Product Overview

Spectrum Analyzer is used for the early 
test in the development of electrical products,
troubleshooting of CATV/MATV system as well as
the test and trouble diagnosis of cellular 
phone/paging system.
Frequency Range :150KHz to1000MHz
4.5 Digit Display :Center & Marker Frequency,
0.1MHz Resolution
Amplitude Range :-100dBm to +13dBm
Filters : 20KHz, 250KHz & Video Filter
Full Range Built-in :0.15MHz to 1000MHz,
For more details please refer datasheet.

Product Overview

Spectrum Analyzer is used for the early 
test in the development of electrical products,
troubleshooting of CATV/MATV system as well as
the test and trouble diagnosis of cellular 
phone/paging system.
6.5'' TFT-LCD Display
Maximum input : -100 ~ +13dBm
Inbuilt Tracking Generator
Output level range: -50~+1dBm(in dB steps and var.)
128MB Data Storage Memory
PC interface using Software
For more details please refer datasheet.

Product Overview

DDS Signal Generator 10MHz/50MHz
(with Arbitrary Function)
Model MFG 2110 - 0.1Hz to 10MHz
Model MFG 2150A - 0.1Hz - 50MHz(4 Arbitrary Waveforms)
Using direct digital Synthesis (DDS) & AWG technology
It features high resolution,high accuracy, high stability,
Direct input using numerical keys,data can be continuously
adjusted using adjusting knobs
Multi waveforms are suitable for various application areas
Standard RS -232 interface, it can be connect with PC
Function Waveform: Sine, Square, Triangle, Positive Ramp, 
Negative Ramp, Random Noise, Sin (x), Indexup, Index down
For more details please refer datasheet.

Product Overview

Function Generators 2MHz/10MHz/15MHz 
(with AM/FM & Frequency Counter upto 30MHz)
Frequency 0.1Hz ~ 10MHz (For Model ME 900)
Frequency 0.1Hz ~ 15MHz (For Model ME 905)
Output Waveform: Sine,Square,Triangle,±Ramp,±Pulse
Voltage Control Frequency (VCF) capability
TTL/CMOS and output synchronous output
Less than 1% distortion at 10Hz ~ 100KHz
Less than 0.5dB frequency response at 0.1Hz~100KHz
1Hz~30MHz Frequency Counter
AM & FM Output
For more details please refer datasheet.
 

Product Overview

Function Generator 5MHz (with Frequency Counter upto 30MHz)
Frequency 0.1Hz ~ 5MHz in 7 ranges
Output Waveform: Sine, Square, Triangle, ±Ramp, ±Pulse
TTL/CMOS output
1Hz~10MHz Frequency Counter
Attenuation: 20dB; 40db & 60dB (20+40dB)
Output Voltage -5V~0V ± 10%
Max. volt-controlled 1000:1
Input Signal DC ~ 1KHz
Input Impedance Not less than 1Mohms/ 20pF
For more details please refer datasheet.

Product Overview

Signal Frequency 0.1Hz~15MHz, continuously
variable waveform Square & Sine
Output attenuator 0dB, 20dB, 40dB, 60dB
Output level 20V p-p in open circuit, not less
than 10V p-p with 50ohms load
Not more than 35ns rising edge of square with in 2MHz
Sine distortion less than 2%,
amplitude-frequency Characteristics:±0.5dB with in 2MHz,
-3dB above 10MHz
Frequency : 20Hz~30KHz
Power supply : 230V±10%, 50Hz
For more details please refer datasheet.

Product Overview

Analog RF Signal Generator 100KHz ~ 150MHz
Advanced Circuit design with imported components 
ensure minimum accuracy deviation
Signal Frequency: 100KHz~150MHz, 3 harmonic up to 450MHz
Output Waveform: Sine and Amplitude modulation wave
RF/AM output, max, intensity > 10V p-p
External modulation signal can be set between 50Hz~20KHz
Frequency accuracy: ±3%
Output waveform RF/AM signal waveform
Output impedance 600ohms
Radio Frequency Over 100mVrms (when frequency <35MHz)
For more details please refer datasheet.

Product Overview

DDS Function (Arbitrary) Generator
Two same function output 
Using Direct Digital Synthesis (DDS) Technology
1 u Hz - 80 MHz frequency range for main wave forms
High accuracy frequency counter
Arbitrary Setting of start and stop of frequency
sweep output More than 50 kind of output waveform
(Arbitrary Optional)
4.3'' TFT color display
Standard USB(H),USB(D) and Optional LAN interface
PC interface using Software
For more details please refer datasheet.

Product Overview

Frequency Counter 2.4GHz
8 digit green LED display with annunciators
Two channels, operation mode memory
Range and gate time adjustable
High safety design.
Frequency measurement : 10Hz~2.4GHz
Crystal measurement : 3.5MHz~16MHz
Channel A (50MHz~2.4GHz)
Input resistance: 50ohms,
Maximum Input : 3V
Channel B (10Hz~50MHz)
Sensitivity : 25m/80mVrms, 
For more details please refer datasheet.

Product Overview

Function Generator 1Hz to 200KHz with 
Digital Frequency Counter
"MARS" made Audio Frequency Function Generator 
is ideally suited to electronics test bench.
It is ideally suited to perform experiments 
of Amplifier, Operational amplifier, Frequency 
Response of Filters etc.
Display : LCD type displaying setted frequency 
& type of waveform selected.
Frequency Counter : Int / Ext ( up to 20Mhz)
FREQUENCY RANGE : 1Hz - 200KHz in six steps.
For more details please refer datasheet.

Product Overview

Programmable DC Power Supply (0~36VDC/3Amps)
High stabilized programmable voltage/current
power outputs
Menu operation by front keypad and rotary switch
Large LCD display with backlit
Output continuously adjustable output
Maximum current/power output presetable
Constant current/voltage/power output mode
Over current, voltage and over power protection
Memory: Store & recall setup data for diff. applications
Series/parallel connections
For more details please refer datasheet.