measurement ±600V (maximum range display ±1200 v), 
current measurement via shunt, power, 
energy and capacity measurement of d.c. circuits
Two-line LCD display with high contrast 
For more details please refer datasheet.

Product Overview

The N30U meter is destined for the measurement 
of temperature, resistance and standard signals
Resistance thermometers: PT100, PT500, PT1000
Thermocouples: J, K, N, E, R, S
Resistance: 400 ohm,4000 ohm
Current: ± 20 mA
Voltage: 0…10 V, -10…60 mV
Output: relay (4),analog (1),digital RS-485/MODBUS(1),
For more details please refer datasheet.

Product Overview

N27P fulfils the requirements for devices 
mounted in standard modular switchgears.
Universal measuring input:
1/5 A 100/400 V AC
32/63 A, 100/400 V AC
Direct measurement (up to 63A),
Output:
RS-485 interface with MODBUS protocol,
1 x relay + 1 x analog or 2 x relay,
Modern graphical display in OLED technology,
Programmable current and voltage transformer ratios,
Meter configuration using button or free eCon software
For more details please refer datasheet.

Product Overview

N30P meter is designed to measure
AC voltage,AC current,active, reactive 
and apparent power, cos φ, tg φ, φ, 
frequency, active, reactive and apparent energy, 
15 min. active power, 10 min. voltage, 10 sec. 
frequency in single-phase power network.
Highlighted measuring units
4 alarm outputs with signalling by LED diodes, 
For more details please refer datasheet.

Product Overview

The N30H meter is destined for the measurement 
of DC current and DC voltage up to 5 A and 600 V.
The device fulfils the requirements of installation's
category III for the product designed.
Parameters which can be reprogrammed:
Display colour, individually in three intervals,
Thresholds of displayed overflows,
Precision of displayed results (decimal point),
For more details please refer datasheet.

Product Overview

The N25 Series Designed for measurement of d.c.voltage 
or d.c. current,temperature through Pt100 
resistance thermometers,J, K thermocouples, 
a.c. voltage and a.c. current.
5 LED digit displays with 14 mm digit high.
Parameters programmable by PD14 programmer:
precision of displayed results (decimal point),
measurement averaging time,
recounting of indications (individual characteristic),
automatic or manual compensation: cold junction 
temperature for measurement with thermocouples or 
wire resistance for measurement with Pt100 (N25T).
For more details please refer datasheet.

Product Overview

NA5PLUS comes with Single Channel input 
and NA6PLUS comes with dual Channel. 
These Bar-graph meters ensure high measurement 
accuracy and clear visualization of the measurements done
3 or 7-colour bargraph with programmable colour switching over.
Logging of the measured signal in porgramed time intervals 
Universal measuring input.
Programmable indication characteristic and bargraph magnifier.
Up to 8 programmable alarm outputs.
Arithmetical functions x2, √x.
Communication in Scada systems (rS485/modbus interfaces).
For more details please refer datasheet.

Product Overview

The N30O meter is destined for the measurement of pulses, 
frequency, rotational speed, period and worktime. 
The meter has 2 counter inputs to co-operate with an encoder. 
The meter counts also the actual and total value.
Input:
Number of pulses
Rotational speed
Output:relay(4),analog(1),digital RS-485/MODBUS(1)
For more details please refer datasheet.
 

Product Overview

The  N27D fulfils the requirements for devices 
mounted in standard modular switchgears. 
Designed for measurement of RMS current and voltage (AC), 
active power and frequency. Thanks to modern design,
Direct measurement up to 63A,
Switched measured value,
4-digit display in yellow colour,
Backlighted indicator of measured value,
Modern design allows for installation of the meter 
in modular switchgear in accordance with EN 62208
(meter has a width of 3 modules) on 35 mm rail.
External dimensions: 53 x 110 x 60mm.
For more details please refer datasheet.
 

Product Overview

N21 is an ideal solution for visualisation of industrial processes.
Universal input, universal supply and modern 
OLED display allow to apply meter in many applications.
Relay alarm output.
Universal supply voltage from 24 V up to 230 V AC/DC
Supply of object transducers 24 V DC
Meter configuration through mini-USB 
connector with free eCon software.
For more details please refer datasheet.

Product Overview

The N20 meter is a digital programmable panel instrument
designed for measurements of DC voltages, 
DC currents or temperature. 
Parameters of the N20 meter:
DC current: 0/4...20mA; ±20mA
DC voltage: 0...60mV; 0...10V; ±10V
Protection level ensured by the housing: IP65,
Readout field: 5 three-colour LED displays of 14 mm height,
For more details please refer datasheet.

Product Overview

Indicators of N24 series are designed for measurement 
of DC voltage or DC current, temperature from PT100 sensors 
and J, K thermocouples, AC voltage and AC current.
4-digit LED display, digits of 20 mm high,
Possible configuration of parameters through 
the PD14 programmer and the free delivered eCon Software
Precision of displayed results (decimal point),
Measurement averaging time,
Recounting of indications (individual characteristic),
Automatic or manual compensation: temperature of 
cold junction for measurements with thermocouples 
or wire resistance for Pt100 sensors (N24T),
For more details please refer datasheet.

Product Overview

The digital panel meters RISH DPM 72 x 144 4½ Digit 
have been designed for industrial applications, 
which frequently require precise and on-site adjustment
of the display range. It can be used in industrial 
automation and for laboratory uses.
Highly adaptable DPMs suitable for a wide
range of measuring applications.
For more details please refer datasheet.

Product Overview

The Digital panel meters RISH DPM 96 x 96 & 48 x 96 
4½ Digit have been designed for industrial applications,
which frequently require precise and 
on-site adjustment of the display range.
Industrial automation and for laboratory uses.
Auxiliary power supply :
AC: 1) 230V (+10% / -15%).
    2) 110V (+10% / -15%).
DC: 1) 110V (+10% / -15%).
    2) 24V (+/- 15%).
Highly adaptable DPMs suitable for a 
wide range of measuring applications.
For more details please refer datasheet.

Product Overview

The digital panel meters RISH DPM 72 X 144 1 PH. 
4½ ACI/ACV have been designed for industrial applications, 
which frequently require precise and on-site adjustment 
of the display range. It can be used in 
Industrial automation and for laboratory uses.
AC Current ranges and AC Voltage ranges available.
4 ½ Digit ultra bright Display with 26mm digit height.
For more details please refer datasheet.
 

Product Overview

RISH DPM 72X144 series measures system active Power 
(Import / Export),Reactive Power (Import / Export),
Apparent Power &Power Factor of Three phase and 
Single phase Network. It has 4 digit single line 
auto ranging LED display with polarity indication.
On site programmable PT/CT ratios
For more details please refer datasheet.

Product Overview

RISH DPM Power 96x96 series measures system active Power
(Import / Export), Reactive Power (Import / Export),
Apparent Power & Power Factor of Three phase and 
Single phase Network. It has 4 digit single 
line auto ranging LED display with polarity indication
Product Range
Active Power (kW) DPM.
Reactive Power (kVAr) DPM.
Apparent Power (kVA) DPM.
Power Factor (PF) meter.
On Site Programmable PT/CT Ratios 
User Selectable CT Secondary 5A/1A
For more details please refer datasheet.

Product Overview

RISH CD30/60 Compact VAF Meter measures electrical
parameters in 1 Phase Network for AC direct current
measurement application. 
% THD measurement upto 15th Harmon
True RMS measurement.
2 Line 4 digits ultra bright LED display
Direct current measurement upto 30/60 A depending on model
Fast & Easy Installation on housing with self clicking
For more details please refer datasheet.
 

Product Overview

RISH OPTIMA VAF measures important electrical parameters 
in 3 phase 4 Wire, 3 phase 3 Wire and 1 phase Network 
& replaces the multiple analog panel meters. 
It measures electrical parameters like AC Voltage, 
AC Current, Frequency & many more. 
The instrument also has an optional limit switch
True RMS measurement
Onsite programmable
Limit Switch (Optional)
3 line 3 digits Ultra Bright LED display
Run Hour, ON Hour, Number of Interruptions
Storage of Parameters possible
Parameter Screen recall
For more details please refer datasheet.

Product Overview

RISH Delta VAF measures important electrical parameters 
in 3 phase 4 wire, 3 phase 3 wire, 1 phase 2 wire 
and 1 phase 3 wire (split-phase) network. I
True RMS Measurement
3 Line, 4 Digit Ultra-bright LED display
Reliable and accurate measurement
Wide-range AC / DC auxiliary power supply  
On site programmable PT/CT ratios
Limit Output (Optional)
MODBUS (RS485) Output (Optional)
Display of minimum and maximum values
Password-protected setup mode
Low back depth-27mm
For more details please refer datasheet.

Product Overview

Single meter measures energy consumption of four
independent loads connected to one Voltage source
Event Logging
Data Logging
Load Profile Analysis
Direct Remote Access (optional)
Parameter Screen recall
4 - line 8 digit Ultra-bright LED Display
Reverse Locking
Onsite Configuration
Relay Functions
Enclosure Protection for dust and water
Compliance to International Safety standards
For more details please refer datasheet.

Product Overview

RISH EM series measures important electrical parameters 
in 3 phase and single phase Network & replaces 
the multiple analog panel meters. It measures electrical 
parameters like Active/Reactive/Apparent energy,power  
Energy billing
Electrical load monitoring
Sub-metering
Genset, Test Benches and Laboratories
True RMS measurement:
Measures distorted waveform up to 15th Harmonic.
For more details please refer datasheet.

Product Overview

RISH EM 2340DS is Dual Source Energy Meter 
which measures important electrical parameters 
of Utility and Generator in 3 phase and single phase 
network & replaces the multiple analog panel meters. 
This energy meter is on-site programmable and can 
measure more than 65 parameters including 
Active/Reactive/Apparent energy,Power,Total 
Harmonic Distortion (THD) measurement among others. 
True RMS measurement 
Energy as per IEC 62053
Onsite programmable
Direct remote access(Optional)
Limit (Alarm) or Pulse Relay Output(Optional) 
Configurable Error Diagnosis Mode 
For more details please refer datasheet.

Product Overview

RISH LM1340 measures important electrical parameters 
in 3 phase 4wire,3 phase 3wire and 1phase 2wire Network. 
It displays many parameters at a glance. 
It measures electrical parameters like 
Active/Reactive/ Apparent energy and all basic parameter. 
The instrument has two optional digital outputs available 
as pulse or alarm with programmable pulse duration and width.
This instrument also has two optional digital inputs for 
monitoring the external contact status, pulse counting 
and/or energy accumulation according to tariff.
Complaince of IEC 61557-12
Energy Measurement as per IEC 62053-22 / 23
Load Health Monitoring OV,UV,OC,UF,Unb. V/I, PF, PR
For more details please refer datasheet.

Product Overview

The RISH ML 1400 is a multifunction power meter
that can monitor and measure electrical parameters. 
It has an accuracy class of 0.5 and can be used 
for Class 1 or Class 0.5s applications.
Multiple circuit monitoring
Plug and play current transformer
Health monitoring of three phase load
Residual current monitoring and tripping
Prepaid tariff based tripping
Quick, easy, and error free current connections
Measures real time electrical parameters
Pulse output which can be used to drive an external
For more details please refer datasheet.

Product Overview

RISH ED1100 is a modern Energy Meter 
designed for intended use in residential, 
commercial and light industrial Electrical Energy Metering.
DIN Mounted Energy meter-Energy measurement
as per IEC 62053-21,23,IEC 61557-12,EN 50470-3 Class B
Direct Connected Energy meter with self powered
On display indication-Digital Input/Output 
Pulse outputs configurable for 
Import/Export Energy measurement 
Digital Inputs–Tariff Energy Accumulation· 
Optional SO Pulse output for energy
application along with 1 Digital Input 
For more details please refer datasheet.

Product Overview

The Rish Flex 48024A is a Power Supply of Single Phase.
This features allows the use of a smaller size unit to 
power demanding loads such as motors, solenoid valves, 
lamps and other loads with transient overload behavior
which would otherwise required an oversize power supply.
input: single-phase: 115 – 230 Vac
Frequency: 47 – 63 Hz 6%
Output: 24 Vdc 60°C
Efficiency up to 92%
Strong overload without switch-off, up to 50%
Flexible Power continuity : from 384 to 480W
For more details please refer datasheet.

Product Overview

The Rish Flex 24024A is a Power Supply of Single Phase.
This features allows the use of a smaller size unit to 
power demanding loads such as motors, solenoid valves, 
lamps and other loads with transient overload behavior
which would otherwise required an oversize power supply.
Short-circuit protection
Input: 115 – 230 Vac
Output: 24 Vdc 60°C
Efficiency up to 91%
Strong overload without switch-off, up to 50%
Flexible Power continuity : from 192 to 240 W
For more details please refer datasheet.
 

Product Overview

The Rish Flex 15048A is a Power Supply of Single Phase.
This features allows the use of a smaller size unit to 
power demanding loads such as motors, solenoid valves, 
lamps and other loads with transient overload behavior
which would otherwise required an oversize power supply.
nput: single-phase: 115 – 230 Vac
Output: 48 Vdc 60°C
Efficiency up to 91%
DIN Rail Mountable
Flexible Power continuity :from 120 to 150 W
Strong overload without switch-off, up to 50%
For more details please refer datasheet.
 

Product Overview

The Rish Flex 15024A is a Power Supply of Single Phase.
This features allows the use of a smaller size unit to 
power demanding loads such as motors, solenoid valves, 
lamps and other loads with transient overload behavior
which would otherwise required an oversize power supply.
Input: single-phase: 115 – 230 Vac
Output: 24 Vdc 60°C
DIN Rail Mountable
Efficiency up to 91%
Flexible Power continuity :from 120 to 150 W
Strong overload without switch-off, up to 50%
For more details please refer datasheet.

Product Overview

The Rish Flex 15012A is a Power Supply of Single Phase.
This features allows the use of a smaller size unit to 
power demanding loads such as motors, solenoid valves, 
lamps and other loads with transient overload behavior
which would otherwise required an oversize power supply.
Input: single-phase: 115 – 230 Vac
Output: 12 Vdc 60°C
Efficiency up to 91%
DIN Rail Mountable
Flexible Power continuity :from 120 to 150 W
Strong overload without switch-off, up to 50%
For more details please refer datasheet.

Product Overview

The Rish Flex 9012A is a Power Supply of Single Phase.
This features allows the use of a smaller size unit to 
power demanding loads such as motors, solenoid valves, 
lamps and other loads with transient overload behavior
which would otherwise required an oversize power supply.
Input: single-phase: 115 – 230 Vac
Output: 12 Vdc 60°C
Efficiency up to 91%
DIN Rail Mountable
Flexible Power continuity :from 95 to 120 W
Strong overload without switch-off, up to 50%
For more details please refer datasheet.

Product Overview

The Rish Flex-e 17024A is a 1-phase power supply
from Rishabh Instruments. 
It has following features:
Input: 115–230 Vac single-phase
Output: 24 Vdc 60°C
Power continuity: 120–180 W
Operating temperature: -25°C to 70°C with derating
Features: Can power demanding loads like motors, 
solenoid valves, lamps, and others
For more details please refer datasheet.

Product Overview

The Rish Flex-e 17024B is a 1-phase power supply
from Rishabh Instruments. 
It has following features:
Input: 200 – 500 Vac
Output: 24 Vdc 60°C
Efficiency up to 87%
Strong overload withstand capability
Flexible Power continuity :from 120 to 180 W
DIN Rail Mountable
Extremely small size
3 Year warranty
For more details please refer datasheet.

Product Overview

The Rish Flex-e 9024B 2-Phase power supply
from Rishabh Instruments. 
It has following features:
Input: 200 – 500 Vac
Output: 24 Vdc 60°C
Efficiency up to 87%
Strong overload withstand capability
Flexible Power continuity:from 95 to 120W
DIN Rail Mountable
Extremely small size
3 Year warranty
For more details please refer datasheet.

Product Overview

The Rish Flex - e 60xxA 1-Phase power supply
from Rishabh Instruments. 
It has following features:
Input: single-phase:85-264 VAC,124-370 VDC
Output: 24 Vdc +/- 3% (2.5A)
Nominal output voltage See Table 1
Adjustment range See Table 1
Rated current See Table 1
Efficiency greater than 87%
DIN Rail Mountable
3 Year warranty
For more details please refer datasheet.

Product Overview

The Rish Flex-e 45xxA 1-Phase power supply
from Rishabh Instruments. 
It has following features:
Input: single-phase:85-264 VAC,124-370 VDC
Output: 24 Vdc +/- 3% (2.5A)
Nominal output voltage See Table 1
Adjustment range See Table 1
Rated current See Table 1
Efficiency greater than 87%
DIN Rail Mountable
Extremely small size
3 Year warranty
For more details please refer datasheet.

Product Overview

The Rish PST 2430B 3-Phase power supply
from Rishabh Instruments. 
It has following features:
Input: three-phase 400 - 480 Vac
Output: One output 30 A - 24 Vdc
Strong overload without switch-off
Short-circuit protection
Over-voltage protection
Degree of protection: IP20
DIN Rail Mountable
Extremely small siz
For more details please refer datasheet.

Product Overview

The Rish Flex 50024B 3-Phase power supply
from Rishabh Instruments. 
It has following features:
Input: 3-phase: 400 – 500 Vac
Output: 24 Vdc 60°C
Efficiency up to 91%
Strong overload without switch-off, 
upto50%Flexible Power continuity : 
from480to600W“Power Good” Relay
DIN Rail Mountable
Extremely small size
For more details please refer datasheet.

Product Overview

The Rish PST 2440B 3-Phase power supply
 is extremely small size from Rishabh Instruments. 
It has following features:
Input: three-phase 400 - 480 Vac
Output: One output 40 A - 24 Vdc
Strong overload without switch-off
Short-circuit protection
Over-voltage protection
Degree of protection : IP20
DIN Rail Mountable
Extremely small size
For more details please refer datasheet.

Product Overview

The Rish Flex 6005A is a 1-Phase power supply
from Rishabh Instruments. 
It has following features:
Input: single-phase: 115 – 230 Vac
Output: 5 Vdc 60°C
Efficiency up to 82%
Strong overload without switch-off
Flexible Power continuity : 
up to 35WDIN Rail Mountable
Extremely small size
3 Year warranty
For more details please refer datasheet.
 

Product Overview

Desk top panel meters (3.5 Digit LED/ LCD) suitable
for measuring anyone of the following parameters
DC Voltage : +199.9mV, +1.999V, +19.99V, +199.9V, +100V
AC Voltage : 199.9mV, 1.999V, 19.99V, 199.9V, 750V
DC Current : +199.9mA, +1.999mA, +19.99mA, +199.9mA,
             +1.999mA, +19.99A
AC Current :199.9mA, 1.999mA, 19.99mA, 199.9mA,
            1.999A, +19.99A
Accuracy : +0.1%
Line Power Supply : 230V +10%, 50Hz 
Inbuilt Power Supply : +9VDC Battery operated 
For more details please refer datasheet.